Brands
High-quality tapered roller bearing kit for steering heads by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Contains all bearings and seals required for installation High-quality OE replacement ball bearing or a direct replacement for cone storage Specially crafted lip seals that protect against dirt and water, also keeping the bearing grease clean Suitable for: Suzuki RM125 2005-2008 RM250 2005-2008 RMZ450 2005-2007 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-speed rear wheel bearing kit by ALL BALLS RACING, suitable for the below-mentioned KTM models. Specifications Conforms to ABEC-3 tolerance class Specially crafted lip seals that protect against dirt and water, also keeping the bearing grease clean Bearing grease containing rust protection and antioxidant, applicable for a temperature range between -29°C and 177°C Suitable for: KTM 640 LC4 2005 950 Adventure 2003-2005 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality front fork seal gasket set by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Improving the breakaway torque and providing up to 3x less friction than the OE parts Patented Max-Life production process, increasing the durability by 3 to 4 times Each gasket featuring 3 seals Suitable for:Gas-Gas EC250 12EC450FSR 09SM450FSR 09Husaberg 390FE 10-11450FC 01-05 450FE 04-11450FE-E 01-03450FS-C 01-06450FS-E 01-08450FX 10-11450FX-E 01-03550FE 07-08550FS-E 07570FE 09-11570FS 10-11650FC 04-05650FE 04-08650FS-C 04-08650FS-E 04-08FE250 13-14FE350 13-14FE450 14FE501 13-14TE250 11-14TE300 11-14HusqvarnaFC 250 (EURO) 15FC 450 (EURO) 15FE 250 14-16FE 350 14-21FE 350s 15-21FE 450 14FE 501 14-15FE 501s 15-16FX 350 17-22TC 125 14-17TC 250 14-16TE 125 15-16TE 250 14-16TE 300 14-16 KTMAdventure 640 01-07Adventure 950 04-06Adventure 990 07-13Enduro 690 08Enduro R 690 09-14EXC 125 03-09EXC 200 03-05EXC 250 03-05EXC 300 03-05EXC 450 03-14EXC 500 12-15EXC 525 03-07EXC 530 09-11EXC-F 350 12-15EXC-R 450 08EXC-R 530 08LC4 640 05Rallye 660 01-05Rallye 660 Factory Replica 06-07Rallye 690 Factory Replica 08-09Super Enduro 950 07SX 125 03-16SX 144 07-08SX 150 09-16SX 200 03-04SX 250 03-16SX 450 03-06SX 525 03-06SXC 625 05SX-F 250 05-16SX-F 250 Factory Edition 15SX-F 350 11-16SX-F 450 07-16SX-F 450 Factory Edition 15SX-F 505 08TriumphTiger Explorer 1200 XC/XCA/XCX/XR/XRT/XRX 2016 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality front fork seal gasket set by ALL BALLS RACING including dust covers, suitable for the below-mentioned models. Specifications Improving the breakaway torque and providing up to 3x less friction than the OE parts Patented Max-Life production process, increasing the durability by 3 to 4 times Each gasket featuring 3 seals Dust covers coated with a special lubricant improving the responding qualities Suitable for: HondaCR125R 1984-1986CR250R 1982CR480R 1982Yamaha XT660 R/X 2004-2016XTZ660 1991-1995XTZ750 1989-1995YZ125 1986-1988YZ250 2T 1983-1988YZ490 1983-1990 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality front fork Dust Cover set by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Dust covers coated with a special lubricant improving the responding qualities Suitable for: Gas-Gas with Oehlins EC125 2003-2008 EC200 2003-2008 EC250 2003-2008 EC300 2003-2008 EC450FSE 2003-2006 EC450FSR 2007-2008 Husaberg 390FE 2010-2011 450FC 2001-2005 450FE 2004-2011 450FE-E 2001-2003 450FS-C 2001-2006 450FS-E 2001-2008 450FX 2010-2011 450FX-E 2001-2003 550FE 2007-2008 550FS-E MY 2007 570FE 2009-2011 570FS 2010-2011 650FC 2004-2005 650FE 2004-2008 650FS-C 2004-2008 650FS-E 2004-2008 FE250 2013-2014 FE350 2013-2014 FE450 MY 2014 FE501 2013-2014 TE250 2011-2014 TE300 2011-2014 Husqvarna FC 250 (EURO) MY 2015 FC 250 2014-2016 FC 350 2014-2016 FC 450 (EURO) MY 2015 FC 450 2014-2016 FE 250 2014-2016 FE 350 2014-2016 FE 350S 2015-2016 FE 450 MY 2014 FE 501 2014-2015 FE 501S 2015-2016 TC 125 2014-2016 TC250 2014-2016 TE 125 2015-2016 TE 300 2014-2016 TE250 2014-2016 KTM EXC 125 2002-2009 EXC 200 2002-2005 EXC 250 2002-2005 EXC 300 2002-2005 EXC 450 2002-2014 EXC 500 2012-2015 EXC 525 2003-2007 EXC 530 2010-2011 EXC-F 350 2012-2015 EXC-R 450 MY 2008 EXC-R 530 2008-2009 SX 125 2002-2016 SX 144 2007-2008 SX 150 2009-2016 SX 200 2003-2004 SX 250 2002-2016 SX 380 MY 2002 SX 400 MY 2002 SX 450 2003-2006 SX 520 MY 2002 SX 525 2003-2006 SXC 625 MY 2005 SX-F 250 2005-2016 SX-F 350 2011-2016 SX-F 450 2007-2016 SX-F 505 MY 2008 640 Adventure 2001-2007 660 RALLY FACTORY REPL. 2006-2007 660 RALLYE 2001-2005 690 Enduro + R 2009-2014 690 RALLY FACTORY REPL. 2008-2009 950/990 all 2003-2013 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality ABS sensor guard by ALTRIDER, custom-made for the below-mentioned, liquid-cooled BMW R 1200/1250 GS models. The BMW water boxer is a machine that lets riders take on expeditions across several continents and in every condition. The ABS sensor is a critical and expensive component that detects wheel speed, calculates traction control, and performs other dynamic functions for smooth operation. The ALTRIDER ABS sensor guard protects this vulnerable unit to ensure riders are able to get the most out of their increasingly sophisticated BMWs. ALTRIDER’s ABS sensor guard installs quickly and easily. The design hugs the mount point and is the only design with an anti-rotation tab. Machined from 1/16 inch (1.5 mm) thick laser-cut stainless steel, the guard is a slick addition to the front wheel hub while providing much needed protection. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for BMW R 1200 and 1250 GS LC / Adventure, R, RS and RT 1/16 inch (1.5 mm) thick stainless steel construction Laser cut, grain finished, formed All hardware included Simple 5-minute installation Protects the ABS sensor from debris Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality ABS sensor guard by ALTRIDER, custom-made for the below-mentioned BMW R1300 GS / GSA models. The ABS sensor is a critical and expensive component that detects wheel speed, calculates traction control, and performs other dynamic functions for smooth operation. The ALTRIDER ABS sensor guard protects this vulnerable unit to ensure riders are able to get the most out of their increasingly sophisticated BMWs. ALTRIDER’s ABS sensor guard installs quickly and easily. The design hugs the mount point and is the only design with an anti-rotation tab. Machined from 1/16 inch (1.5 mm) thick laser-cut stainless steel, the guard is a slick addition to the front wheel hub while providing much needed protection. Specifications 100% designed and manufactured in the USA Material: Extremely durable billet aluminiumMade from one piece All hardware and installation guide (???) included Quick and easy to install Fits BMW R1300 GS and GS Adventure Available in black anodised (???) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable side stand by ALTRIDER, custom-made for the Aprilia Tuareg 660 model. The ALTRIDER Adjustable Side Stand is the only side stand for the Aprilia Tuareg 660 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1.5 inches (3.8 cm) higher than factory, and 1.5 inches (3.8 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned BMW models.The BMW R1200 and R1250 GS/GSA models are known for their large tilt angels, which cause the OEM side stands to easily sink into soft earth, gravel, or other uneven surfaces.The extremely robust ALTRIDER side stand featuring an infinite height adjustment and an enlarged foot plate reliably helps avoiding this unpleasant situation. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USAMade of tough steel and aluminium Infinite adjustable height setting, allowing heights of up to 1.7 inch (about 4.5 cm) higher than factory, or 0.25 inches (about 0.6 cm) lower than factory Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded springWorks with the original side stand sensor Available in black Fits: BMW R1200 GS/GSA from MY 2013BMW R1250 GS/GSA from MY 2013 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Height-adjustable side stand in proven ALTRIDER quality, custom-made for the BMW R1300 GS models.This high-quality side stand fits all of the a. m. BMW models with a wide range of suspension travel lengths. It works not only for lowered models, but also for higher ones.The BMW R1300 GS is known for its large lean angle. Lifting the heavy GS off the factory side stand can be a challenge, especially for smaller riders, as BMW also designed the side stand for heavy loads. ALTRIDER has developed a durable side stand for these situations that suits every chassis height and loading situation. The result is two-piece, built to last, and easy to adjust. Specifications Designed and manufactured in the USAAdjustable from stock length to +50mm (2") in 6mm (0,25") incrementsThe foot provides a large and stable contact area, regardless of terrain or chassis heightEnlarged integrated foot: A significantly larger, convex footprint with a serrated foot design for maximum grip - no more sinking or tipping into soft groundRemovable kickstand footpeg for easier deployment - no more awkward grippingSolid aluminum construction: Designed to support the weight of a fully loaded BMW R1300 GSIntegrated rubber bumper to prevent rattling - no risk of lossInstallation by using stock parts and spring - spring tensioning tool includedCompatible with the factory side stand switchAvailable in black Fits: BMW R1300 GSBMW R1300 GS Adventure Item number R130-2-2301 fits the following BMW side stand numbers: 4653 1636279 - Standard GS models4653 1638616 - Height-adjustable GS & Comfort (lowered) GSA Item number R130-2-2302 fits the following BMW side stand numbers: 4653 5A8DC01 - Adaptive GSA4653 1638149 - Standard GSA & Sport Suspension GS Please note: It is necessary to check all the pre-assembled fasteners and components, as they may not be factory-applied with Loctite. Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original BMW side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned Honda models. The ALTRIDER Adjustable Side Stand is the only side stand for the CRF1000L and CRF1100L Africa Twin that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Fits: Honda CRF1000L Africa Twin/ ADV Sports Honda CRF1100 Africa Twin/ ADV Sports Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable side stand by ALTRIDER, custom-made for the models mentioned below. The ALTRIDER Adjustable Side Stand is the only side stand works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA Adjustable height settings, including factory height, 0.5 inch (1.3 cm) longer than factory, or 1.5 inch (3.8 cm) shorter than factory Foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot (+20%), preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Fits: KTM 690 Enduro Husqvarna 701 Enduro GasGas ES 700 Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original KTM cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable side stand by ALTRIDER, custom-made for Yamaha Tenere 700 models MY 2019-2024. The ALTRIDER Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original YAMAHA cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable windscreen risers by ALTRIDER, custom-made for the Yamaha Tenere 700 MY 2019-2024 (see below). The Yamaha Tenere 700 is a great all around bike for both on- and off-road riding. However, most riders find that the windscreen is just not tall enough, and are hit with wind buffeting, bugs to the visor and excess noise. To alleviate these issues, ALTRIDER designed an adjustable windscreen riser for the Yamaha Tenere 700, with a minimum 10mm rise over stock at the lowest setting and a 90mm adjustment range, for a total 100mm increase at the highest setting over the stock windscreen. Given the ultimate range of adjustment, the ALTRIDER Windscreen Riser can eliminate buffeting for a wide range of riders' heights. Specifications Designed and manufactured in the USA CNC-machined from 6061 T6 aircraft-grade aluminum Variably adjustable with a minimum height increase of 10 mm and a maximum increase of 100 mm Easy to install within minutes using the included hardware Adjustable on the fly with CNC-machined knurled thumb nuts - no tools required Laser-etched ALTRIDER "A" and "T7" logos Compatible with the ALTRIDER T7 Cowl Support (available separately, see below) as well as any GPS mounts and handlebar risers Anodized black finish Suitable for:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024NOTE: Delivery does NOT include any windscreens! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, oversized billet foot pegs by the US manufacturer ALTRIDER, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. For further information, please see below. Specifications Precision-made of heavy duty, high-quality 6061-T6 billet aluminum Tread area size: 2,28" x 4,8" (58 mm x 122 mm) - depth x width Surface equipped with several screwed pins for a maximum grip and braking sensation Specifically designed to prevent most dirt and mud from clinging to the pegs Delivery includes 2 uprated springs and all the necessary mounting material Available in black anodised Suitable for: Husqvarna Husqvarna Norden 901 (2022+) Husqvarna 701 (2016+) KTM KTM 690 Enduro R (2008+) KTM 790 ADV S / R (2019-2020) KTM 890 ADV R (2021+) KTM 950 Adventure (2003-2006) KTM 990 Adventure (2006-2012) KTM 1090 Adventure R / S KTM 1290 S Adventure S KTM 1290 Super Adventure R / S / T KTM 125 EXC / SX (1998-2016) KTM 150 SX / XC (2010-2016) KTM 200 EXC / XC-W (2006-2016) KTM 250 EXC / SX / XC / XCF-W (2006-2016) KTM 300 EXC / XC (2006-2016) KTM 350 EXC-F / SX-F / XCF-W (2012-2016) KTM 400 EXC (2009-2011) KTM 450 EXC / SX-F / XC-W (2009-2016) KTM 500 EXC / XC-W (2012-2016) KTM 530 EXC / XC-W (2009-2011) KTM 990 Supermoto R / T (2013) KTM Freeride 250 F / R (2015-2016) KTM Freeride 350 (2012-2016) KTM Freeride E-XC (2015-2016) Yamaha Yamaha Tenere 700 (2019+) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications 100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
The resilient face of this headlight guard by ALTRIDER for BMW R1200 GS is precision cut from impact-resistant polycarbonate which is formulated with a hardened, scratch-resistant surface both front and rear. The face attaches to the stainless steel frame with a sturdy, custom-machined aluminum ball-and-rubber socket connection which is free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The polycarbonate guard is also interchangeable with all other versions of the ALTRIDER headlight guard. NOTE: This version of the ALTRIDER headlight guard features an extension in the design to protect the LED heat sink or any accessory lights located beneath the main headlight. It is NOT compatible with the BMW R1200 GSW Adventure! The stainless steel frame of the polycarbonate headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. The installation is simple and does not require removal of the blinker stalks or any bodywork. The top is mounted using the OEM bolts while the bottom uses the provided stainless steel hardware. The metal frame is laser-cut and grain finished. The frame is available in a powder-coated black finish which is incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights. The ALTRIDER polycarbonate headlight guard also includes a specially designed glare guard. This durable vinyl decal attaches to the wind deflector below the windshield. The refined matte finish prevents light from reflecting off the windshield into the rider's eyes. Please note – while polycarbonate is an incredibly tough material, chemical based cleaners will rapidly break down the material (ex. alcohol, Windex, etc). Only warm water and mild soap should be used to clean the polycarbonate headlight guard. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Polycarbonate face resistant to impacts and specially treated to harden the surface to resist scratches Extended version - protects LED heat sink or accessory lights below headlight Custom-machined ball-and-socket connections allow removal of face without any tools Polycarbonate headlight guard interchangeable with all other versions of the ALTRIDER headlight guard Stainless steel frame provides strong foundation and is highly resistant to rust and weathering Compatible with halogen and LED headlights Fits BMW R1200 GS Frame available in powder-coated black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, clear headlight guard by ALTRIDER made of tough polycarbonate, suitable for the BMW F 750 / 850 GS models. The front ends of the above-mentioned BMW models sport a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in powder-coated black NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
The resilient face of this high-quality headlight guard by ALTRIDER for the BMW R 1200/R 1250 GS and GSA LC is precision-cut from impact-resistant polycarbonate – the same material as used in bullet-proof windows. This polycarbonate is formulated with a hardened, scratch-resistant surface on both front and rear. The face attaches to the stainless steel frame with a custom-machined, sturdy aluminum ball-and-rubber socket connection which is free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The polycarbonate guard is also interchangeable with all other versions of the ALTRIDER headlight guard. The stainless steel frame of the polycarbonate headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. Unlike other available headlight guards, installation is simple and does not require removal of the blinker stalks or any bodywork. The top is mounted using OEM bolts, while the bottom uses the provided stainless steel hardware. The metal frame is laser-cut and grain finished. The frame is available in a powdercoat black finish which is incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights. The ALTRIDER polycarbonate headlight guard also includes a specially designed glare guard. This durable vinyl decal attaches to the wind deflector below the windshield. The refined matte finish prevents light from reflecting off the windshield into the rider's eyes. Please note – While polycarbonate is an incredibly tough material, chemical-based cleaners will rapidly break down the material (ex. alcohol, Windex, etc). Only warm water and mild soap should be used to clean the polycarbonate headlight guard. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Polycarbonate face resistant to impacts and specially treated to harden the surface to resist scratches Custom-machined ball-and-socket connections allow removal of face without any tools Polycarbonate headlight guard interchangeable with all other versions of the ALTRIDER headlight guard Stainless steel frame provides strong foundation and is highly resistant to rust and weathering Compatible with halogen and LED headlights Frame available in powder-coated black finish Compatible with BMW R 1200/R 1250 GSW and GSW Adventure Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black Note: NOT compatible with the OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Standad (does NOT fit the Adventure Sports models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Improper cleaning can result in scratches, hazing, surface crazing and cracking. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black NOT compatible with OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Adventure Sports (does NOT fit the Standard models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality clear headlight guard by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. Constructed in the United States from 3/16 inch (4.7 mm) thick scratch-resistant polycarbonate, the ALTRIDER headlight guard is made of extremely strong, impact-resistant polycarbonate - the same material as bullet-proof windows. This material is formulated with a hardened scratch-resistant surface, both front and rear. The dual lenses are secured with two 1/16 inch (2 mm) laser-cut textured powder coat steel brackets that are extremely resistant to rust and weathering.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets, using custom-machined aluminum ball studs and rubber sockets to mount the lens to the frame. The no-tools quick-release system allows for easy removal of the face for cleaning. NOTE: Polycarbonate will react to certain chemicals and requires specific care to be cleaned correctly and kept looking good for the long haul. Improper cleaning can result in scratches, hazing surface and cracking. Specifications 100% designed and manufactured in the USA Polycarbonate lens protects headlight without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated Suitable for:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Aprilia Tuareg 660 model. While the OEM Aprilia clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a rider's hand and forearm. The ALTRIDER extension helps reducing the rider's fatigue, at the same time increasing the clutch feel. Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized black Note: This clutch arm does not feature any cut-in splines. As soon as it is tightened around the clutch rod, the aluminum of the clutch arm will bite into the splines on the clutch rod. The aluminum facilitates a secure connection that does not slip, at the same time offering a lightweight design. Caution: There are known reports of casting flaws with the original Aprilia clutch cover. Do not over tighten the M8 bolt in the clutch cover that attaches the cable, as it may cause damage to the clutch cover. <iframe width="560" height="315" src="https://www.youtube.com/embed/ojMm_COsArg?si=M8aAse0v1oG6gTW2" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/x_DU8FDP3Dw?si=prckqGWnXhHSyf1q" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Honda CRF1000L and CRF1100L Africa Twin/ ADV Sports models. While the OEM Honda clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a riders hand and forearm. The ALTRIDER extension helps reducing the riders' fatigue, at the same time increasing the clutch feel. Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized black NOTE: Not compatible with any DCT models, nor with the SW-MOTECH Crash Bars or the ALTRIDER Clutch Arm Guard! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage