High-quality radiator guard by ALTRIDER, suitable for the BMW R 1200 GSW. Made from 1/16” (1.6 mm) anodized aluminum, the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris, while simultaneously directing airflow through the radiator to keep the water boxer cool. The guard is held in place using OEM hardware and the stock radiator shroud. Installation is a breeze – simply remove the three bolts holding the shroud in place, insert the guard, and reinstall the shroud. There are no spacers to deal with or hardware to add, and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 1.6 mm anodized aluminum protects radiator from dangerous debris Louvered design provides coverage without restricting airflow Simple to install with the provided hardware Fits BMW 1200 GS water cooled Available in anodized silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality rear brake master cylinder guard by ALTRIDER, suitable for the BMW R 1200/R 1250 GS and Adventure LC. The a. m. BMW models check in at over 500 pounds without a rider - requiring every bit of braking power to stop in a hurry. This custom-made rear brake reservoir guard by ALTRIDER provides reliable safety for the rear brakes. Constructed from lightweight aluminum, the the guard keeps errant rocks and debris from taking out the rider's ability stop. The deliberate design of the guard locks the cover in place, preventing contamination of the delicate braking system.  Available in anodized silver or black. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Anodized aluminum provides robust yet lightweight protection Compatible with R 1200/R 1250 GSW + GSW Adventure Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Bent clamp connector by BARKBUSTERS, replacing the straight one for additional hose/cable clearance. Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality radiator guard by ALTRIDER, suitable for the BMW R 1200 GSW Adventure, MY 2014-2017. Made from 1/16” (1.6 mm) anodized aluminum, the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris, while simultaneously directing airflow through the radiator to keep the water boxer cool. The guard is held in place using OEM hardware and the stock radiator shroud. Installation is a breeze – simply remove the three bolts holding the shroud in place, insert the guard, and reinstall the shroud. There are no spacers to deal with or hardware to add, and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 1.6 mm anodized aluminum protects radiator from dangerous debris Louvered design provides coverage without restricting airflow Simple to install with provided hardware Fits BMW 1200 GS Adventure water cooled - MY 2014-2017 Available in anodized silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clutch arm guard by ALTRIDER made of tough aluminum, suitable for the Honda CRF 1000 L Africa Twin model (see below). The Africa Twin’s clutch articulation arm and cable sit exposed on the right hand side of the engine case, covered only by an OEM plastic cover which offers virtually no protection. ALTRIDER’s clutch arm guard for the Africa Twin replaces the plastic cover with far greater coverage to this vital area while offering a clean aesthetic to the right side engine case.More robust than other clutch arm covers on the market, ALTRIDER’s design incorporates three unique mounting points to evenly distribute the load from impacts across the guard. With strategic mounting points and bends, the design is engineered to counter the stresses placed on thin aluminum parts after a lifetime of engine vibrations. ALTRIDER’s clutch arm guard is laser-cut out of 2 mm thick 5052 aluminum and features a formed, anodized and grained surface for maximum durability. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum for robust yet lightweight protection Suitable for Honda CRF 1000 L Africa Twin, including Adventure Sports (NON-DCT-only!) Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality skid plate by the renowned US manufacturer ALTRIDER, suitable for the Yamaha Super Tenere XT1200Z. Rocks and debris are no match for this extremely robust skid plate featuring hand TIG welds and stainless hardware. Constructed of 1/8 inch (3.175 mm) powder coated aluminum, it reaches high on the left hand side to protect the stator, and provides extensive coverage of the headers on the right. The skid plate must be removed to change the oil filter. If using an aftermarket oil filter, it must be the same 2.5 inch (63.5 mm) length as the OEM one to avoid interference. However, the oil alone can be changed with the skid plate installed. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Made of 1/8 inch (3.175 mm) powder coated aluminum with hand TIG welds 1/8 inch (3.175 mm) powdered coated steel hand TIG welded brackets replace the thin stamped sheet bracket to resisting bending upon impact The rear bracket is constructed from 3/16 inch (4.7625 mm) powdered coated steel and utilizes two mounting points on each side to resist pivoting upon impact Plate to be fixed on 4 OEM mounts for a better force distribution and long-term durability Various cutouts for an improved engine heat dissipation Smooth surface to facilitate sliding over obstacles Compatible with Yamaha Super Tenere XT1200Z (2010-current) Compatible with both ES and non-ES versions Available in silver and black - please select from above Note: The ALTRIDER skid plate for Yamaha Super Tenere will NOT work with the OEM Yamaha crash bars because of the interference with the crossbar on the crash bars. The skid plate will mount up, but the cross bar will have to be removed! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

This high-quality ALTRIDER skid plate suitable for the below-mentioned Husqvarna and KTM models is laser cut from aluminum with an anodized finish that is extremely resistant to weathering. The intelligent design features large radius corners and flared edges to provide absolute coverage for the motor, clutch pack, and stator while maintaining exceptional strength. The skid plate also provides coverage for the side stand mount, eliminating the need for a side stand relocation kit. Special consideration was made to preserve the impressive ground clearance and turning radius of the Husqvarna / KTM.  The front of the skid plate mounts via steel brackets that utilize OEM mounting points, whereas the rear brackets are made of 3/16" (4.76 mm) aluminum. With the ALTRIDER design being the only one to provide anti-clocking engagement points at the rear; what this means in terms of protection is this design will resist rearward energy by interfacing the frame centerstand stops. The centerstand mounts are the strongest locations on the frame, originally engineered to take massive loads. Prevent the plate from rotating rearward is critical, without ANTI-CLOCKING the rock impacts will push the skid plate back and up into the motorcycle causing damage. ALTRIDER created the only design on the market to prevent this with the anti-clocking mounts. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum that protects front and bottom of the motor from trail debris Front and rear mounts for superior strength Fits both the Adventure and Adventure R Available in silver or black - please select from above Suitable for: Husqvarna 901 Norden 2022+ KTM 790 Adventure/R  2019-2022 KTM 890 Adventure/R  2019-2022 NOTE: Skid plate does NOT fit with a center stand installed!              Also does not fit any KTM-models from MY 2023! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned Suzuki models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (all available separately, see below) Suitable for: Suzuki V-Strom 800DE from MY 2023 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar End Weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (see below) Suitable for:  BMW F 800 GS MY 2024+BMW F 800 GS Sport MY 2024+BMW F 800 GS Triple Black MY 2024+ Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor