Cross Equipment
High-quality set of 2 front fork seal covers by KRIEGA, offering an effective protection from mud and dirt. The KRIEGA covers are fixed by velcro, making them extremely easy to fit, which means no fork disassembly is required. They can be fitted without cable ties, but it is recommended to use the ties for an increased service life by protecting the covers' material from the fork slider. Specifications Made from tough NEOSKIN (coated neoprene) Delivered in pairs Weight: 30 grams Universal fit by velcro - hook and loop design Easy to clean for more efficiency No fork disassembly required Use with or without cable ties USD fitment only 3M Scotchlite reflective print Available in black with silver logos Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
Haul loop by KRIEGA made of tough synthetic material, fitting the front fork of dirt bikes. Front fork straps are an essential equipment for extreme enduro events. KRIEGA's unique design is a self-supporting/semi-rigid solution, which is always easy to find and use. Specifications Abrasion-resistant reinforcement made of Hypalon® TOUGHTEK - grips wet or dry Stainless steel buckles 10-year guarantee - learn more Fitting There are 2 methods of fitting the front Haul Loop. Both use 2 x heavy-duty cable ties: Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp. Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic. The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
High-quality and practical hands-free, in-helmet kit for hydration packs by KRIEGA, specifically designed for use in combination with the KRIEGA 3-litre HydraPak® reservoir and 2-litre HydraPak® Shape Shift Reservoir. Designed for racing conditions when it is safer to keep both hands on the handle bars and concentrate on riding, this kit positions the soft bite valve of the hydration tube permanently near the rider's mouth, providing fast and safe hands-free hydration. A flexible white silicone tube fits along the base of the helmet with a Velcro® patch fixing to the inside of the helmet under the cheek pads. The tube pushes through a hole in the front air vent so that the soft bite valve is in the right position. A quick-release dry-break valve makes it easy to remove the helmet whilst wearing a backpack. The dry-break valve connects to the existing big-bore insulated tube on the KRIEGA Hydro-3 or existing clear tube on the KRIEGA Hydro-2. Specifications White silicone tube with KRIEGA branding Weight: 55 g Soft bite valve Easy fit by Velcro® tube management Quick-release dry-break connector Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
Lightweight, high-quality KRIEGA hydration pack including a 2-litre Hydrapak® Reservoir. The HYDRO 2 provides tough, long lasting performance essential for the rough and tumble world of off-road riding. Incorporating KRIEGA’s Quadloc-lite™ system, the harness is angled away from the underarms, giving total freedom of movement. An optional waist strap is included for the extra demands of riding off-road. The main compartment featuring the above-mentioned hydration reservoir sealed with a genuine YKK® water-resistant zip. The reservoir comes with a reinforced slider and Hydrofusion-insulated big-bore tube with 45° twist-lock bite valve, including a hands-free-kit. Specifications Size: 310 mm x 175 mm x 60 mm (H x W x D) Volume: 2-litre reservoir capacity Made of 420D ripstop nylon with Hypalon® abrasion-resistant reinforcements YKK® water-resistant zips Removable waist strap Including 1 drinking tube featuring a 45° mouthpiece and hands-free-kit Reflectors at front and back 10-year guarantee <iframe width="800" height="450" src="https://www.youtube.com/embed/aSjGRF5ECgA" title="KRIEGA HYDRO-2 HYDRATION PACK now including a Hands-Free Kit" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
Lightweight, high-quality KRIEGA hydration pack including a 3-litre military grade Hydrapak® Reservoir. The HYDRO 3 provides tough, long lasting performance essential for the rough and tumble world of off-road riding. Incorporating KRIEGA’s Quadloc-lite™ system, the harness is angled away from the underarms, giving total freedom of movement. An optional waist strap is included for the extra demands of riding off-road. A small side pocket allows access to smaller tools, energy bars etc. with the main compartment featuring the above-mentioned hydration reservoir. Both are sealed with genuine YKK® water-resistant zips. The 0.4 mm thermo-polyurethane-made reservoir is twice as thick as standard consumer models and comes with a reinforced slider and Hydrofusion-insulated big-bore tube with 45° twist-lock bite valve. A rear shock-cord provides extra external storage, ideal for a rain jacket or spare gloves. Specifications Size: 400 mm x 170 mm x 70 mm (H x W x D) Volume: 3-litre reservoir capacity plus 1 litre additional (dry) space (side access pocket) Made of 420D ripstop nylon with Hypalon® abrasion-resistant reinforcements YKK® water-resistant zips Removable waist strap Including 1 UV-proof, insulated neoprene drinking tube featuring a 45° mouthpiece Schoeller® DYNATECH® reflectors with intergrated 3M® Scotchlite® at front and back Add-on 5- or 10-litre US-Drypack and/or Harness Pocket storage (each available separately) 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
High-quality, 100% waterproof bolt-on fender pack by KRIEGA. Ideal for carrying safety equipment, small tools, dry gloves etc. on a motorcycle. Specifications Material: 1000D Dupont® Cordura® Ultra-tough, abrasion-resistant RHINOTEK fabric on base with 4 x heavy-duty rivets DRYPACK = taped-seam liner, fixed with Velcro® 100% waterproof Size: 200 mm x 175 mm x 70 mm (L x W x H) Volume: 2.5 litres Velcro® closure strap 10-year guarantee Delivery includes: 4 x CNC 6061-T6 alloy fasteners with nylon spacer washers 4 x stainless steel fasteners 1 drilling guide (product packaging) Fitting Remove the white liner (Velcro® top edge) and remove the bag from the packaging The product packaging is designed to be used as a drilling guide Line up the guide on the rear fender and drill 4 x 6mm diameter holes Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam) Tighten anti-clockwise and always use thread lock Allow 24 hours to dry Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage