High-quality, practical mounting kit for securely attaching most GIVI Monokey top cases to the ALTRIDER luggage racks (available separately, see below).
The mounts and hardware included in the kit attach to the luggage racks through the pre-drilled GIVI mounting points already measured to the GIVI Top Case specifications on the rack. The hardware and mounts are very slim and unobtrusive when the top case is not attached to the rack so the kit does not interfere with any strapped-down gear.
Specifications
ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA
Fits almost any GIVI Monokey compatible top cases
Note: NOT compatible with Outback Trekker cases!
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality luggage rack by ALTRIDER, fitting the below-mentioned Honda models.
This robust and durable rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OBERLAND FUEL mounts in order to carry fuel and water packs.
Specifications
100% designed and made in the USA
Fitting Honda CRF 300 L / Rally
Laser-cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX and OVERLAND FUEL mounts
Textured powder-coated black 10 gauge steel brackets securely mount the rack to the sub-frame at four points
Quick and easy installation with the included stainless steel hardware
Available in black and silver - please select from above
High-quality luggage rack system by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC.
This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware.
The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides.
The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box (requires the Givi Top Case mounting kit).
Compatible with the R 1200/R 1250 GSW Adventure with the rear luggage rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks).
An alternative configuration allows the simultaneous mounting of the pillion rack, factory plastic rack with grab handles, and rear rack in upper position bolted to the factory rack (see image above).
The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack.
Note: The pillion rack is not compatible with the original BMW Vario side cases!
Specifications
100% designed and manufactured in the USA
Laser cut from 3/16 in (4.76 mm) aluminum
Dimensions: length = 27.9 inch (70.8 cm) x width = 16 inch (40.6 cm)
Weight: 6 lbs (2.8 kg)
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases
Solid top surface on pillion rack helps prevent water intrusion
Available in anodized black and silver - please select from above
High-quality, practical luggage rack system by ALTRIDER, suitable for he Honda CRF1000L Africa Twin.
This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system.
The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides.
The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box.
The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack.
Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. Both racks are compatible with factory side cases and are available in both a clear anodized silver and black anodized finish.
Specifications
Laser cut from 3/16 in (4.76 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases
Solid top surface on pillion rack helps prevent water intrusion
Available in black and silver - please select from above
Suitable for:
Honda CRF1000L Africa Twin standard models from MY 2018 - 2019 (not suitable for Adventure-Sports-models)
High-quality pillion luggage rack by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC.
This ALTRIDER pillion luggage rack is the only offering on the market to replace the rear seat and combine with the ALTRIDER Rear Luggage Rack (available separately) for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack.
For the ultimate carrying capacity, combine the pillion rack with ALTRIDER's Luggage Rack System (available separately).
The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish.
Also compatible with the R 1200/R 1250 GSW Adventure (requires removal of OEM steel top box rack - compatible with steel pannier racks).
Note: This rack is not compatible with the original BMW Vario side cases!
Specifications
100% designed and manufactured in the USA
Laser cut from 3/16 in (4.76 mm) aluminum
Part of ALTRIDER's Luggage Rack System for the BMW R 1200/R 1250 GS + GSA LC (Rear luggage rack available separately - see below)
Dimensions: Length = 14.4 inch (36.6 cm) x Width = 12.4 inch (31.5 cm)
Weight: 3 lbs (1.4 kg)
Mounts using pillion seat keyed latch – no hardware or tools required
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Solid top surface helps prevent water intrusion
Available in anodized black and silver - please select from aboveManufacturer:AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality pillion luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin.
This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack.
The pillion luggage rack is compatible with factory side cases and the factory rear top box, and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system.
The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish.
Specifications
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Solid top surface helps prevent water intrusion
Available in black and silver - please select from above
Suitable for:
Honda CRF1000L Africa Twin Standard MY 2018 and up
Honda CRF1000L Africa Twin ADV Sports MY 2017 and up
High-quality pillion luggage rack by ALTRIDER, suitable for the below-mentioned Honda models.
This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack.
The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system.
The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish.
Specifications
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Solid top surface helps prevent water intrusion
Available in black
Suitable for:
Honda CRF1100L Africa Twin Standard from MY 2020
Honda CRF1100L Africa Twin Adventure Sports from MY 2020
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality pillion luggage rack by ALTRIDER, suitable for the Yamaha Tenere 700 (2019+).
This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack.
The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system.
The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish.
Specifications
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Solid top surface helps prevent water intrusion
Available in black and silver - please select from above
Suitable for:
Yamaha Tenere 700 from MY 2019
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models.
This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system.
The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides.
The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box.
The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack.
Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system.
Specifications
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Solid top surface helps prevent water intrusion
Available in black and silver - please select from above
Suitable for:
Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!)
Honda CRF1100L Africa Twin Adventure Sports from MY 2020
High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models.
This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system.
The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides.
The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box.
The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack.
Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system.
Specifications
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Solid top surface helps prevent water intrusion
Available in black and silver - please select from above
Suitable for:
Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!)
Honda CRF1100L Africa Twin Adventure Sports from MY 2020
High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for BMW F 750 / 850 GS models.
The ALTRIDER luggage rack for the above-mentioned BMW models is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX or OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box. Installation is quick and easy with the included stainless steel hardware.
Specifications
All ALTRIDER products are 100% designed and manufactured in the USA
Laser cut from 3/16 inch (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX and OVERLAND FUEL mounts (available separately) and GIVI Monokey top cases
Delivery includes the necessary mounting material
Suitable for BMW F 750 / 850 GS
Available in black anodized
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
This unique ALTRIDER luggage rack for the KTM Adventure-models can be mounted in multiple positions to suit most luggage needs. Bolt it directly to the factory rack to create a larger, more versatile platform for any gear. The rack can also replace the OEM rack, bringing the load and center of gravity closer to the ground. Finally, the luggage rack can be mounted without the factory rack or passenger grab handles – allowing to combine it with the ALTRIDER pillion rack to create a flat, continuous luggage surface.
All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL -fuel packs. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. Hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing strength. Learn more about how ALTRIDER luggage racks are developed in our blog post Hooked: How We Developed Our Luggage Racks.
Specifications
ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA
Luggage rack can be mounted in multiple configurations
Strategically placed cutouts provide ample mounting points without sacrificing strength
Completely smooth luggage surface
3/16” (4.8 mm) laser-cut anodized aluminum
Interfaces with ROTOPAX and OVERLAND FUEL fuel packs
Available in silver or black
Suitable for:
Husqvarna
Norden 901
KTM
790 Adventure/R
890 Adventure L/R
1050 Adventure
1090 Adventure/R
1190 Adventure/R
1290 Super Adventure R-S-T
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality luggage rack by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC.
This ALTRIDER luggage rack has been constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. Installation is quick and easy with the included stainless steel hardware.
The luggage rack is pre-drilled for easy integration with ROTOPAX or OVERLAND-FUEL mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokeyhard mount points, allowing for use with any Monokey-compatible top box.
Compatible with the R 1200/R 1250 GSW Adventure with the rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks).
Note: This rack is only compatible with the original BMW Vario side cases when mounted in the upper position!Specifications
100% designed and manufactured in the USA
Laser cut from 3/16 in (4.76 mm) aluminum
Part of the ALTRIDER Luggage System for the R 1200/R 1250 GS LC (Pillion Rack available separately - see below)
Dimensions: length = 13.5 inch (34.3 cm) x width = 16 inch (40.6 cm)
Weight: 3 lbs (1.4 kg)
Mounts in upper or lower position, without additional brackets or removing the pillion seat
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX or OVERLAND FUEL mounts and GIVI Monokey top cases
Available in anodized black and silver - please select from above
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin.
This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish.
Specifications
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX and OVERLAND FUEL mounts and GIVI Monokey top cases
Available in silver
Suitable for:
Honda CRF1000L Africa Twin standard models from MY 2016 (does not fit any Adventure Sports models!)
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin Adventure Sports model.
This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish.
Specifications
Laser-cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX and OVERLAND FUEL mounts and GIVI Monokey top cases
Available in black and silver - please select from above
Suitable for:
Honda CRF1100L Africa Twin ADV Sports from MY 2020 (also fitting the standard model with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!)
High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for the Yamaha XT1200Z Super Tenere.
The ALTRIDER luggage rack for the Super Tenere is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. The rack comes with a mounting bracket, made from 3/16 inch (4.75 mm) anodized aluminum, which replaces the stock plastic mounting bracket and greatly increases the rack’s capacity.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. The rack may be installed in two different positions, i. e. either in the customary high position on top of the passenger seat and handles, or in a lower position without these two items.
ALTRIDER’s luggage rack for the Super Tenere is compatible with the factory side cases, and is available in a clear anodized silver finish and black anodized finish.
Note: This rack is not compatible with the original YAMAHA top case!
Specifications
All ALTRIDER products are 100% designed and manufactured in the USA
Laser cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX mounts (available separately) and GIVI Monokey top cases
Dimensions: 3 inches (7.6 cm) x 14 inches (35.6 cm) x 14 inches (35.6 cm) (H x W x D)
Weight: 3 lbs (1.4 kg)
Suitable for Yamaha XT1200Z Super Tenere from MY 2010
Available in black and silver - please select from above
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality luggage rack by ALTRIDER, custom-made for the Yamaha Tenere 700 model.
This unique rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and powder coated for a durable finish that looks great. The unique coined cutouts are specially shaped to safely accommodate a wide variety of straps and hooks, allowing to carry almost any piece of luggage or item securely. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps.
All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL fuel packs (available separately). The hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing any strength.
Specifications
ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA
Made of 3/16” (4.8 mm) laser-cut anodized aluminum
Completely smooth luggage surface
Including two 3.2mm thick steel fittings ensuring a secure four-point mounting on the rear frame
Interfaces with ROTOPAX or OVERLAND FUEL fuel packs
Delivery includes the necessary installation hardware
Available in silver or black - please select from above
NOTE: Delivery does NOT include the pillion rack shown above, it is available separately!
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin standard model.
This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish.
Specifications
Laser-cut from 3/16 in (4.75 mm) aluminum
Specially shaped cutouts accommodate a wide variety of hooks and straps
All cutouts and edges have a rounded profile
Compatible with ROTOPAX and OVERLAND FUEL mounts and GIVI Monokey top cases
Available in black and silver - please select from above
Suitable for:
Honda CRF1100L Africa Twin Standard from MY 2020
Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality GLOBESCOUT luggage rack for mounting the XPAN+ Top Cases, specifically constructed for the below-mentioned Honda models.
Specifications
Made of a sturdy aluminium-magnesium mixed alloy
Colour: Natural anodized
Fits with the GLOBESCOUT Series I + II Top Cases
Suitable for:
Honda CRF1000L Africa Twin standard models from MY 2016
GLOBESCOUT luggage rack for mounting the XPAN+ Top Cases, specifically constructed for the below-mentioned Triumph model.
Specifications
Made of a sturdy aluminium-magnesium mixed alloy
Colour: Natural anodized
Fits with the GLOBESCOUT Series I + II Top Cases
Suitable for:
Triumph Tiger 800 XC
High-quality GLOBESCOUT luggage rack for mounting the XPAN+ top cases, specifically constructed for the below-mentioned Yamaha model.
Specifications
Made of a sturdy aluminium-magnesium mixed alloy
Colour: Natural anodized
Exclusively fitting the GLOBESCOUT Series II Top Cases !!!
Suitable for:
Yamaha XT1200Z Tenere
€56.42*
€115.00*(50.94% saved)
This website uses cookies to ensure the best experience possible. More information...