Accessories

High-quality side stand foot enlarger by ALTRIDER, offering substantially more safety and comfort on off-road terrain. Custom-made for the BMW F 750 / 850 GS models. Made from 1/8 inch (3.18 mm) stainless steel, this article features a 3D tread to create better traction for the boots and to allow an easy pulling down of the side stand while still on the bike. Even after months of use, the ALTRIDER side stand foot will remain tight because it clamps down on the actual foot of the side stand with Torx fasteners. Specifications 100% designed and manufactured in the USA Offering excellent resistance against corrosion and weather Two-piece design for a perfect fit Minimal weight to avoid accidental deployment during riding Torx fasteners (requires T-25 Torx driver) Delivery includes the necessary mounting material Available in powder-coated black NOTE: The BMW F850 ADV and some standard models are being shipped with different side stands. In this case, the ALTRIDER side stand enlarger will only fit one of these side stands. Therefore, please view the comparison image above in order to determine if this part is suitable for the side stand in question. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality voltage regulator guard by ALTRIDER, suitable for the below-mentioned Honda models. When venturing off the beaten paths, it is important to keep any bike’s vitals protected from stray branches, flying rocks or anything else. That includes the voltage regulator, an integral component responsible for maintaining the battery charge and keeping the bike’s electrical system up and running. ALTRIDER’s voltage regulator guard for the Honda Africa Twin is an upgrade from the stock guard that leaves the voltage regulator completely exposed to debris from the rear tire and chain. The guard offers comprehensive protection in the form of a sturdy 1/8 inch (3.2 mm) thick piece of laser-cut aluminum. It easily mounts to the OEM mounting points with the included stainless steel hardware. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 1/8" (3,2mm) anodized aluminum for robust yet lightweight protection Mounts to OEM mounting points with included stainless steel hardware Available in silver or black - please select from above Suitable for: Honda CRF 1000 L Africa Twin Standard                 from MY 2016 Honda CRF 1000 L Africa Twin Adventure Sports   from MY 2018 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality footrest extensions by GLOBESCOUT, replacing the original pegs of the below-mentioned KTM and Husqvarna models. Specifications Delivery in pairs Including all necessary mounting hardware Available in blue anodized aluminiumStainless steel set screws Fits KTM SX/EXC all and Husqvarna TE/TC from MY 2014 Manufacturer YILDIZ BRONZ Ltd.Davutpaşa C. 22/5234010 Topkapı / Istanbul, TürkiyeHomepageDistributionoffroad-kontor

High-quality, 100% waterproof bolt-on fender pack by KRIEGA. Ideal for carrying safety equipment, small tools, dry gloves etc. on a motorcycle. Specifications  Material: 1000D Dupont® Cordura® Ultra-tough, abrasion-resistant RHINOTEK fabric on base with 4 x heavy-duty rivets DRYPACK = taped-seam liner, fixed with Velcro®  100% waterproof Size: 200 mm x 175 mm x 70 mm (L x W x H) Volume: 2.5 litres Velcro® closure strap 10-year guarantee Delivery includes: 4 x CNC 6061-T6 alloy fasteners with nylon spacer washers 4 x stainless steel fasteners 1 drilling guide (product packaging) Fitting  Remove the white liner (Velcro® top edge) and remove the bag from the packaging The product packaging is designed to be used as a drilling guide  Line up the guide on the rear fender and drill 4 x 6mm diameter holes Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam) Tighten anti-clockwise and always use thread lock Allow 24 hours to dry Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701.This is simply a portion of the Scott's submount kit. You just purchase the riser system without the additional parts necessary for mountings a Scott's Damper. You can also add the frame bracket/tower/pin at a later time for use with the Scott's should you want to. (No damper included!)Fitment: Fits All Husqvarna 701 Enduro & SMC models 2016-2026 yearsFeatures:All Riser Kits include our AMPS pattern top clamp!Relaxed Ergonomics from increased bar height (30mm)Immediate confidence boost with more race inspired control/feelingTwo bar offsets (fwd/rwd) are achievable by flipping risers 180*Narrow submount allows clearance for fork tubes allowing you to slide the forks up if front end lowering is desiredSolid Aluminum Cone Inserts12mm Alloy BoltsBillet Machined Submount, Risers, Top Clamp all anodized in black colorWorks with 1-1/8" diameter bars onlyThe factory bar setup with rubber cones, 10mm bolts, and thin aluminum components leaves much to be desired.The factory rubber cones are replaced with aluminum inserts in favor of a rigid bar setup and replace the mounting bolts with larger 12mm alloy socket head cap screws. Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality engine guard in proven VANASCHE-MOTORSPORTS quality (by Molecule), suitable for the models listed below. This robust and extremely wear-resistant engine guard is made from 9.5 mm thick, thermoformed UHMW plastic and offers a perfect fit with ample ground clearance, ten times the wear resistance of carbon steel, and excellent sound-dampening properties. Stones and debris bounce off with a muffled sound, not a deafening bang. Unlike welded HDPE plates, our precise thermoforming process creates a one-piece construction that is more robust, lighter, and more durable. This skid plate is designed for aggressive riding and will last you a long time! The self-lubricating properties of UHMW also ensure an extra-low coefficient of friction. Weight including mounting hardware: only 2.5 kg! Features:Made from 9.5 mm thick, thermoformed UHMW (ultra-high molecular weight polyethylene) Reliable protection for the front and underside of the engine against debris and other ingress while riding Additional catalytic converter protection (optional) Reinforced, TIG-welded stainless steel front bracket for extremely secure mounting Maintains stock ground clearance – no loss of performance Directly fitting rear bracketAvailable in black Fits: KTM 390 Adventure R 2025+KTM 390 Enduro R       2025+ Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor