Yamaha Tenere 700

High-quality, adjustable side stand by ALTRIDER, custom-made for Yamaha Tenere 700 models MY 2019-2024.  The ALTRIDER Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black  Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original YAMAHA cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable windscreen risers by ALTRIDER, custom-made for the Yamaha Tenere 700  MY 2019-2024 (see below). The Yamaha Tenere 700 is a great all around bike for both on- and off-road riding. However, most riders find that the windscreen is just not tall enough, and are hit with wind buffeting, bugs to the visor and excess noise. To alleviate these issues, ALTRIDER designed an adjustable windscreen riser for the Yamaha Tenere 700, with a minimum 10mm rise over stock at the lowest setting and a 90mm adjustment range, for a total 100mm increase at the highest setting over the stock windscreen. Given the ultimate range of adjustment, the ALTRIDER Windscreen Riser can eliminate buffeting for a wide range of riders' heights. Specifications Designed and manufactured in the USA CNC-machined from 6061 T6 aircraft-grade aluminum Variably adjustable with a minimum height increase of 10 mm and a maximum increase of 100 mm Easy to install within minutes using the included hardware Adjustable on the fly with CNC-machined knurled thumb nuts - no tools required Laser-etched ALTRIDER "A" and "T7" logos  Compatible with the ALTRIDER T7 Cowl Support (available separately, see below) as well as any GPS mounts and handlebar risers Anodized black finish Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024NOTE: Delivery does NOT include any windscreens! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, oversized billet foot pegs by the US manufacturer ALTRIDER, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. For further information, please see below. Specifications Precision-made of heavy duty, high-quality 6061-T6 billet aluminum Tread area size: 2,28" x 4,8" (58 mm x 122 mm) - depth x width Surface equipped with several screwed pins for a maximum grip and braking sensation Specifically designed to prevent most dirt and mud from clinging to the pegs Delivery includes 2 uprated springs and all the necessary mounting material Available in black anodised Suitable for: Husqvarna Husqvarna Norden 901 (2022+) Husqvarna 701 (2016+) KTM KTM 690 Enduro R (2008+) KTM 790 ADV S / R (2019-2020) KTM 890 ADV R (2021+) KTM 950 Adventure (2003-2006) KTM 990 Adventure (2006-2012) KTM 1090 Adventure R / S KTM 1290 S Adventure S KTM 1290 Super Adventure R / S / T KTM 125 EXC / SX (1998-2016) KTM 150 SX / XC (2010-2016) KTM 200 EXC / XC-W (2006-2016) KTM 250 EXC / SX / XC / XCF-W (2006-2016) KTM 300 EXC / XC (2006-2016) KTM 350  EXC-F / SX-F / XCF-W (2012-2016) KTM 400 EXC (2009-2011) KTM 450 EXC / SX-F / XC-W (2009-2016) KTM 500 EXC / XC-W (2012-2016) KTM 530 EXC / XC-W (2009-2011) KTM 990 Supermoto R / T (2013) KTM Freeride 250 F / R (2015-2016) KTM Freeride 350 (2012-2016) KTM Freeride E-XC (2015-2016) Yamaha Yamaha Tenere 700      (2019+)  Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications  100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clear headlight guard by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. Constructed in the United States from 3/16 inch (4.7 mm) thick scratch-resistant polycarbonate, the ALTRIDER headlight guard is made of extremely strong, impact-resistant polycarbonate - the same material as bullet-proof windows. This material is formulated with a hardened scratch-resistant surface, both front and rear. The dual lenses are secured with two 1/16 inch (2 mm) laser-cut textured powder coat steel brackets that are extremely resistant to rust and weathering.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets, using custom-machined aluminum ball studs and rubber sockets to mount the lens to the frame. The no-tools quick-release system allows for easy removal of the face for cleaning. NOTE: Polycarbonate will react to certain chemicals and requires specific care to be cleaned correctly and kept looking good for the long haul. Improper cleaning can result in scratches, hazing surface and cracking. Specifications 100% designed and manufactured in the USA Polycarbonate lens protects headlight without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Yamaha Tenere 700 models MY 2019-2024 as mentioned below. While the OEM Yamaha clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a rider's hand and forearm. The ALTRIDER extension helps reducing the rider's fatigue, at the same time increasing the clutch feel. Fully compatible with the OEM Yamaha crash bars! Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized grey Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Does NOT fit World-Raid-models!Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Stylishly designed cowl support bracket by ALTRIDER, suitable for the below-mentioned Yamaha models. All in all, the Yamaha Tenere 700 is an excellent model. However, the OEM headlight and cluster assemblies are mounted inadequately regarding any tough off-road riding, which can result in unwanted and excessive shaking and wobbling or even in a strobe light effect from the headlight on larger bumps. This typically occurs when riding down a dirt or gravel road, over a rail crossing or any other similar bumps. To assist in reducing or eliminating this unwanted shaking and to help brace the OEM headlight and cluster assembly, ALTRIDER has designed the cowl support bracket for the Tenere 700. This practical item serves to stabilize the OEM instrument panel and any accessories mounted to the cross bar, including tablets and GPS. The ALTRIDER cowl support functions as a strong link between the rear of the TFT display and the windshield brace bar, which can also be used as a GPS mount bar. Its design imparts stability by tying these items into a triangle. The instrument cluster as well as the windscreen and headlight mount points are unified by the specially formed cowl support. Specifications Made in the USA Formed from 14 gauge (0.6 "/1.6 mm thick) steel Mounts to OEM locations with both included hardware and OEM hardware Reduces movement and/or shaking of the instrument cluster and headlight wobble Available in powder-coated black and brushed silver - please select from above Suitable for:Yamaha Tenere 700 Standard     2019-2023Yamaha Tenere 700 Rally            2020-2023Yamaha Tenere 700 World Raid  2022-2023 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position, regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USA Suitable for the Yamaha Tenere 700 (all years) Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 25,4 mm (1 inch) riser height available Pins provided with enlarger for enhanced grip, extras included Kit available in black or silver (please select from above) Patent Pending Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality mesh headlight guard by ALTRIDER, suitable for the mentioned below Yamaha Tenere 700 models. Constructed of 1/16 inch (2 mm) laser-cut steel, this headlight guard provides total coverage for the headlight assembly without interfering with the light output. Its meticulously designed mesh pattern minimizes the loss of illumination while actually blocking any damaging debris.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets using custom-machined aluminum ball studs and rubber sockets to mount the lens to the brackets. The no-tools quick release system allows for an easy removal of the face for cleaning and the textured powder coat finish is extremely resistant to rust or weathering. Specifications 100% designed and manufactured in the USA Mesh face deflecting debris without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated  Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality pillion luggage rack by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Fits:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024

High-quality radiator guard by ALTRIDER, custom-made for the Yamaha Tenere 700 models as mentioned below. A fully functioning cooling system is vital for keeping the bike running smooth, but the radiator can be exposed and susceptible to damage from rocks and road debris. This practical radiator guard is designed with louvers to offer maximum protection of the radiator while maintaining optimal airflow to help keep the motor cool. The louvers also provide additional rigidity to the entire piece. Specifications 100% designed and manufactured in the USA Laser-cut 14 gauge (1.63 mm thick) aluminum protects the radiator from dangerous debris Louvered design provides maximum coverage without restricting airflow Easy to install with the mounts using stock OEM hardware - no additional hardware required Replaces the entire OEM radiator shroud assembly Available in an anodized silver or black finish - please select from above Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, custom-made for the Yamaha Tenere 700 models mentioned below.. This unique rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and powder coated for a durable finish that looks great. The unique coined cutouts are specially shaped to safely accommodate a wide variety of straps and hooks, allowing to carry almost any piece of luggage or item securely. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL fuel packs (available separately). The hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing any strength.  Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 3/16” (4.8 mm) laser-cut anodized aluminum Completely smooth luggage surface Including two 3.2mm thick steel fittings ensuring a secure four-point mounting on the rear frame Interfaces with ROTOPAX or OVERLAND FUEL fuel packs Delivery includes the necessary installation hardware Available in silver or black - please select from above NOTE: Delivery does NOT include the pillion rack shown above, it is available separately!Fits:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Stylishly designed side stand foot extension by ALTRIDER, suitable for the below-mentioned Yamaha models. This side stand extension offers a large contact surface to improve the motorcycle’s parking footprint on rough surfaces and soft grounds.  Specifications Made from 1/8 inch (3.18 mm) laser-cut stainless steel Perfect fit 3D design for easy grab Minimal weight to avoid accidental deployment during riding Compatible with the center stand equipped Available in powder-coated black or brushed silver - please select from above Suitable for:  Yamaha Tenere 700 from MY 2019 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality skid plate by ALTRIDER, specifically designed for the Yamaha XT 700 Z Ténéré, MY 2019 and 2020 (Euro 4). This tough 4mm aluminium sheet protects the powerful Crossplane two-cylinder of the above-mentioned model with the oil filter in the front and the header pipes as well as its vulnerable side stand switch from any damage caused by flying rocks and debris when off-roading. Delivery also includes a linkage guard made of 6mm thick HDPE plastic. This strong and durable piece mounts to four points on the above-mentioned skid plate, using all stainless steel hardware. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 4 mm thick, TIG hand welded aluminium Offering reliable underbody protection against stone chipping and collisions Available in a smooth silver or textured black powder coat finish - please select from above Delivery includes all stainless steel mounting material and instructions Compatible with the OEM Yamaha center stand Not compatible with TOURATECH crash bars! Fits: Yamaha Ténéré 700 - MY 2019-2020 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality GPS mount by the US manufacturer ALTRIDER, universally sized for the mounting on bars and tubes with a diameter of 12 mm, 14 mm, 16 mm and 22 mm. Delivery includes an AMPS pattern for BOTH orientations, i. e. portrait and landscape. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Includes an AMPS bolt pattern to securely mount any GPS units 4-hole pattern for vertical use, 2-hole pattern for horizontal use Compatible with RAM mounts (ball adapters, sizes A, B and C) and Garmin Zumo cradles Delivery includes the necessary stainless steel hardware Compatible with the ALTRIDER Yamaha Tenere 700 Cowl Support Bracket (available separately, see below) Available in anodised matte black  Note: Mounting from the rear of the adapter plate is not possible, so this product is not compatible with TomTom mounts without any modifications. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

BARKBUSTERS bar end mounting kit, fitting Yamaha handlebars with an internal thread. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Updated version! High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the Yamaha XTZ 700 Tenere model MY 2019-2024. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (all available separately, see below) Installation tip - XTZ700 Tenere from MY 2019-2024 If heated grips are installed, it may be required to fix 3mm of washers between the bar-end weights and the spacers in order to ensure the necessary clearance between the weights and the grips. Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for the Yamaha XTZ 700 Tenere World Raid model MY 2022-2024. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (all available separately see below) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor