BMW R 1250 GS LC

High-quality ABS sensor guard by ALTRIDER, custom-made for the below-mentioned, liquid-cooled BMW R 1200/1250 GS models. The BMW water boxer is a machine that lets riders take on expeditions across several continents and in every condition. The ABS sensor is a critical and expensive component that detects wheel speed, calculates traction control, and performs other dynamic functions for smooth operation. The ALTRIDER ABS sensor guard protects this vulnerable unit to ensure riders are able to get the most out of their increasingly sophisticated BMWs. ALTRIDER’s ABS sensor guard installs quickly and easily. The design hugs the mount point and is the only design with an anti-rotation tab. Machined from 1/16 inch (1.5 mm) thick laser-cut stainless steel, the guard is a slick addition to the front wheel hub while providing much needed protection. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for BMW R 1200 and 1250 GS LC / Adventure, R, RS and RT 1/16 inch (1.5 mm) thick stainless steel construction Laser cut, grain finished, formed All hardware included Simple 5-minute installation Protects the ABS sensor from debris Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned BMW models.The BMW R1200 and R1250 GS/GSA models are known for their large tilt angels, which cause the OEM side stands to easily sink into soft earth, gravel, or other uneven surfaces.The extremely robust ALTRIDER side stand featuring an infinite height adjustment and an enlarged foot plate reliably helps avoiding this unpleasant situation. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USAMade of tough steel and aluminium Infinite adjustable height setting, allowing heights of up to 1.7 inch (about 4.5 cm) higher than factory, or 0.25 inches (about 0.6 cm) lower than factory Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded springWorks with the original side stand sensor Available in black Fits: BMW R1200 GS/GSA from MY 2013BMW R1250 GS/GSA from MY 2013 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

The resilient face of this high-quality headlight guard by ALTRIDER for the BMW R 1200/R 1250 GS and GSA LC is precision-cut from impact-resistant polycarbonate – the same material as used in bullet-proof windows. This polycarbonate is formulated with a hardened, scratch-resistant surface on both front and rear. The face attaches to the stainless steel frame with a custom-machined, sturdy aluminum ball-and-rubber socket connection which is free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The polycarbonate guard is also interchangeable with all other versions of the ALTRIDER headlight guard. The stainless steel frame of the polycarbonate headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. Unlike other available headlight guards, installation is simple and does not require removal of the blinker stalks or any bodywork. The top is mounted using OEM bolts, while the bottom uses the provided stainless steel hardware. The metal frame is laser-cut and grain finished. The frame is available in a powdercoat black finish which is incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights. The ALTRIDER polycarbonate headlight guard also includes a specially designed glare guard. This durable vinyl decal attaches to the wind deflector below the windshield. The refined matte finish prevents light from reflecting off the windshield into the rider's eyes. Please note – While polycarbonate is an incredibly tough material, chemical-based cleaners will rapidly break down the material (ex. alcohol, Windex, etc). Only warm water and mild soap should be used to clean the polycarbonate headlight guard. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Polycarbonate face resistant to impacts and specially treated to harden the surface to resist scratches Custom-machined ball-and-socket connections allow removal of face without any tools Polycarbonate headlight guard interchangeable with all other versions of the ALTRIDER headlight guard Stainless steel frame provides strong foundation and is highly resistant to rust and weathering Compatible with halogen and LED headlights Frame available in powder-coated black finish Compatible with BMW R 1200/R 1250 GSW and GSW Adventure Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. As every rider is different, there are two riser heights available depending on the riding style. For those needing additional customization, risers can also be swapped out. Enlarger The ever-changing terrain of off-road riding means the entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the rider's foot a greater surface area to work with, affording them more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25,4 mm (1") riser height Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Suitable for BMW R 1200 GS and 1250 GS Water Cooled Fitment on Adventure model requires installation of standard brake pedal, BMW part# 35-0380 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality Front Engine Guard by ALTRIDER, specifically designed for the below-mentioned BMW models. Made of 1/16 inch (1.9 mm) brushed stainless steel, the Front Engine Guard easily mounts with a ball stud and rubber grommet system. A closer fit and larger surface area than other brands means maximum protection as well as a better clearance of the fender. Aluminum ball studs with stainless steel threads replace the OEM hardware, and rubber grommets on the guard itself allow an easy removal of the guard for cleaning after a muddy ride. Specifications 100% designed and manufactured in the USA Made of 1/16 inch (1.9 mm) brushed stainless steel Offering reliable underbody protection against stone chipping and collisions Close fit for a better fender clearance Easy removal with a ball stud and grommet system Easy installation - delivery includes all the necessary mounting material Available in black or silver - please select from above Compatible with the ALTRIDER Skid Plate (available separately, see below) Suitable for: BMW R 1250 GS BMW R 1250 GS Adventure BMW R 1250 GS Adventure HP BMW R 1250 GS Adventure Exclusive Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack system by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box (requires the Givi Top Case mounting kit). Compatible with the R 1200/R 1250 GSW Adventure with the rear luggage rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). An alternative configuration allows the simultaneous mounting of the pillion rack, factory plastic rack with grab handles, and rear rack in upper position bolted to the factory rack (see image above). The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Note: The pillion rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Dimensions: length = 27.9 inch (70.8 cm) x width = 16 inch (40.6 cm) Weight: 6 lbs (2.8 kg) Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in anodized black and silver - please select from above

High-quality pillion luggage rack by ALTRIDER, suitable for the  BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER pillion luggage rack is the only offering on the market to replace the rear seat and combine with the ALTRIDER Rear Luggage Rack (available separately) for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. For the ultimate carrying capacity, combine the pillion rack with ALTRIDER's Luggage Rack System (available separately). The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Also compatible with the R 1200/R 1250 GSW Adventure (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of ALTRIDER's Luggage Rack System for the BMW R 1200/R 1250 GS + GSA LC (Rear luggage rack available separately - see below) Dimensions: Length = 14.4 inch (36.6 cm) x Width = 12.4 inch (31.5 cm) Weight: 3 lbs (1.4 kg) Mounts using pillion seat keyed latch – no hardware or tools required Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in anodized black and silver  - please select from aboveManufacturer:AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality rear brake master cylinder guard by ALTRIDER, suitable for the BMW R 1200/R 1250 GS and Adventure LC. The a. m. BMW models check in at over 500 pounds without a rider - requiring every bit of braking power to stop in a hurry. This custom-made rear brake reservoir guard by ALTRIDER provides reliable safety for the rear brakes. Constructed from lightweight aluminum, the the guard keeps errant rocks and debris from taking out the rider's ability stop. The deliberate design of the guard locks the cover in place, preventing contamination of the delicate braking system.  Available in anodized silver or black. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Anodized aluminum provides robust yet lightweight protection Compatible with R 1200/R 1250 GSW + GSW Adventure Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER luggage rack has been constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. Installation is quick and easy with the included stainless steel hardware. The luggage rack is pre-drilled for easy integration with ROTOPAX or OVERLAND-FUEL mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokeyhard mount points, allowing for use with any Monokey-compatible top box. Compatible with the R 1200/R 1250 GSW Adventure with the rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is only compatible with the original BMW Vario side cases when mounted in the upper position!Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of the ALTRIDER Luggage System for the R 1200/R 1250 GS LC (Pillion Rack available separately - see below) Dimensions: length = 13.5 inch (34.3 cm) x width = 16 inch (40.6 cm) Weight: 3 lbs (1.4 kg)  Mounts in upper or lower position, without additional brackets or removing the pillion seat Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX or OVERLAND FUEL mounts and GIVI Monokey top cases Available in anodized black and silver  - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality side stand foot enlarger by ALTRIDER, offering substantially more safety and comfort on off-road terrain. Custom-made for BMW R 1200 and 1250 GS GSA models. Made from 1/8 inch (3.18 mm) stainless steel, this article features a 3D tread to create better traction for the boots and to allow an easy pulling down of the side stand while still on the bike. Even after months of use, the ALTRIDER side stand foot will remain tight because it clamps down on the actual foot of the side stand with Torx fasteners. Specifications 100% designed and manufactured in the USA Offering excellent resistance against corrosion and weather Two-piece design for a perfect fit Minimal weight to avoid accidental deployment during riding Torx fasteners (requires T-25 Torx driver) Delivery includes the necessary mounting material Available in powder-coated black Fits: BMW R1200 GS                     from MY 2015 BMW R1200 GSA                   from MY 2014 BMW R1250 GS und GSA      from MY 2019 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality riser plate for the side stand enlarger by ALTRIDER (available separately), fitting the below-mentioned BMW models. While the above-mentioned side stand enlarger will help the bike keep a firm footing on loose or softer surfaces, the riser plate can be installed to prop the bike into a slightly more upright position. It can change the BMW's lean angle by as much as 5°, which improves the saftey of mounting and dismounting, making all the difference at the end of a long day of riding. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made from 0.25 inch (6.4 mm) thick stainless steel Laser-cut design for a perfect fit Extremely tough and resistant to rust and weather influences Available in powder-coated black Fits: BMW R 1200 GS                    MY 2013 and from MY 2015 BMW R1200 GSA                   from MY 2014 BMW R1250 GS und GSA      from MY 2019 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality skid plate by ALTRIDER, specifically designed for the below-mentioned BMW models. Made of sturdy aluminum, the ALTRIDER skid plate features a corrugated design that multiplies its strength. It is a one-piece unit that provides tire to tire protection.The unique shape tightly conforms to the underside of the bike, offering reliable protection for the highly sensitive headers and cross pipe.  The ALTRIDER skid plate is the only design on the market that does not rely on the engine as a mounting point, meaning that it is held in place with two custom-machined fasteners that replace the OEM center stand pins, at the same time maintaining full use of the center stand. Specifications 100% designed and manufactured in the USA Made of 3/16 inch (4.75 mm) hand TIG welded aluminum Offering reliable underbody protection against stone chipping and collisions Oil change does not require removal of skid plate! Compatible with the Akrapovic Full Exhaust System Shotgun Style  Note: Currently not compatible with the Remus and Two-Brothers headers! Easy installation - delivery includes all the necessary mounting material Available in black or silver Suitable for: BMW R 1250 GS BMW R 1250 GS Adventure BMW R 1250 GS Adventure HP BMW R 1250 GS Adventure Exclusive <iframe width="560" height="315" src="https://www.youtube.com/embed/yUWy2fuHu5s" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned BMW models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installationAvailable in silver and black (NEW) - please select from above Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Suitable for:  BMW F750GS        from MY 2018 BMW F850GS        from MY 2018 BMW F850GSA      from MY 2018 BMW R1250GS      from MY 2018 BMW R1250GSA    from MY 2019 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit all BMW GS models with a rear rack. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the four heavy-duty OS-Rings included in the delivery, which are simply exchanged for the original mountings. The four Subframe Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).   Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). SpecificationsSpecifically designed and manufactured for all BMW GS modelsHeavy-duty Hypalon™ construction with a semi-rigid polypropylene coreVery stable and lightweightCarrying capacity from 12 to 54 litres with centre pack mounting optionWeight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit)Quick and easy to put on/take off Reinforced stitching on all stress pointsAircraft grade alloy hooksNon-slip cam bucklesDelivery includes 4 OS-Rings, 4 Subframe Loops and 2 EVA pads for an additional abrasion protectionAvailable in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMEREven though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle.Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, practical fit kit by KRIEGA, specifically designed for fixing KRIEGA US-Drypacks or OS-Adventure Packs to BMW Adventure bikes. Allows easy fitting of any size/combination of KRIEGA US-Drypacks (5-90 litres, available separately - see below). With some technical skills, it is also possible to mount this fit kit to other bikes than the Ducati Scrambler. Delivery includes: 4 Hypalon & bolt-on webbing loops, 2x50 and 2x 65 mm - 6mm hole each 8 x M6 washers, 4 M6x30 screws and 4x M6 nyloc bolts Plug and Play: Designed to fit exclusively BMW R1250GS, F750GS, F850GS! 10-year guarantee - learn more Install as follows: Loosen the 4 luggage rack screws and replace them by the 4 long M6 screws included in the delivery, then tighten them to 5 Nm Slide an M6 washer into each Hypalon end of the screw-on loops The two 50 mm screw-on loops are mounted on the rear underside of the luggage rack. Attach the loops to the additional thread of the M6 ​​screws with another washer and a Nyloc nut Repeat the process on the front of the rack using the 65mm bolt-on lugs, then tighten the nuts Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage