BMW R 1200 GS LC

High-quality ABS sensor guard by ALTRIDER, custom-made for the below-mentioned, liquid-cooled BMW R 1200/1250 GS models. The BMW water boxer is a machine that lets riders take on expeditions across several continents and in every condition. The ABS sensor is a critical and expensive component that detects wheel speed, calculates traction control, and performs other dynamic functions for smooth operation. The ALTRIDER ABS sensor guard protects this vulnerable unit to ensure riders are able to get the most out of their increasingly sophisticated BMWs. ALTRIDER’s ABS sensor guard installs quickly and easily. The design hugs the mount point and is the only design with an anti-rotation tab. Machined from 1/16 inch (1.5 mm) thick laser-cut stainless steel, the guard is a slick addition to the front wheel hub while providing much needed protection. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for BMW R 1200 and 1250 GS LC / Adventure, R, RS and RT 1/16 inch (1.5 mm) thick stainless steel construction Laser cut, grain finished, formed All hardware included Simple 5-minute installation Protects the ABS sensor from debris Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned BMW models.The BMW R1200 and R1250 GS/GSA models are known for their large tilt angels, which cause the OEM side stands to easily sink into soft earth, gravel, or other uneven surfaces.The extremely robust ALTRIDER side stand featuring an infinite height adjustment and an enlarged foot plate reliably helps avoiding this unpleasant situation. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USAMade of tough steel and aluminium Infinite adjustable height setting, allowing heights of up to 1.7 inch (about 4.5 cm) higher than factory, or 0.25 inches (about 0.6 cm) lower than factory Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded springWorks with the original side stand sensor Available in black Fits: BMW R1200 GS/GSA from MY 2013BMW R1250 GS/GSA from MY 2013 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications  100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

The resilient face of this headlight guard by ALTRIDER for BMW R1200 GS is precision cut from impact-resistant polycarbonate which is formulated with a hardened, scratch-resistant surface both front and rear. The face attaches to the stainless steel frame with a sturdy, custom-machined aluminum ball-and-rubber socket connection which is free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The polycarbonate guard is also interchangeable with all other versions of the ALTRIDER headlight guard. NOTE: This version of the ALTRIDER headlight guard features an extension in the design to protect the LED heat sink or any accessory lights located beneath the main headlight. It is NOT compatible with the BMW R1200 GSW Adventure! The stainless steel frame of the polycarbonate headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. The installation is simple and does not require removal of the blinker stalks or any bodywork. The top is mounted using the OEM bolts while the bottom uses the provided stainless steel hardware. The metal frame is laser-cut and grain finished. The frame is available in a powder-coated black finish which is incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights. The ALTRIDER polycarbonate headlight guard also includes a specially designed glare guard. This durable vinyl decal attaches to the wind deflector below the windshield. The refined matte finish prevents light from reflecting off the windshield into the rider's eyes. Please note – while polycarbonate is an incredibly tough material, chemical based cleaners will rapidly break down the material (ex. alcohol, Windex, etc). Only warm water and mild soap should be used to clean the polycarbonate headlight guard. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Polycarbonate face resistant to impacts and specially treated to harden the surface to resist scratches Extended version - protects LED heat sink or accessory lights below headlight Custom-machined ball-and-socket connections allow removal of face without any tools Polycarbonate headlight guard interchangeable with all other versions of the ALTRIDER headlight guard Stainless steel frame provides strong foundation and is highly resistant to rust and weathering Compatible with halogen and LED headlights Fits BMW R1200 GS Frame available in powder-coated black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

The resilient face of this high-quality headlight guard by ALTRIDER for the BMW R 1200/R 1250 GS and GSA LC is precision-cut from impact-resistant polycarbonate – the same material as used in bullet-proof windows. This polycarbonate is formulated with a hardened, scratch-resistant surface on both front and rear. The face attaches to the stainless steel frame with a custom-machined, sturdy aluminum ball-and-rubber socket connection which is free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The polycarbonate guard is also interchangeable with all other versions of the ALTRIDER headlight guard. The stainless steel frame of the polycarbonate headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. Unlike other available headlight guards, installation is simple and does not require removal of the blinker stalks or any bodywork. The top is mounted using OEM bolts, while the bottom uses the provided stainless steel hardware. The metal frame is laser-cut and grain finished. The frame is available in a powdercoat black finish which is incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights. The ALTRIDER polycarbonate headlight guard also includes a specially designed glare guard. This durable vinyl decal attaches to the wind deflector below the windshield. The refined matte finish prevents light from reflecting off the windshield into the rider's eyes. Please note – While polycarbonate is an incredibly tough material, chemical-based cleaners will rapidly break down the material (ex. alcohol, Windex, etc). Only warm water and mild soap should be used to clean the polycarbonate headlight guard. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Polycarbonate face resistant to impacts and specially treated to harden the surface to resist scratches Custom-machined ball-and-socket connections allow removal of face without any tools Polycarbonate headlight guard interchangeable with all other versions of the ALTRIDER headlight guard Stainless steel frame provides strong foundation and is highly resistant to rust and weathering Compatible with halogen and LED headlights Frame available in powder-coated black finish Compatible with BMW R 1200/R 1250 GSW and GSW Adventure Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality ABS cylinder head guards by ALTRIDER, custom-made for the below-mentioned BMW R 1200 models. The ALTRIDER cylinder head guard is designed to protect the cylinder head from the scrapes and scratches that off-road riding often causes. ALTRIDER went to great lengths to engineer a system that distributes the load across the entire valve cover. Bolts are anchored both in front of and behind the cylinder head and hits are spread out evenly to minimize the impact force. The cylinder head guard is precision manufactured from 1/8 inch (3.2 mm) aluminum and compatible with the ALTRIDER crash bars. Each side features a replaceable CNC-machined aluminum skid pad, allowing to refresh the guards in the event of a mishap. The inside of the cylinder head guard utilize specially designed rubber pads to isolate it from the valve cover. Provided hardware makes installation a quick and simple job. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for BMW R 1200 GS LC / Adventure, R, RS and RT Fits with BMW OEM accessory crash bars and R1200 GS Adventure OE crash bars Easy installation Available in anodized black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. As every rider is different, there are two riser heights available depending on the riding style. For those needing additional customization, risers can also be swapped out. Enlarger The ever-changing terrain of off-road riding means the entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the rider's foot a greater surface area to work with, affording them more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25,4 mm (1") riser height Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Suitable for BMW R 1200 GS and 1250 GS Water Cooled Fitment on Adventure model requires installation of standard brake pedal, BMW part# 35-0380 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack system by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box (requires the Givi Top Case mounting kit). Compatible with the R 1200/R 1250 GSW Adventure with the rear luggage rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). An alternative configuration allows the simultaneous mounting of the pillion rack, factory plastic rack with grab handles, and rear rack in upper position bolted to the factory rack (see image above). The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Note: The pillion rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Dimensions: length = 27.9 inch (70.8 cm) x width = 16 inch (40.6 cm) Weight: 6 lbs (2.8 kg) Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in anodized black and silver - please select from above

High-quality pillion luggage rack by ALTRIDER, suitable for the  BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER pillion luggage rack is the only offering on the market to replace the rear seat and combine with the ALTRIDER Rear Luggage Rack (available separately) for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. For the ultimate carrying capacity, combine the pillion rack with ALTRIDER's Luggage Rack System (available separately). The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Also compatible with the R 1200/R 1250 GSW Adventure (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of ALTRIDER's Luggage Rack System for the BMW R 1200/R 1250 GS + GSA LC (Rear luggage rack available separately - see below) Dimensions: Length = 14.4 inch (36.6 cm) x Width = 12.4 inch (31.5 cm) Weight: 3 lbs (1.4 kg) Mounts using pillion seat keyed latch – no hardware or tools required Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in anodized black and silver  - please select from aboveManufacturer:AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality radiator guard by ALTRIDER, suitable for the BMW R 1200 GSW Adventure, MY 2014-2017. Made from 1/16” (1.6 mm) anodized aluminum, the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris, while simultaneously directing airflow through the radiator to keep the water boxer cool. The guard is held in place using OEM hardware and the stock radiator shroud. Installation is a breeze – simply remove the three bolts holding the shroud in place, insert the guard, and reinstall the shroud. There are no spacers to deal with or hardware to add, and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 1.6 mm anodized aluminum protects radiator from dangerous debris Louvered design provides coverage without restricting airflow Simple to install with provided hardware Fits BMW 1200 GS Adventure water cooled - MY 2014-2017 Available in anodized silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality radiator guard by ALTRIDER, suitable for the BMW R 1200 GSW. Made from 1/16” (1.6 mm) anodized aluminum, the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris, while simultaneously directing airflow through the radiator to keep the water boxer cool. The guard is held in place using OEM hardware and the stock radiator shroud. Installation is a breeze – simply remove the three bolts holding the shroud in place, insert the guard, and reinstall the shroud. There are no spacers to deal with or hardware to add, and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 1.6 mm anodized aluminum protects radiator from dangerous debris Louvered design provides coverage without restricting airflow Simple to install with the provided hardware Fits BMW 1200 GS water cooled Available in anodized silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality rear brake master cylinder guard by ALTRIDER, suitable for the BMW R 1200/R 1250 GS and Adventure LC. The a. m. BMW models check in at over 500 pounds without a rider - requiring every bit of braking power to stop in a hurry. This custom-made rear brake reservoir guard by ALTRIDER provides reliable safety for the rear brakes. Constructed from lightweight aluminum, the the guard keeps errant rocks and debris from taking out the rider's ability stop. The deliberate design of the guard locks the cover in place, preventing contamination of the delicate braking system.  Available in anodized silver or black. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Anodized aluminum provides robust yet lightweight protection Compatible with R 1200/R 1250 GSW + GSW Adventure Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER luggage rack has been constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. Installation is quick and easy with the included stainless steel hardware. The luggage rack is pre-drilled for easy integration with ROTOPAX or OVERLAND-FUEL mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokeyhard mount points, allowing for use with any Monokey-compatible top box. Compatible with the R 1200/R 1250 GSW Adventure with the rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is only compatible with the original BMW Vario side cases when mounted in the upper position!Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of the ALTRIDER Luggage System for the R 1200/R 1250 GS LC (Pillion Rack available separately - see below) Dimensions: length = 13.5 inch (34.3 cm) x width = 16 inch (40.6 cm) Weight: 3 lbs (1.4 kg)  Mounts in upper or lower position, without additional brackets or removing the pillion seat Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX or OVERLAND FUEL mounts and GIVI Monokey top cases Available in anodized black and silver  - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality side stand foot enlarger by ALTRIDER, offering substantially more safety and comfort on off-road terrain. Custom-made for BMW R 1200 and 1250 GS GSA models. Made from 1/8 inch (3.18 mm) stainless steel, this article features a 3D tread to create better traction for the boots and to allow an easy pulling down of the side stand while still on the bike. Even after months of use, the ALTRIDER side stand foot will remain tight because it clamps down on the actual foot of the side stand with Torx fasteners. Specifications 100% designed and manufactured in the USA Offering excellent resistance against corrosion and weather Two-piece design for a perfect fit Minimal weight to avoid accidental deployment during riding Torx fasteners (requires T-25 Torx driver) Delivery includes the necessary mounting material Available in powder-coated black Fits: BMW R1200 GS                     from MY 2015 BMW R1200 GSA                   from MY 2014 BMW R1250 GS und GSA      from MY 2019 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality riser plate for the side stand enlarger by ALTRIDER (available separately), fitting the below-mentioned BMW models. While the above-mentioned side stand enlarger will help the bike keep a firm footing on loose or softer surfaces, the riser plate can be installed to prop the bike into a slightly more upright position. It can change the BMW's lean angle by as much as 5°, which improves the saftey of mounting and dismounting, making all the difference at the end of a long day of riding. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made from 0.25 inch (6.4 mm) thick stainless steel Laser-cut design for a perfect fit Extremely tough and resistant to rust and weather influences Available in powder-coated black Fits: BMW R 1200 GS                    MY 2013 and from MY 2015 BMW R1200 GSA                   from MY 2014 BMW R1250 GS und GSA      from MY 2019 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality skid plate by ALTRIDER, suitable for the liquid-cooled BMW R1200 GS MY 2016 and up.This skid plate was completely redesigned for the a. m. BMW model. To maintain greater ground clearance, a flat plate of 3/16” (4.76 mm) anodized aluminum is utilized, with no bolts on the bottom side to snag, saving over 1 inch of ground clearance. The plate was designed to be extremely narrow at the bottom to maintain the great cornering ability of the bike. From the leading front corner of the headers to just before the rear tire, the entire bottom side of the motor is shielded from impact. Even the catalytic converter is safeguarded. The ALTRIDER skid plate is the only design on the market that doesn’t rely on the engine as a mounting point. The front of the ALTRIDER plate gets its brute strength from 3/16” (4.76 mm) stainless steel brackets that mount directly to the frame. The brackets are secured with two sturdy M12 torx frame bolts, preventing the flange from pivoting on impact. Another key innovation of the ALTRIDER design are the rear mounting points. These long brackets have more leverage, allowing impacts to create shearing or bending forces that break the mount. The ALTRIDER skid plate is held in place with two custom-machined fasteners that replace the center stand pins, lowering the mounting point by a notable 4” which dramatically reduces leverage. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 3/16” (4.76 mm) hand TIG welded anodized aluminum Protects entire bottom side of the liquid cooled motor, including headers and catalytic converter Oil change does not require removal of skid plate One-piece unit that provides tire to tire protection Simple to install All stainless steel hardware is provided Patent pending Available in black NOTE: Does not fit any BMW R1200 GS Adventure models! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Including Barendweights Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Suitable for: BMW R 1100 GS 259 1993 – 1999BMW R 1150 GS R21 1999 – 2004BMW R 1150 GS Adventure R21 2002 – 2005Yamaha XT 660 Z Tenere DM02 from 2008 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for BMW and Triumph models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installationIncluding Barendweights Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Suitable for:  BMW F650GS - twin engine     2008-2012 BMW F800GS                            2008-2012 BMW R1200GS                          up to MY 2012 BMW R1200GSA                        up to MY 2013 BMW HP2 Megamoto               2007-2009 TRIUMPH Tiger 1050 Sport      up to MY 2013 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for BMW models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit and bar end weights included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Suitable for:  BMW R1200GS                     2013 - 2017 BMW R1200GSA                   2014 - 2018 BMW R1200R                        from MY 2015  BMW S1000XR                      from MY 2015 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor