Aprilia Tuareg 660

High-quality, adjustable side stand by ALTRIDER, custom-made for the Aprilia Tuareg 660 model.  The ALTRIDER Adjustable Side Stand is the only side stand for the Aprilia Tuareg 660 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1.5 inches (3.8 cm) higher than factory, and 1.5 inches (3.8 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications  100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Aprilia Tuareg 660 model. While the OEM Aprilia clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a rider's hand and forearm. The ALTRIDER extension helps reducing the rider's fatigue, at the same time increasing the clutch feel. Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized black Note: This clutch arm does not feature any cut-in splines. As soon as it is tightened around the clutch rod, the aluminum of the clutch arm will bite into the splines on the clutch rod. The aluminum facilitates a secure connection that does not slip, at the same time offering a lightweight design. Caution: There are known reports of casting flaws with the original Aprilia clutch cover. Do not over tighten the M8 bolt in the clutch cover that attaches the cable, as it may cause damage to the clutch cover. <iframe width="560" height="315" src="https://www.youtube.com/embed/ojMm_COsArg?si=M8aAse0v1oG6gTW2" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/x_DU8FDP3Dw?si=prckqGWnXhHSyf1q" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position, regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USA Suitable for the Aprilia Tuareg 660  Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 25,4 mm (1 inch) riser height available Pins provided with enlarger for enhanced grip, extras included Kit available in black Patent Pending Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality variable height suspension linkage by ALTRIDER, tailor-made for the Aprilia Tuareg 660 model. ALTRIDER presents the only linkage on the market with an integrated plastic protection which does not transmit any shocks like other rigid protection devices and does not stick to the linkage like aluminium. This highly robust and durable linkage is used to adjust the suspension in order to either lower or raise the seat height. The seat can be lowered by 19 mm (0.74 inches) or by 32 mm (1.25 inches), or raised by 6 mm (0.24 inches) or 20 mm (0.78 inches), both in comparison with the factory height. Lowering the seat is recommended to make it easier and more comfortable to place both feet on the ground when stopping on uneven terrain or for more safety in traffic, i. e. generally to ensure a stable standing. On the other hand, the linkage allows the suspension height to be gradually raised in order to suit the rider's impriving skills. The adjustments are made using inserts in which the seat height setting is engraved by laser. Each insert has two different holes and can be rotated in two different ways, so that a total of four different ride heights are possible (see above). In combination with the innovative, Adjustable Aluminum Side Stand by ALTRIDER for the Aprilia 660 Tuareg (available separately, see below), the ALTRIDER height suspension linkage always provides reliable support, regardless of how the suspension height is set. Specifications Designed and manufactured in the USA Made from precision CNC machined billet aluminum with aircraft quality anodized finish Weighs only 1.9 oz (54 grams) more than OEM linkage Needle bearings with integrated dust seals to provide OEM level ingress protection Robust 6mm thick UHMW integrated linkage guard to protect the lower shock mount (removable with 3x M6 flush mounted fasteners) Available in anodized black Note: Lowering or raising the rear of the motorcycle changes the geometry and handling of the vehicle. Therefore, please make the necessary adjustments to the fork height in order to adapt it to the original geometry or to the respective riding preferences! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for the Aprilia Tuareg 660 model from MY 2022. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Complete, high-quality VPS open ended MX handguard set by BARKBUSTERS. Specifications Single point mount (open ended) design, suitable for motocross and enduro bikes Including alloy handlebar clamps with high-strength nylon brackets Universal design - allows for plenty of adjustment in most directions Delivery includes 1 set of highly impact-resistant VPS plastic guards, available in various different colours (please select from above) For added protection, incorporate a variable-height BARKBUSTERS Wind Deflector Set (sold separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Aprilia Tuareg 660 model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, and panniers as well as the KRIEGA US-Drypacks as top bags, and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two alloy mounts for Aprilia Tuareg 660 included in the delivery, which are simply exchanged for the original mountings. This innovative mounting solution ensures a safe and reliable transport of luggage, even in challenging terrain. The set length straps make mounting a breeze and the purpose-designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). Specifications Specifically designed and manufactured for the Aprilia Tuareg 660 models Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x 120mm Frame Loops, 2 x Sub-Frame Loops and 2 x Aprilia Tuareg alloy mountsAvailable in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, compact tie down mounting plates by KRIEGA, designed to be fixed instead of the pillion footrests (see the a. m. image) and custom-made to fit the Aprilia Tuareg 660 model. The brackets are made of a sturdy synthetic material and provide an improved mounting location for the KRIEGA OS-Base (available separately, see below). Specifications Delivered in pairs Weight: 85 g / 3 oz per pair Available in black Made of ultra-durable, CNC machined Nylon-6 Installation Hardware included. Mounted instead of the pillion footrests (NOTE: Delivery does not include any panniers or saddlebags!) Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

The black anodized Vario relocation converter, made of robust, CNC-machined aluminum for mounting 28 mm handlebars, allows a relocation of 50 mm, or even 60 mm with a spacer, from the original handlebar position.Maximum flexibility: Vario handlebar relocations allow for continuous forward and backward adjustment as well as variable height adjustment. The adapters thus offer the greatest possible flexibility when adjusting the steering and thus seating position. For vehicles with a 22 mm handlebar mount for mounting 28 mm handlebarsCorrosion protection thanks to black anodizingVariable handlebar riser and relocation for individual handlebar positioning by 50 mmSpacer for optional rise of an additional 10 mmModel-specific design for the best fitCNC-machined from high-strength aluminum alloy Scope of delivery 2 x Vario handlebar risers/converters2 x spacers (10 mm)Installation instructionsMounting hardware DetailsMaterial: aluminumFinish: anodizedColor: blackTotal weight: approx. 0.5 kg NoteNot approved for use in Germany under the German Road Traffic Licensing Regulations (StVZO).The length of the Bowden cables and brake lines must be checked individually. Approval informationThe ABE certificate booklet supplied with the product must always be carried when riding. This ABE is only valid for the listed models and in compliance with the information in the installation instructions. An entry in the vehicle documents is not necessary if you carry the document with you.

High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the Aprilia Tuareg 660 model (all years). Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 1/2" (1.2 cm) lower than the original foot pegs Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensationDelivered as pair (left + right) Available in black Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor