Various other items

High-quality, adjustable side stand by ALTRIDER, custom-made for the Aprilia Tuareg 660 model.  The ALTRIDER Adjustable Side Stand is the only side stand for the Aprilia Tuareg 660 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1.5 inches (3.8 cm) higher than factory, and 1.5 inches (3.8 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned BMW models.The BMW R1200 and R1250 GS/GSA models are known for their large tilt angels, which cause the OEM side stands to easily sink into soft earth, gravel, or other uneven surfaces.The extremely robust ALTRIDER side stand featuring an infinite height adjustment and an enlarged foot plate reliably helps avoiding this unpleasant situation. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USAMade of tough steel and aluminium Infinite adjustable height setting, allowing heights of up to 1.7 inch (about 4.5 cm) higher than factory, or 0.25 inches (about 0.6 cm) lower than factory Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded springWorks with the original side stand sensor Available in black Fits: BMW R1200 GS/GSA from MY 2013BMW R1250 GS/GSA from MY 2013 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Height-adjustable side stand in proven ALTRIDER quality, custom-made for the BMW R1300 GS models.This high-quality side stand fits all of the a. m. BMW models with a wide range of suspension travel lengths. It works not only for lowered models, but also for higher ones.The BMW R1300 GS is known for its large lean angle. Lifting the heavy GS off the factory side stand can be a challenge, especially for smaller riders, as BMW also designed the side stand for heavy loads. ALTRIDER has developed a durable side stand for these situations that suits every chassis height and loading situation. The result is two-piece, built to last, and easy to adjust. Specifications Designed and manufactured in the USAAdjustable from stock length to +50mm (2") in 6mm (0,25") incrementsThe foot provides a large and stable contact area, regardless of terrain or chassis heightEnlarged integrated foot: A significantly larger, convex footprint with a serrated foot design for maximum grip - no more sinking or tipping into soft groundRemovable kickstand footpeg for easier deployment - no more awkward grippingSolid aluminum construction: Designed to support the weight of a fully loaded BMW R1300 GSIntegrated rubber bumper to prevent rattling - no risk of lossInstallation by using stock parts and spring -  spring tensioning tool includedCompatible with the factory side stand switchAvailable in black Fits: BMW R1300 GSBMW R1300 GS Adventure Item number R130-2-2301 fits the following BMW side stand numbers: 4653 1636279 - Standard GS models4653 1638616 - Height-adjustable GS & Comfort (lowered) GSA Item number R130-2-2302 fits the following BMW side stand numbers: 4653 5A8DC01 - Adaptive GSA4653 1638149 - Standard GSA & Sport Suspension GS Please note: It is necessary to check all the pre-assembled fasteners and components, as they may not be factory-applied with Loctite. Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original BMW side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for the below-mentioned Honda models.  The ALTRIDER Adjustable Side Stand is the only side stand for the CRF1000L and CRF1100L Africa Twin that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at an optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Fits: Honda CRF1000L Africa Twin/ ADV Sports Honda CRF1100 Africa Twin/ ADV Sports Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for the models mentioned below. The ALTRIDER Adjustable Side Stand is the only side stand works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA Adjustable height settings, including factory height, 0.5 inch (1.3 cm) longer than factory, or 1.5 inch (3.8 cm) shorter than factory Foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot (+20%), preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black  Fits: KTM 690 Enduro Husqvarna 701 Enduro GasGas ES 700 Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original KTM cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for Yamaha Tenere 700 models MY 2019-2024.  The ALTRIDER Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black  Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original YAMAHA cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable windscreen risers by ALTRIDER, custom-made for the Yamaha Tenere 700  MY 2019-2024 (see below). The Yamaha Tenere 700 is a great all around bike for both on- and off-road riding. However, most riders find that the windscreen is just not tall enough, and are hit with wind buffeting, bugs to the visor and excess noise. To alleviate these issues, ALTRIDER designed an adjustable windscreen riser for the Yamaha Tenere 700, with a minimum 10mm rise over stock at the lowest setting and a 90mm adjustment range, for a total 100mm increase at the highest setting over the stock windscreen. Given the ultimate range of adjustment, the ALTRIDER Windscreen Riser can eliminate buffeting for a wide range of riders' heights. Specifications Designed and manufactured in the USA CNC-machined from 6061 T6 aircraft-grade aluminum Variably adjustable with a minimum height increase of 10 mm and a maximum increase of 100 mm Easy to install within minutes using the included hardware Adjustable on the fly with CNC-machined knurled thumb nuts - no tools required Laser-etched ALTRIDER "A" and "T7" logos  Compatible with the ALTRIDER T7 Cowl Support (available separately, see below) as well as any GPS mounts and handlebar risers Anodized black finish Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024NOTE: Delivery does NOT include any windscreens! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clear headlight guard by ALTRIDER, suitable for BMW F 750 / 850 GS models. The front ends of the above-mentioned BMW models sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening it at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bikes' aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States from laser-cut stainless steel, the mesh headlight guard mounts to four factory hard points by way of the laser-cut stainless steel mounting bracket. The quick-release system means no tools are required to remove the mesh screen for cleaning in the field. Specifications Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Extremely resistant against corrosion and weather Delivery includes the necessary mounting material Available in black powder-coated  Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality side stand switch guard by ALTRIDER, custom-made for the below-mentioned BMW models.The uniquely elegant design of this innovative accessory with its 2-point attachment ensures complete coverage of the sensitive side stand switch of the BMW R1300, thus offering solid protection in any riding situation. Specifications 100% designed and manufactured in the USAMade from a solid piece of billet aluminiumDelivery includes a spring puller for an easy installationMounting material and operating instructions (???) included Available in black anodised (???) Fits: BMW R1300 GSBMW R1300 GS Adventure Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality repair kit for bowden cables by JMP, suitable for almost all kinds of bowden cables.Delivery includes: 1 Bowden cable - diameter: 1.50 mm, length: 2.00 m, including one soldered nipple 1 Bowden cable - diameter: 1.20 mm, length: 2.00 m, including one soldered nipple 9 separate nipples, suitable for most motorcycles and mopeds Packed in a round box Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor

High-quality set of 2 front fork seal covers by KRIEGA, offering an effective protection from mud and dirt. The KRIEGA covers are fixed by velcro, making them extremely easy to fit, which means no fork disassembly is required. They can be fitted without cable ties, but it is recommended to use the ties for an increased service life by protecting the covers' material from the fork slider. Specifications Made from tough NEOSKIN (coated neoprene) Delivered in pairs Weight: 30 grams Universal fit by velcro - hook and loop design Easy to clean for more efficiency No fork disassembly required Use with or without cable ties USD fitment only 3M Scotchlite reflective print Available in black with silver logos Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Haul loop by KRIEGA made of tough synthetic material, fitting the front fork of dirt bikes. Front fork straps are an essential equipment for extreme enduro events. KRIEGA's unique design is a self-supporting/semi-rigid solution, which is always easy to find and use. Specifications Abrasion-resistant reinforcement made of Hypalon® TOUGHTEK - grips wet or dry Stainless steel buckles 10-year guarantee - learn more Fitting There are 2 methods of fitting the front Haul Loop. Both use 2 x heavy-duty cable ties: Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp. Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic. The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, functional tool roll by KRIEGA, made of tough synthetic material. Featuring various heavy-duty zipped pockets and an aluminium rail with 8 fixings, alternatively replacing 5 elastic loops (see images above). Note: Delivery does NOT include any tools!  Specifications Made of 1000D Cordura® and Hypalon Size: 460 mm x 270 mm / 18 x 10.6 inch (L x W, unfolded), 270 mm (W) x 95 mm (Ø) minimum size folded, 270 mm (W) x 135 mm (Ø) maximum size folded Weight: 0.5 kg net Adjustable cam strap fastening with hook closure Delivery includes 8 adjustable 3/8" BIT fixings on a 6061-T6 aluminium rail - 3 further socket rails featuring 1/2", 3/8" and 1/4" fittings available separately as spares (see below) Mesh pocket made of Hypalon with YKK zip, extremely tough and durable 2 further zipped pockets for small items, size: about 240 mm x 90 mm x 30 mm each Tools NOT included! Available in black 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Haul loop by KRIEGA made of tough synthetic material, fitting the rear fenders of dirt bikes. Rear fender straps are an essential equipment for extreme enduro events. KRIEGA's unique design is a self-supporting/semi-rigid solution, which is always easy to find and use. Specifications Abrasion-resistant reinforcement made of Hypalon® TOUGHTEK - grips wet or dry Stainless steel buckles 10-year guarantee - learn more Fitting The fitting methods for the rear Haul Loop are more varied than for the front Haul Loop. The basic requirement is to get the strap around the rear sub-frame as easily as possible. Some applications may require the rear or side panels to be cut to allow the web to exit in the correct manner (holes in the fender plastic are best formed by a soldering iron). Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, functional tool roll by KRIEGA, featuring a highly individual design. Available in two different versions - please select from above. The Roland Sands Design X KRIEGA Roam Tool Roll is an indispensable piece of kit on any road trip. Constructed from RSD’s propriety wax cotton together with 1000D Cordura® and a super tough Hypalon reinforcement, the roll offers an interesting blend of strong and durable classic and modern materials with a technical twist. Note: Delivery does NOT include any tools!  Specifications Made of RSD waxed cotton and 1000D Cordura® Size: 270 mm x  110 mm (length x diameter, empty and folded) - 170 mm diameter at maximum fill level Weight: 0.6 kg net Capacity: 4 liters 3 rows featuring 5 elastic loops each (Note: any 5 loops will be covered by fixing one BIT rail!) 8 adjustable 3/8" BIT fixings on a 6061-T6 aluminium rail - 3 further socket rails featuring 1/2", 3/8" and 1/4" fittings available separately as spares (see below) Adjustable cam strap fastening MOLLE modular mounting system with 4 adjustable straps 4 zipped inner pockets featuring large YKK zips - size per pocket: 240 mm x 90 mm x 30 mm Heavy-duty carrying handle Available in black and Ranger - please select from above Tools NOT included! 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality aluminium socket rail with 8 fixings available in 3 different sizes, specifically designed as an additional and/or spare part for the mounting of tools by adjustable BIT fixings on the KRIEGA OS-Tool and Roam Tool Rolls (available separately, see below). Note: Delivery of each of the a. m. tool rolls includes one rail with 3/8" fixings! Specifications Made of tough 6061-T6 aluminium Each rail includes 8 adjustable BIT fixings Easy mounting on the two a. m. KRIEGA rolls by means of the included screws Available in the fixing sizes 1/4", 1/2" and 3/8" - please select from above 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Functional, compact tool roll by KRIEGA, made of tough synthetic material. Fitting with KRIEGA R3, R11 and US-5 packs (included with R8 waist pack). Specifications Size: 550 mm x 225 mm (L x W, unfolded), 135 mm x 225 mm (L x W, folded) Made of 1000D Dupont® Cordura® Velcro® closure strap Including 30 elastic loops Coated-mesh zip pocket Tools NOT included 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

SM-Line Plastic Front FenderPolisport plastics are made from injected plastic developed in-house. All plastics feature DGP (Durable Polypropylene Gloss), whose main advantages are high strength and a beautiful glossy finish.Identical to the plastics used in MXGP Manufacturer Polisport Plásticos S.A.Travessa da Zona Industrial nº2 Vila Cova de Perrinho 3730-601 - Vale de Cambra, PortugalHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage

RACE FX Pro Series CNC front brake reservoir cap made of high-grade anodised aluminium, suitable for the below-mentioned Yamaha models. Suitable for: Yamaha YZ125/250   2008-2014 YZF250        2007-2014 YZF450        2008-2014 Manufacturer RaceFX LtdChallenge WayBlackburn BB1 5QB, United KingdomHomepageDistributionoffroad-kontor

Premium front brake reservoir cap by RACE FX, suitable for the below-mentioned KTM models without hot start levers. All RFX Pro Series reservoir covers are CNC machined from aerospace aluminium and are a perfect factory-style replacement for standard reservoir caps. Available in orange and black - please select from above. Suitable for: KTM 125-525 - 2000-2013, all models Manufacturer RaceFX LtdChallenge WayBlackburn BB1 5QB, United KingdomHomepageDistributionoffroad-kontor

High-quality center stand by SW-MOTECH, specifically designed for the KTM 790 Adventure  MY 2019-2020. This indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, making it easy to prop up the bike and providing stability - whether during maintenance or on the road. In most cases, it will no longer be necessary to buy an additional swing arm stand. Furthermore, during the long winter downtimes, the centerstand helps take the load off the bike's tyres. Specifications Made of tough steel tube Careful finish for reliable durability and function Stands securely when traveling with lots of luggage and during maintenance Bike-specific design for easy mounting and high cornering clearance Outrigger for optimal leverage Available in black powder-coated Delivery includes mounting material and instructions Including model-specific General Operating Permit (ABE) for public roads in Germany

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in blue anodised Suitable for: Husqvarna 701 Enduro / SM (all) Husqvarna 701 LR "Long Range" (fits both front and rear tanks) GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM model. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro from MY 2019 NOTE: From MY 2021, the seat release has been relocated to an unfavorable position within the tank cap. In order not to have to completely unscrew the VANASCHE MOTORSPORTS tank cap every time to remove the seat, we recommend to use a cable tie to move the seat release under the rear fender (as shown in the last picture above). Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, custom-made for the KTM 790/890 R/S/Rally models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications 100% made in the USA CNC machined from a solid piece of high-strength, aircraft grade aluminum 33% Lighter weight than OEM assembly (400g vs 600g) Provides for an easy filling of the tank without using the ignition key Filler hole is inline with fuel tank hole - properly offset like no other design on the market. No abrupt lips or edges inside filler hole to cause splashing or back spatter of fuel No counterbored holes to collect dirt Venting from side port to allow mounting of a tank bag without constricting tank breathing Delivery includes all the necessary mounting material, as well as a new Viton O-ring which is also necessary for the installation Available in black anodised Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor