Motorbike Protection

High-quality ABS sensor guard by ALTRIDER, custom-made for the below-mentioned BMW R1300 GS / GSA models. The ABS sensor is a critical and expensive component that detects wheel speed, calculates traction control, and performs other dynamic functions for smooth operation. The ALTRIDER ABS sensor guard protects this vulnerable unit to ensure riders are able to get the most out of their increasingly sophisticated BMWs. ALTRIDER’s ABS sensor guard installs quickly and easily. The design hugs the mount point and is the only design with an anti-rotation tab. Machined from 1/16 inch (1.5 mm) thick laser-cut stainless steel, the guard is a slick addition to the front wheel hub while providing much needed protection. Specifications 100% designed and manufactured in the USA Material: Extremely durable billet aluminiumMade from one piece All hardware and installation guide (???) included Quick and easy to install Fits BMW R1300 GS and GS Adventure Available in black anodised (???) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for Yamaha Tenere 700 models MY 2019-2024.  The ALTRIDER Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black  Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original YAMAHA cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, adjustable side stand by ALTRIDER, custom-made for Yamaha Tenere 700 models MY 2025 and up.  The ALTRIDER Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USAAnodized 6061-T6 billet aluminium 7 adjustable height settings, including factory height, 1 inch (2.5 cm) lower than factory, or two inches (5 cm)  higher than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black  Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original YAMAHA cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

The resilient face of this headlight guard by ALTRIDER for BMW R1200 GS is precision cut from impact-resistant polycarbonate which is formulated with a hardened, scratch-resistant surface both front and rear. The face attaches to the stainless steel frame with a sturdy, custom-machined aluminum ball-and-rubber socket connection which is free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The polycarbonate guard is also interchangeable with all other versions of the ALTRIDER headlight guard. NOTE: This version of the ALTRIDER headlight guard features an extension in the design to protect the LED heat sink or any accessory lights located beneath the main headlight. It is NOT compatible with the BMW R1200 GSW Adventure! The stainless steel frame of the polycarbonate headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. The installation is simple and does not require removal of the blinker stalks or any bodywork. The top is mounted using the OEM bolts while the bottom uses the provided stainless steel hardware. The metal frame is laser-cut and grain finished. The frame is available in a powder-coated black finish which is incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights. The ALTRIDER polycarbonate headlight guard also includes a specially designed glare guard. This durable vinyl decal attaches to the wind deflector below the windshield. The refined matte finish prevents light from reflecting off the windshield into the rider's eyes. Please note – while polycarbonate is an incredibly tough material, chemical based cleaners will rapidly break down the material (ex. alcohol, Windex, etc). Only warm water and mild soap should be used to clean the polycarbonate headlight guard. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Polycarbonate face resistant to impacts and specially treated to harden the surface to resist scratches Extended version - protects LED heat sink or accessory lights below headlight Custom-machined ball-and-socket connections allow removal of face without any tools Polycarbonate headlight guard interchangeable with all other versions of the ALTRIDER headlight guard Stainless steel frame provides strong foundation and is highly resistant to rust and weathering Compatible with halogen and LED headlights Fits BMW R1200 GS Frame available in powder-coated black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, clear headlight guard by ALTRIDER made of tough polycarbonate, suitable for the BMW F 750 / 850 GS models. The front ends of the above-mentioned BMW models sport a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in powder-coated black NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black Note: NOT compatible with the OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Standad (does NOT fit the Adventure Sports models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Improper cleaning can result in scratches, hazing, surface crazing and cracking. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clear headlight guard by ALTRIDER, custom-made of tough polycarbonate for the below-mentioned Honda model. The front end of the Africa Twin sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bike’s aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States, the ALTRIDER clear headlight guard mounts to four factory hard points by way of the 2 mm thick, laser-cut stainless steel mounting bracket. The quick release system means no tools are required to remove the polycarbonate lens for cleaning in the field. Specifications Made of 4.7 mm scratch-resistant polycarbonate Bracket made of 2 mm laser-cut stainless steel Fixed by using 4 OEM mounting points No-tools quick-release face for easy cleaning Available in powder-coated black NOT compatible with OEM upper light bar! Suitable for: Honda CRF1100L Africa Twin Adventure Sports (does NOT fit the Standard models!) NOTE: Polycarbonate will react to certain chemicals and requires specific care to clean correctly and keep looking good for the long haul. Cleaning improperly can result in scratches, hazing, surface crazing and cracking. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clear headlight guard by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. Constructed in the United States from 3/16 inch (4.7 mm) thick scratch-resistant polycarbonate, the ALTRIDER headlight guard is made of extremely strong, impact-resistant polycarbonate - the same material as bullet-proof windows. This material is formulated with a hardened scratch-resistant surface, both front and rear. The dual lenses are secured with two 1/16 inch (2 mm) laser-cut textured powder coat steel brackets that are extremely resistant to rust and weathering.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets, using custom-machined aluminum ball studs and rubber sockets to mount the lens to the frame. The no-tools quick-release system allows for easy removal of the face for cleaning. NOTE: Polycarbonate will react to certain chemicals and requires specific care to be cleaned correctly and kept looking good for the long haul. Improper cleaning can result in scratches, hazing surface and cracking. Specifications 100% designed and manufactured in the USA Polycarbonate lens protects headlight without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clutch arm guard by ALTRIDER made of tough aluminum, suitable for the Honda CRF 1000 L Africa Twin model (see below). The Africa Twin’s clutch articulation arm and cable sit exposed on the right hand side of the engine case, covered only by an OEM plastic cover which offers virtually no protection. ALTRIDER’s clutch arm guard for the Africa Twin replaces the plastic cover with far greater coverage to this vital area while offering a clean aesthetic to the right side engine case.More robust than other clutch arm covers on the market, ALTRIDER’s design incorporates three unique mounting points to evenly distribute the load from impacts across the guard. With strategic mounting points and bends, the design is engineered to counter the stresses placed on thin aluminum parts after a lifetime of engine vibrations. ALTRIDER’s clutch arm guard is laser-cut out of 2 mm thick 5052 aluminum and features a formed, anodized and grained surface for maximum durability. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum for robust yet lightweight protection Suitable for Honda CRF 1000 L Africa Twin, including Adventure Sports (NON-DCT-only!) Available in silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clutch side engine case cover by ALTRIDER, suitable for the below-mentioned KTM Adventure models. The OEM engine case on the KTM Adventure/R and SA models is made from a thin-walled cast aluminum. This choice helps to save overall weight, but also creates a weak point on a vital piece of the engine. If the KTM Adventure/R and SA models are laid down on their right sides, there is a real danger of the engine case becoming damaged by large debris or even from the brake lever tip bending into it, potentially bursting into the case. Compared to several competitor options made from molded plastic, ALTRIDER created an engine case cover made from a single piece of 3.2 mm aluminum. This exceptionally strong 6061-TG6 aluminum alloy has a tensile strength of at least 42,000 psi (300 MPa) and yield strength of at least 35,000 psi 241 MPa. Rubber backers spread the load of impact, as well as allow the cover to maintain a low profile. Flush stainless steel fasteners and a deburred product prevent scuffing up the rider's boots and pants. The design of the case cover also incorporates the ingenuity of the ALTRIDER Brake Lever Shield, preventing unwanted and unexpected early braking. The close design of the OEM brake lever creates early interference with the rider's boot during braking. This is unique to the KTM Adventure/R and SA models as KTM worked hard to make the large displacement engine still feel narrow, which in turn provided little options for routing the rear brake lever. The lever arm extends into the rider boot area above the brake tip, thus creating earlier-than-expected braking. An outward flange on the ALTRIDER Engine Case Cover prevents accidental engagement of the brake arm while still providing a surface to properly hug the bike with the boot, all without interrupting any feel or ergonomics. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Protects engine case from damage caused by debris or rear brake lever Prevents accidental engagement of rear brake Easy installation with flush mount hardware  Deburred to prevent snagged or caught clothing Made of 3.2 mm (1/8 in.) aluminum Available in black Suitable for KTM 1050 1090 1190 Adventure/R and 1290 SA Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Stylishly designed cowl support bracket by ALTRIDER, suitable for the below-mentioned Yamaha models. All in all, the Yamaha Tenere 700 is an excellent model. However, the OEM headlight and cluster assemblies are mounted inadequately regarding any tough off-road riding, which can result in unwanted and excessive shaking and wobbling or even in a strobe light effect from the headlight on larger bumps. This typically occurs when riding down a dirt or gravel road, over a rail crossing or any other similar bumps. To assist in reducing or eliminating this unwanted shaking and to help brace the OEM headlight and cluster assembly, ALTRIDER has designed the cowl support bracket for the Tenere 700. This practical item serves to stabilize the OEM instrument panel and any accessories mounted to the cross bar, including tablets and GPS. The ALTRIDER cowl support functions as a strong link between the rear of the TFT display and the windshield brace bar, which can also be used as a GPS mount bar. Its design imparts stability by tying these items into a triangle. The instrument cluster as well as the windscreen and headlight mount points are unified by the specially formed cowl support. Specifications Made in the USA Formed from 14 gauge (0.6 "/1.6 mm thick) steel Mounts to OEM locations with both included hardware and OEM hardware Reduces movement and/or shaking of the instrument cluster and headlight wobble Available in powder-coated black and brushed silver - please select from above Suitable for:Yamaha Tenere 700 Standard     2019-2023Yamaha Tenere 700 Rally            2020-2023Yamaha Tenere 700 World Raid  2022-2023 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Practical set combining a skid plate with crash bars in proven ALTRIDER quality, custom-made for the BMW R1300 GS + GSA models. Available in silver and black - please select from above. The skid plate offers reliable protection against impacts of all kinds, as well as against soiling from the outside. Thanks to the new, innovative Energy Absorption System (EAS), the impact energy is distributed evenly and thus the effects of any impacts and bumps are significantly reduced. The unique shape tightly conforms to the underside of the bike, offering reliable protection for the highly sensitive headers and cross pipe.  The ALTRIDER skid plate is the only design on the market that does not rely on the engine as a mounting point, meaning that it is held in place with two custom-machined fasteners that replace the OEM center stand pins, at the same time maintaining full use of the center stand.The ALTRIDER crash bars are the only ones on the market with a tube diameter of 31.75 mm (1.25 inch). This means that the bars are more than twice as stable as crash bars with 25.4 mm (1 inch) tubes, while weighing only 10% more. The crash bars are fixed at four secure mounting points on both sides of the skid plate using 4.76 mm (3/16 inch) thick flanges. The rear upper bracket is secured with a large, specially machined M14 grade 8.8 bolt that replaces the engine mounting hardware. ALTRIDER offers the only specially machined through-bolt for increased strength available on the market. There are no plastic spacers or shock absorbers to break on impact. This creates an extremely strong connection between the crash bars and the skid plate while maintaining a narrow design that distributes any impacts and shocks evenly throughout the bars.Both the skid plate and the crash bars can also be installed individually. Specifications - Skid Plate 100% designed and manufactured in the USA Made of 4 mm (5/32 inch) thick, anodised aluminiumTIG-welded by hand Offering reliable underbody protection against stone chipping and collisions Oil change does not require removal of skid plate!One-piece construction "from wheel to wheel"Particularly high ground clearance thanks to millimetre-precise adjustmentEasy to fit - mounting parts and instructions includedFits BMW R1300 GS + GSA Available in black anodised or silver Specifications - Crash Bars100% designed and manufactured in the USAMade of stainless steel tube with a diameter of 31.75 mm (1.25 inch)5-axis laser cut with hand-welded TIG jointsCustomised M14 engine through bolt, heat-treated and coated to grade 8.8Available in black anodised or silver bead blastedATTENTION I: The upper ALTRIDER crash bars do NOT fit the BMW 1300 GS Adventure model!ATTENTION II: The lower ALTRIDER crash bars are NOT compatible with the upper OEM BMW crash bars! Note:Please contact us regarding the installation of the lower crash bar on the BMW R1300 GS Adventure, as special instructions are required. (???) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality ABS cylinder head guards by ALTRIDER, custom-made for the below-mentioned BMW R 1200 models. The ALTRIDER cylinder head guard is designed to protect the cylinder head from the scrapes and scratches that off-road riding often causes. ALTRIDER went to great lengths to engineer a system that distributes the load across the entire valve cover. Bolts are anchored both in front of and behind the cylinder head and hits are spread out evenly to minimize the impact force. The cylinder head guard is precision manufactured from 1/8 inch (3.2 mm) aluminum and compatible with the ALTRIDER crash bars. Each side features a replaceable CNC-machined aluminum skid pad, allowing to refresh the guards in the event of a mishap. The inside of the cylinder head guard utilize specially designed rubber pads to isolate it from the valve cover. Provided hardware makes installation a quick and simple job. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for BMW R 1200 GS LC / Adventure, R, RS and RT Fits with BMW OEM accessory crash bars and R1200 GS Adventure OE crash bars Easy installation Available in anodized black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position, regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USA Suitable for the Yamaha Tenere 700 (all years) Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 25,4 mm (1 inch) riser height available Pins provided with enlarger for enhanced grip, extras included Kit available in black or silver (please select from above) Patent Pending Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position, regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USA Components available separately or as a kit - please select from above Suitable for Yamaha XT 1200 Z Super Tenere Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 25,4 mm (1 inch) riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality fork leg guards by ALTRIDER, which are also included in the High Fender Kit for the Ducati Desert X (available separately). This article comes in very useful when the bike's original front fender is replaced by a higher one. The fork leg guards have been custom manufactured and are laser-cut from 5/64 inch (2 mm) powder-coated aluminum. They mount at three locations and include provisions for brake hose routing clips. They fit perfectly to the OEM mount points and include a hose routing. No cutting or drilling needed, ALTRIDER’s guards fit right out of the box. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Suitable for Ducati Desert X Fits with all ALTRIDER accessories Delivery includes all the necessary mounting material Available in black, white or red - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality fork leg guards by ALTRIDER, offering reliable protection for the Yamaha XT1200Z Super Tenere fork. The guards offer a comprehensive perimeter of coverage from forward impacts. A deliberately designed lower radius provides protection from side impacts as well. The interior mounting surface features a foam pad to prevent the fork leg guard from flexing and coming into contact with the fender. Installation takes only a few minutes with the provided hardware. Specifications   All ALTRIDER products are 100% designed and manufactured in the USA 1/16 inch (1.6 mm) strong aluminum construction Delivered in pairs Suitable for the Yamaha XT1200Z  Super Tenere (all model years) Delivery includes all the necessary mounting material Available in black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality Front Engine Guard by ALTRIDER, specifically designed for the BMW R1300 GS / GSA models. This engine guard in proven ALTRIDER quality offers reliable protection against impacts of all kinds. The guard is perfectly adapted to the front of the motor and covers a particularly large area thanks to its close-fitting lines.Specifications 100% designed and manufactured in the USA Made of 1/16 inch (1.9 mm) brushed stainless steel Offering reliable underbody protection against stone chipping and collisions Close fit for a better fender clearanceEasy installation - delivery includes all the necessary mounting material Easy removal with a ball stud and grommet systemFits BMW R1300 GS and GS Adventure Available in black and silver - please select from above Compatible with the ALTRIDER Skid Plate (available separately, see below) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality Front Engine Guard by ALTRIDER, specifically designed for the below-mentioned BMW models. Made of 1/16 inch (1.9 mm) brushed stainless steel, the Front Engine Guard easily mounts with a ball stud and rubber grommet system. A closer fit and larger surface area than other brands means maximum protection as well as a better clearance of the fender. Aluminum ball studs with stainless steel threads replace the OEM hardware, and rubber grommets on the guard itself allow an easy removal of the guard for cleaning after a muddy ride. Specifications 100% designed and manufactured in the USA Made of 1/16 inch (1.9 mm) brushed stainless steel Offering reliable underbody protection against stone chipping and collisions Close fit for a better fender clearance Easy removal with a ball stud and grommet system Easy installation - delivery includes all the necessary mounting material Available in black or silver - please select from above Compatible with the ALTRIDER Skid Plate (available separately, see below) Suitable for: BMW R 1250 GS BMW R 1250 GS Adventure BMW R 1250 GS Adventure HP BMW R 1250 GS Adventure Exclusive Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality clear headlight guard by ALTRIDER, suitable for BMW F 750 / 850 GS models. The front ends of the above-mentioned BMW models sports a lot of plastic work and very few easily accessible mounting points, creating a challenge when finding locations to mount a proper headlight guard. ALTRIDER engineers found a creative but practical solution to mount the headlight guard bracket to the bike, fastening it at the base of the windscreen and beneath the headlight assembly. The result is a sleek and sturdy bracket design that matches the bikes' aesthetics and still provides maximum protection to the vulnerable headlight. Constructed in the United States from laser-cut stainless steel, the mesh headlight guard mounts to four factory hard points by way of the laser-cut stainless steel mounting bracket. The quick-release system means no tools are required to remove the mesh screen for cleaning in the field. Specifications Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Extremely resistant against corrosion and weather Delivery includes the necessary mounting material Available in black powder-coated  Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality mesh headlight guard by ALTRIDER, suitable for the mentioned below Yamaha Tenere 700 models. Constructed of 1/16 inch (2 mm) laser-cut steel, this headlight guard provides total coverage for the headlight assembly without interfering with the light output. Its meticulously designed mesh pattern minimizes the loss of illumination while actually blocking any damaging debris.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets using custom-machined aluminum ball studs and rubber sockets to mount the lens to the brackets. The no-tools quick release system allows for an easy removal of the face for cleaning and the textured powder coat finish is extremely resistant to rust or weathering. Specifications 100% designed and manufactured in the USA Mesh face deflecting debris without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated  Suitable for:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Set of mounting brackets to mount the ALTRIDER Skid Plate KT13-x-1200 (available separately, see below) to the below-mentioned KTM models. Suitable for: KTM 1290 Super Adventure        2015-2016 KTM 1290 Super Adventure T     from MY 2017 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality radiator guard by ALTRIDER, suitable for the BMW R 1200 GSW Adventure, MY 2014-2017. Made from 1/16” (1.6 mm) anodized aluminum, the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris, while simultaneously directing airflow through the radiator to keep the water boxer cool. The guard is held in place using OEM hardware and the stock radiator shroud. Installation is a breeze – simply remove the three bolts holding the shroud in place, insert the guard, and reinstall the shroud. There are no spacers to deal with or hardware to add, and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 1.6 mm anodized aluminum protects radiator from dangerous debris Louvered design provides coverage without restricting airflow Simple to install with provided hardware Fits BMW 1200 GS Adventure water cooled - MY 2014-2017 Available in anodized silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality radiator guard by ALTRIDER, suitable for the BMW R 1200 GSW. Made from 1/16” (1.6 mm) anodized aluminum, the radiator guard prevents sticks and other dangers from puncturing the heart of the cooling system. Specially designed louvers deflect errant debris, while simultaneously directing airflow through the radiator to keep the water boxer cool. The guard is held in place using OEM hardware and the stock radiator shroud. Installation is a breeze – simply remove the three bolts holding the shroud in place, insert the guard, and reinstall the shroud. There are no spacers to deal with or hardware to add, and no need to remove the fairings. The perfect geometry of the guard exactly matches the contours of the shroud creating an exceptionally strong yet simple mount. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 1.6 mm anodized aluminum protects radiator from dangerous debris Louvered design provides coverage without restricting airflow Simple to install with the provided hardware Fits BMW 1200 GS water cooled Available in anodized silver or black - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage