Yamaha XT660R
High-quality front fork seal gasket set by ALL BALLS RACING including dust covers, suitable for the below-mentioned models. Specifications Improving the breakaway torque and providing up to 3x less friction than the OE parts Patented Max-Life production process, increasing the durability by 3 to 4 times Each gasket featuring 3 seals Dust covers coated with a special lubricant improving the responding qualities Suitable for: HondaCR125R 1984-1986CR250R 1982CR480R 1982Yamaha XT660 R/X 2004-2016XTZ660 1991-1995XTZ750 1989-1995YZ125 1986-1988YZ250 2T 1983-1988YZ490 1983-1990 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
BARKBUSTERS bar end mounting kit, fitting Yamaha handlebars with an internal thread. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, robust aluminium frame for the mounting of BARKBUSTERS hand guards, specifically designed for the below-mentioned motorcycle models. Specifications Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Suitable for: KTM 390 Adventure from MY 2020 Royal Enfield Himalayan from MY 2016-2021 Yamaha XT660R from MY 2004 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality steering stem nut by JMP Bolt, fitting the below-mentioned Yamaha models. Specifications Made of high-strength aircraft aluminum 60% lighter than stainless steel nuts Size: M 22 x 1 mm Available in red, blue and black anodized - please select from above Fits: Yamaha XTZ 660 - 1991-1995Yamaha XT 660 R - 2005-2016 Yamaha XT 660 X - 2005-2016 Yamaha XT 660 Z Tenere - 2008-2016 Yamaha XT 660 ZA Tenere ABS - 2012-2016 Yamaha Tenere 700 - from 2019Yamaha Tenere 700 Extreme Edition - from 2023Yamaha Tenere 700 Rally Edition - from 2021Yamaha Tenere 700 World Raid - from 2022 Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor
High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the vast majority of adventure bikes, old or new, including those with passenger grab handles and rear racks. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the four heavy-duty OS-Rings included in the delivery, which are simply exchanged for the original mountings. The four Subframe Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). Specifications Specifically designed and manufactured for the vast majority of adventure bikes Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 4 OS-Rings, 4 Subframe Loops and 2 EVA pads for an additional abrasion protectionAvailable in black10-year guarantee - learn moreBODYWORK DAMAGE DISCLAIMEREven though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle.Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
The black anodized Vario relocation converter, made of robust, CNC-machined aluminum for mounting 28 mm handlebars, allows a relocation of 50 mm, or even 60 mm with a spacer, from the original handlebar position.Maximum flexibility: Vario handlebar relocations allow for continuous forward and backward adjustment as well as variable height adjustment. The adapters thus offer the greatest possible flexibility when adjusting the steering and thus seating position. For vehicles with a 22 mm handlebar mount for mounting 28 mm handlebarsCorrosion protection thanks to black anodizingVariable handlebar riser and relocation for individual handlebar positioning by 50 mmSpacer for optional rise of an additional 10 mmModel-specific design for the best fitCNC-machined from high-strength aluminum alloy Scope of delivery 2 x Vario handlebar risers/converters2 x spacers (10 mm)Installation instructionsMounting hardware DetailsMaterial: aluminumFinish: anodizedColor: blackTotal weight: approx. 0.5 kg NoteNot approved for use in Germany under the German Road Traffic Licensing Regulations (StVZO).The length of the Bowden cables and brake lines must be checked individually. Approval informationThe ABE certificate booklet supplied with the product must always be carried when riding. This ABE is only valid for the listed models and in compliance with the information in the installation instructions. An entry in the vehicle documents is not necessary if you carry the document with you.