Yamaha XT 1200Z Super Tenere

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position, regardless of the riding position.  Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USA Components available separately or as a kit - please select from above Suitable for Yamaha XT 1200 Z Super Tenere Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 25,4 mm (1 inch) riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality fork leg guards by ALTRIDER, offering reliable protection for the Yamaha XT1200Z Super Tenere fork. The guards offer a comprehensive perimeter of coverage from forward impacts. A deliberately designed lower radius provides protection from side impacts as well. The interior mounting surface features a foam pad to prevent the fork leg guard from flexing and coming into contact with the fender. Installation takes only a few minutes with the provided hardware. Specifications   All ALTRIDER products are 100% designed and manufactured in the USA 1/16 inch (1.6 mm) strong aluminum construction Delivered in pairs Suitable for the Yamaha XT1200Z  Super Tenere (all model years) Delivery includes all the necessary mounting material Available in black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for the Yamaha XT1200Z Super Tenere. The ALTRIDER luggage rack for the Super Tenere is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. The rack comes with a mounting bracket, made from 3/16 inch (4.75 mm) anodized aluminum, which replaces the stock plastic mounting bracket and greatly increases the rack’s capacity.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. The rack may be installed in two different positions, i. e. either in the customary high position on top of the passenger seat and handles, or in a lower position without these two items. ALTRIDER’s luggage rack for the Super Tenere is compatible with the factory side cases, and is available in a clear anodized silver finish and black anodized finish. Note: This rack is not compatible with the original YAMAHA top case! Specifications All ALTRIDER products are 100% designed and manufactured in the USA Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts (available separately) and GIVI Monokey top cases Dimensions: 3 inches (7.6 cm) x 14 inches (35.6 cm) x 14 inches (35.6 cm) (H x W x D) Weight: 3 lbs (1.4 kg) Suitable for Yamaha XT1200Z Super Tenere from MY 2010 Available in black and silver - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality skid plate by the renowned US manufacturer ALTRIDER, suitable for the Yamaha Super Tenere XT1200Z. Rocks and debris are no match for this extremely robust skid plate featuring hand TIG welds and stainless hardware. Constructed of 1/8 inch (3.175 mm) powder coated aluminum, it reaches high on the left hand side to protect the stator, and provides extensive coverage of the headers on the right. The skid plate must be removed to change the oil filter. If using an aftermarket oil filter, it must be the same 2.5 inch (63.5 mm) length as the OEM one to avoid interference. However, the oil alone can be changed with the skid plate installed. Specifications All ALTRIDER products are 100% designed and manufactured in the USA Made of 1/8 inch (3.175 mm) powder coated aluminum with hand TIG welds 1/8 inch (3.175 mm) powdered coated steel hand TIG welded brackets replace the thin stamped sheet bracket to resisting bending upon impact The rear bracket is constructed from 3/16 inch (4.7625 mm) powdered coated steel and utilizes two mounting points on each side to resist pivoting upon impact Plate to be fixed on 4 OEM mounts for a better force distribution and long-term durability Various cutouts for an improved engine heat dissipation Smooth surface to facilitate sliding over obstacles Compatible with Yamaha Super Tenere XT1200Z (2010-current) Compatible with both ES and non-ES versions Available in silver and black - please select from above Note: The ALTRIDER skid plate for Yamaha Super Tenere will NOT work with the OEM Yamaha crash bars because of the interference with the crossbar on the crash bars. The skid plate will mount up, but the cross bar will have to be removed! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality BARKBUSTERS plastic handguards for the EGO-001 and EGO-005 handguard sets (available separately, see below).Spare-Part! Plastics are included in every EGO-001 and EGO-005 Mounting Kit. Specifications Delivery includes two handguards and a fastening screw kit Made of high-impact, extremely resistant plastic Curved profile, ideal for tight bush riding Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

BARKBUSTERS bar end mounting kit, fitting Yamaha handlebars with an internal thread. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (see below) Suitable for:  BMW F 700 GS E8GS (K70) from 2013 BMW F 800 GS E8GS (K72) from 2013 BMW F 800 GS Adventure E8GS (K75) from 2013 Yamaha XT1200Z Super Tenere DP01 from 2010 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the Yamaha XT1200Z / ZE from MY 2014. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (see below) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits straight handlebars with 22mm (7/8") or 25.4mm (1") diameters (please select from above). Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Note: Regarding 22mm (7/8") handlebars, installation requires 18mm of free straight handlebar space to the inside of the handlebar controls! Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits hollow handlebars. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: For 1 inch hollow handlebars, an adaptor kit will be required (available separately, code: B-074)! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits handlebars with 6mm or 8mm internal thread. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: Some Triumph models have a 5mm internal thread which must be drilled and tapped to 6mm! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality GLOBESCOUT luggage rack, specifically constructed for the below-mentioned Yamaha model. Specifications  Made of a sturdy aluminium-magnesium mixed alloy Colour: Natural anodized Suitable for: Yamaha XT1200Z Super Tenere Manufacturer YILDIZ BRONZ Ltd.Davutpaşa C. 22/5234010 Topkapı / Istanbul, TürkiyeHomepageDistributionoffroad-kontor

High-quality cast brake lever by JMP, fitting the below-mentioned Yamaha motorcycle models. Regarding shape, function and quality, JMP's cast levers come up to the respective OEM ones, being available at a much more advantageous price. Suitable for: Yamaha XT 660 Z Ténéré                 2008-2014 Yamaha XT 1200 Z Super Ténéré    2010-2014 Yamaha Ténéré 700                          from MY 2019 Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the vast majority of adventure bikes, old or new, including those with passenger grab handles and rear racks. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the four heavy-duty OS-Rings included in the delivery, which are simply exchanged for the original mountings. The four Subframe Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). Specifications Specifically designed and manufactured for the vast majority of adventure bikes Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 4 OS-Rings, 4 Subframe Loops and 2 EVA pads for an additional abrasion protectionAvailable in black10-year guarantee - learn moreBODYWORK DAMAGE DISCLAIMEREven though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle.Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Handlebar riser from ROX, suitable for 28.5 mm handlebars. 38 mm up and 25 mm backwards. Features:Made in the USA Made of high-quality 6061-T6 aluminum with a matte black anodized finishRaises the handlebars by 38 mm (1.5") up and 25 mm (1") backwards. All mounting hardware included This riser comes with (2) step washers that allow the riser to be mounted on an OEM step-down triple clamp, similar to the one used on the Honda Africa Twin. Works well with the BMW F850GS, the Honda Africa Twin, the 2021-present Triumph Trident 660, and many other motorcycles with 28.5 mm diameter handlebars. Does not fit Triumph Tiger models!!! IMPORTANT: These risers cannot be installed on motorcycles with angled (e.g., V-shaped) OEM handlebar clamps. OEM handlebar clamps must be parallel and designed for M8 bolts for this riser to install properly. Manufacturer Rox Speed FX37829 Rock Haven RoadCohasset MN, 55721, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage