KTM 950 / 990 N/S/R/SE
High-speed rear wheel bearing kit by ALL BALLS RACING, suitable for the below-mentioned KTM models. Specifications Conforms to ABEC-3 tolerance class Specially crafted lip seals that protect against dirt and water, also keeping the bearing grease clean Bearing grease containing rust protection and antioxidant, applicable for a temperature range between -29°C and 177°C Suitable for: KTM 640 LC4 2005 950 Adventure 2003-2005 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality front fork seal gasket set by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Improving the breakaway torque and providing up to 3x less friction than the OE parts Patented Max-Life production process, increasing the durability by 3 to 4 times Each gasket featuring 3 seals Suitable for:Gas-Gas EC250 12EC450FSR 09SM450FSR 09Husaberg 390FE 10-11450FC 01-05 450FE 04-11450FE-E 01-03450FS-C 01-06450FS-E 01-08450FX 10-11450FX-E 01-03550FE 07-08550FS-E 07570FE 09-11570FS 10-11650FC 04-05650FE 04-08650FS-C 04-08650FS-E 04-08FE250 13-14FE350 13-14FE450 14FE501 13-14TE250 11-14TE300 11-14HusqvarnaFC 250 (EURO) 15FC 450 (EURO) 15FE 250 14-16FE 350 14-21FE 350s 15-21FE 450 14FE 501 14-15FE 501s 15-16FX 350 17-22TC 125 14-17TC 250 14-16TE 125 15-16TE 250 14-16TE 300 14-16 KTMAdventure 640 01-07Adventure 950 04-06Adventure 990 07-13Enduro 690 08Enduro R 690 09-14EXC 125 03-09EXC 200 03-05EXC 250 03-05EXC 300 03-05EXC 450 03-14EXC 500 12-15EXC 525 03-07EXC 530 09-11EXC-F 350 12-15EXC-R 450 08EXC-R 530 08LC4 640 05Rallye 660 01-05Rallye 660 Factory Replica 06-07Rallye 690 Factory Replica 08-09Super Enduro 950 07SX 125 03-16SX 144 07-08SX 150 09-16SX 200 03-04SX 250 03-16SX 450 03-06SX 525 03-06SXC 625 05SX-F 250 05-16SX-F 250 Factory Edition 15SX-F 350 11-16SX-F 450 07-16SX-F 450 Factory Edition 15SX-F 505 08TriumphTiger Explorer 1200 XC/XCA/XCX/XR/XRT/XRX 2016 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality front fork Dust Cover set by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Dust covers coated with a special lubricant improving the responding qualities Suitable for: Gas-Gas with Oehlins EC125 2003-2008 EC200 2003-2008 EC250 2003-2008 EC300 2003-2008 EC450FSE 2003-2006 EC450FSR 2007-2008 Husaberg 390FE 2010-2011 450FC 2001-2005 450FE 2004-2011 450FE-E 2001-2003 450FS-C 2001-2006 450FS-E 2001-2008 450FX 2010-2011 450FX-E 2001-2003 550FE 2007-2008 550FS-E MY 2007 570FE 2009-2011 570FS 2010-2011 650FC 2004-2005 650FE 2004-2008 650FS-C 2004-2008 650FS-E 2004-2008 FE250 2013-2014 FE350 2013-2014 FE450 MY 2014 FE501 2013-2014 TE250 2011-2014 TE300 2011-2014 Husqvarna FC 250 (EURO) MY 2015 FC 250 2014-2016 FC 350 2014-2016 FC 450 (EURO) MY 2015 FC 450 2014-2016 FE 250 2014-2016 FE 350 2014-2016 FE 350S 2015-2016 FE 450 MY 2014 FE 501 2014-2015 FE 501S 2015-2016 TC 125 2014-2016 TC250 2014-2016 TE 125 2015-2016 TE 300 2014-2016 TE250 2014-2016 KTM EXC 125 2002-2009 EXC 200 2002-2005 EXC 250 2002-2005 EXC 300 2002-2005 EXC 450 2002-2014 EXC 500 2012-2015 EXC 525 2003-2007 EXC 530 2010-2011 EXC-F 350 2012-2015 EXC-R 450 MY 2008 EXC-R 530 2008-2009 SX 125 2002-2016 SX 144 2007-2008 SX 150 2009-2016 SX 200 2003-2004 SX 250 2002-2016 SX 380 MY 2002 SX 400 MY 2002 SX 450 2003-2006 SX 520 MY 2002 SX 525 2003-2006 SXC 625 MY 2005 SX-F 250 2005-2016 SX-F 350 2011-2016 SX-F 450 2007-2016 SX-F 505 MY 2008 640 Adventure 2001-2007 660 RALLY FACTORY REPL. 2006-2007 660 RALLYE 2001-2005 690 Enduro + R 2009-2014 690 RALLY FACTORY REPL. 2008-2009 950/990 all 2003-2013 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality, oversized billet foot pegs by the US manufacturer ALTRIDER, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. For further information, please see below. Specifications Precision-made of heavy duty, high-quality 6061-T6 billet aluminum Tread area size: 2,28" x 4,8" (58 mm x 122 mm) - depth x width Surface equipped with several screwed pins for a maximum grip and braking sensation Specifically designed to prevent most dirt and mud from clinging to the pegs Delivery includes 2 uprated springs and all the necessary mounting material Available in black anodised Suitable for: Husqvarna Husqvarna Norden 901 (2022+) Husqvarna 701 (2016+) KTM KTM 690 Enduro R (2008+) KTM 790 ADV S / R (2019-2020) KTM 890 ADV R (2021+) KTM 950 Adventure (2003-2006) KTM 990 Adventure (2006-2012) KTM 1090 Adventure R / S KTM 1290 S Adventure S KTM 1290 Super Adventure R / S / T KTM 125 EXC / SX (1998-2016) KTM 150 SX / XC (2010-2016) KTM 200 EXC / XC-W (2006-2016) KTM 250 EXC / SX / XC / XCF-W (2006-2016) KTM 300 EXC / XC (2006-2016) KTM 350 EXC-F / SX-F / XCF-W (2012-2016) KTM 400 EXC (2009-2011) KTM 450 EXC / SX-F / XC-W (2009-2016) KTM 500 EXC / XC-W (2012-2016) KTM 530 EXC / XC-W (2009-2011) KTM 990 Supermoto R / T (2013) KTM Freeride 250 F / R (2015-2016) KTM Freeride 350 (2012-2016) KTM Freeride E-XC (2015-2016) Yamaha Yamaha Tenere 700 (2019+) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications 100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25.4 mm riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Replaces KTM, Husqvarna, and Husaberg OEM part numbers: 60013051000, 54813951000, 81213951000, 54813051100 and 54813051000 Suitable for:GASGAS ES 700 EnduroHusqvarna125-501ccm TC/TE Austria701 Enduro 901 NordenKTM125-640ccm EXC/SX/SXC390 Adventure690 Enduro / R790 Adventure / R890 Adventure / R950 Adventure N/R/S990 Adventure N/R/S1050 Adventure1090 Adventure / R1190 Adventure / R 1290 Super Adventure N/R/S/TFor a list with further models please click here Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden Spacer 7mm B-090 KTM 790 Adventure/R Spacer 10mm B-078 KTM 890 Adventure/R Spacer 10mm B-078 KTM 1190 Adventure/R Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020 Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality and robust handguard by BARKBUSTERS's, specifically designed for trail and enduro riders. Specifications Featuring strong, heat-treated aluminium backbones for maximum strength Ergonomic drop-down design of the backbone, ideal for bikes with long levers One pair of highly impact-resistant plastic guards included, offering reliable protection from hard dirt etc. Also included: Three axis mounting clamps for easy installation and mounting hardware to fit tapered 28,5mm handlebars Available in various different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits straight handlebars with 22mm (7/8") or 25.4mm (1") diameters (please select from above). Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Note: Regarding 22mm (7/8") handlebars, installation requires 18mm of free straight handlebar space to the inside of the handlebar controls! Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits hollow handlebars. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: For 1 inch hollow handlebars, an adaptor kit will be required (available separately, code: B-074)! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits handlebars with 6mm or 8mm internal thread. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: Some Triumph models have a 5mm internal thread which must be drilled and tapped to 6mm! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality VPS open ended MX handguard set by BARKBUSTERS. Specifications Single point mount (open ended) design, suitable for motocross and enduro bikes Including alloy handlebar clamps with high-strength nylon brackets Universal design - allows for plenty of adjustment in most directions Delivery includes 1 set of highly impact-resistant VPS plastic guards, available in various different colours (please select from above) For added protection, incorporate a variable-height BARKBUSTERS Wind Deflector Set (sold separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Delivery includes 1 piece! High-quality pivot mirror by FAR. Ideal for off-road biking as it easily folds to the middle, thus avoiding any damage. FAR is OEM for KTM and Husqvarna (amongst others). Specifications Fits both sides M10 x 1,25 right hand thread 4.5" (11.5 cm) diameter Street-legal by E-number Length from pivot to mirror edge app. 5" (125mm) Manufacturer FAR s.r.l.Via C. Masetti, 12/A 40127 Zola Predosa (Bologna), ItalyHomepageDistributionoffroad-kontor
Drop-forged brake lever by JMP, suitable for various KTM motorcycle models (see below). Made of the high-quality, extremely dense 6061-T6 aluminum alloy, this item is more flexible and break-proof than commonly sold levers produced by injection moulding. Suitable for: KTM 640 Adventure 2004-2007 KTM 950 Adventure N/S 2003-2005 KTM 990 Adventure S/N/R 2006-2014 also ABS models Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor
Replacement choke cable by JMT, suitable for various KTM motorcycle models (see below). Suitable for: KTM 950 Adventure N 2003-2005 KTM 950 Adventure S 2003-2005 KTM 950 R Super Enduro 2006-2008 KTM 950 Super Moto +R 2006-2008 Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor