KTM 1190 Adventure / R
High-quality, oversized billet foot pegs by the US manufacturer ALTRIDER, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. For further information, please see below. Specifications Precision-made of heavy duty, high-quality 6061-T6 billet aluminum Tread area size: 2,28" x 4,8" (58 mm x 122 mm) - depth x width Surface equipped with several screwed pins for a maximum grip and braking sensation Specifically designed to prevent most dirt and mud from clinging to the pegs Delivery includes 2 uprated springs and all the necessary mounting material Available in black anodised Suitable for: Husqvarna Husqvarna Norden 901 (2022+) Husqvarna 701 (2016+) KTM KTM 690 Enduro R (2008+) KTM 790 ADV S / R (2019-2020) KTM 890 ADV R (2021+) KTM 950 Adventure (2003-2006) KTM 990 Adventure (2006-2012) KTM 1090 Adventure R / S KTM 1290 S Adventure S KTM 1290 Super Adventure R / S / T KTM 125 EXC / SX (1998-2016) KTM 150 SX / XC (2010-2016) KTM 200 EXC / XC-W (2006-2016) KTM 250 EXC / SX / XC / XCF-W (2006-2016) KTM 300 EXC / XC (2006-2016) KTM 350 EXC-F / SX-F / XCF-W (2012-2016) KTM 400 EXC (2009-2011) KTM 450 EXC / SX-F / XC-W (2009-2016) KTM 500 EXC / XC-W (2012-2016) KTM 530 EXC / XC-W (2009-2011) KTM 990 Supermoto R / T (2013) KTM Freeride 250 F / R (2015-2016) KTM Freeride 350 (2012-2016) KTM Freeride E-XC (2015-2016) Yamaha Yamaha Tenere 700 (2019+) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications 100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality clutch side engine case cover by ALTRIDER, suitable for the below-mentioned KTM Adventure models. The OEM engine case on the KTM Adventure/R and SA models is made from a thin-walled cast aluminum. This choice helps to save overall weight, but also creates a weak point on a vital piece of the engine. If the KTM Adventure/R and SA models are laid down on their right sides, there is a real danger of the engine case becoming damaged by large debris or even from the brake lever tip bending into it, potentially bursting into the case. Compared to several competitor options made from molded plastic, ALTRIDER created an engine case cover made from a single piece of 3.2 mm aluminum. This exceptionally strong 6061-TG6 aluminum alloy has a tensile strength of at least 42,000 psi (300 MPa) and yield strength of at least 35,000 psi 241 MPa. Rubber backers spread the load of impact, as well as allow the cover to maintain a low profile. Flush stainless steel fasteners and a deburred product prevent scuffing up the rider's boots and pants. The design of the case cover also incorporates the ingenuity of the ALTRIDER Brake Lever Shield, preventing unwanted and unexpected early braking. The close design of the OEM brake lever creates early interference with the rider's boot during braking. This is unique to the KTM Adventure/R and SA models as KTM worked hard to make the large displacement engine still feel narrow, which in turn provided little options for routing the rear brake lever. The lever arm extends into the rider boot area above the brake tip, thus creating earlier-than-expected braking. An outward flange on the ALTRIDER Engine Case Cover prevents accidental engagement of the brake arm while still providing a surface to properly hug the bike with the boot, all without interrupting any feel or ergonomics. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Protects engine case from damage caused by debris or rear brake lever Prevents accidental engagement of rear brake Easy installation with flush mount hardware Deburred to prevent snagged or caught clothing Made of 3.2 mm (1/8 in.) aluminum Available in black Suitable for KTM 1050 1090 1190 Adventure/R and 1290 SA Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25.4 mm riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Replaces KTM, Husqvarna, and Husaberg OEM part numbers: 60013051000, 54813951000, 81213951000, 54813051100 and 54813051000 Suitable for:GASGAS ES 700 EnduroHusqvarna125-501ccm TC/TE Austria701 Enduro 901 NordenKTM125-640ccm EXC/SX/SXC390 Adventure690 Enduro / R790 Adventure / R890 Adventure / R950 Adventure N/R/S990 Adventure N/R/S1050 Adventure1090 Adventure / R1190 Adventure / R 1290 Super Adventure N/R/S/TFor a list with further models please click here Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
This unique ALTRIDER luggage rack for the KTM Adventure-models can be mounted in multiple positions to suit most luggage needs. Bolt it directly to the factory rack to create a larger, more versatile platform for any gear. The rack can also replace the OEM rack, bringing the load and center of gravity closer to the ground. Finally, the luggage rack can be mounted without the factory rack or passenger grab handles – allowing to combine it with the ALTRIDER pillion rack to create a flat, continuous luggage surface. All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL -fuel packs. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. Hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing strength. Learn more about how ALTRIDER luggage racks are developed in our blog post Hooked: How We Developed Our Luggage Racks. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Luggage rack can be mounted in multiple configurations Strategically placed cutouts provide ample mounting points without sacrificing strength Completely smooth luggage surface 3/16” (4.8 mm) laser-cut anodized aluminum Interfaces with ROTOPAX and OVERLAND FUEL fuel packs Available in silver or black Suitable for: Husqvarna Norden 901 KTM 790 Adventure/R 890 Adventure L/R 1050 Adventure 1090 Adventure/R 1190 Adventure/R 1290 Super Adventure R-S-T Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality side stand foot enlarger by ALTRIDER, suitable for the below-mentioned KTM Adventure models. Featuring a completely new 3 piece design, the ALTRIDER side stand foot fully surrounds the stand, preventing it from coming loose no matter how rough the ride. The ‘fingers’ of the upper ring grip the top of the pad, while allowing a small amount of flexibility to account for any variation in the weld bead. Button-top hex screws and provided Loctite fasten the 3 components together - ensuring a firm grip for worry-free riding. The stout bottom plate gives the hardware plenty of material to bite, preventing anything from rattling loose. A 3D design allows easy deployment of the side stand even while wearing boots. The side stand foot is constructed from durable stainless steel, and is available in raw silver or powder coat black. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA 3-piece design ensures fully secure fit 3D tread design allows easy deployment with riding boots Stainless steel construction extremely resistant to rust and weathering Available in black Suitable for: KTM 790 Adventure/R KTM 1050 Adventure KTM 1090 Adventure KTM 1190 Adventure/R MY 2014 and up KTM 1290 Super Adventure R/S/T Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden Spacer 7mm B-090 KTM 790 Adventure/R Spacer 10mm B-078 KTM 890 Adventure/R Spacer 10mm B-078 KTM 1190 Adventure/R Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020 Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality kit by BARKBUSTERS, made for use with backbone-kits in order to ensure the necessary space / clearance between the clamp or backbone and any nearby components. Available in 3 different sizes (see below). Please select from the following sizes: 1 x 7mm spacer - 1 x bolt M8 x 35 mm 1 x 10mm spacer - 1 x bolt M8 x 35 mm 1 x 20mm spacer - 1 x bolt M8 x 45 mm 1 x 30mm spacer - 1 x bolt M8 x 55 mm Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality VPS open ended MX handguard set by BARKBUSTERS. Specifications Single point mount (open ended) design, suitable for motocross and enduro bikes Including alloy handlebar clamps with high-strength nylon brackets Universal design - allows for plenty of adjustment in most directions Delivery includes 1 set of highly impact-resistant VPS plastic guards, available in various different colours (please select from above) For added protection, incorporate a variable-height BARKBUSTERS Wind Deflector Set (sold separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Delivery includes 1 piece! High-quality pivot mirror by FAR. Ideal for off-road biking as it easily folds to the middle, thus avoiding any damage. FAR is OEM for KTM and Husqvarna (amongst others). Specifications Fits both sides M10 x 1,25 right hand thread 4.5" (11.5 cm) diameter Street-legal by E-number Length from pivot to mirror edge app. 5" (125mm) Manufacturer FAR s.r.l.Via C. Masetti, 12/A 40127 Zola Predosa (Bologna), ItalyHomepageDistributionoffroad-kontor
Uniquely designed low-profile fasteners by KRIEGA, fitting the original rear racks of the KTM 1090, 1190 and 1290 Adventure models to create 4 hook points for mounting any KRIEGA US- or OS-Tailpack from 5 to 30 litres (available separately, see below). Specifications Made of tough, lightweight T6 alloy - only 25 g per loop Also perfect for mounting roll-top bags and tents using KRIEGA Cam Straps or OS-Cam Straps (available separately) Easy fit - no drilling required 19mm nylon loops Delivery includes 4 fasteners with matching nylon washers 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
Handlebar riser from ROX, suitable for 28.5 mm handlebars. 38 mm up and 25 mm backwards. Features:Made in the USA Made of high-quality 6061-T6 aluminum with a matte black anodized finishRaises the handlebars by 38 mm (1.5") up and 25 mm (1") backwards. All mounting hardware included This riser comes with (2) step washers that allow the riser to be mounted on an OEM step-down triple clamp, similar to the one used on the Honda Africa Twin. Works well with the BMW F850GS, the Honda Africa Twin, the 2021-present Triumph Trident 660, and many other motorcycles with 28.5 mm diameter handlebars. Does not fit Triumph Tiger models!!! IMPORTANT: These risers cannot be installed on motorcycles with angled (e.g., V-shaped) OEM handlebar clamps. OEM handlebar clamps must be parallel and designed for M8 bolts for this riser to install properly. Manufacturer Rox Speed FX37829 Rock Haven RoadCohasset MN, 55721, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Lifetime Warranty Made in the USA 2" (51mm) Center-to-Center Rise Pivots Backward/Forward based on Rider Preference 1 1/8" Stem (28mm) Accepts 1 1/8" Handlebar (28mm) Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers! These risers will mount on virtually any machine that has a solid 1 1/8" tubular handlebar and open mounting area. NOT APPROVED for use on bikes with clip-on style handlebars. Full range of adjustment allows the rider to find their own individual bar position. Designed, Manufactured, and Assembled in the USA. Make your machine fit YOU, not the other way around. A more comfortable ride means a longer ride—and who doesn’t want that? Patented by the US Patent and Trademark Office under US Patent #6,920,806. Fitment These risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has open mounting area, and has enough cable slack to accomodate the risers. Here is a partial list of all the machines these risers will mount on. BMW: R1200GS (2012-older), R1200R (2014-older), rNineT, S1000R, F800GT, S1000R Ducati: Hypermotard, Multistrada (2010-newer) Honda: CTX700, CTX1300, Africa Twin Kawasaki: Z1000 KTM: 250, 300XC, 350EXC/XC/SX, 450EXC/SX/XC, 500EXC/XC, 690 E/R, 990 Adv/Baja/Super Enduro, 1190 ADV, 1290 Super ADV Moto Guzzi: Stelvio 1200 Triumph: Speed Triple (2008-newer), Tiger 800 XC / XCS (2011-newer), Tiger 800 Street/Roadie (2011-newer), Tiger 1200 Explorer Yamaha: Vmax, FJ09, Super Tenere (2013-older; (2014 and newer Super T's need the 1R-P2PPS10A riser) and many many more… Manufacturer Rox Speed FX37829 Rock Haven RoadCohasset MN, 55721, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality pannier carrier set by SHAD made of steel round pipe, custom-made for the below-mentioned KTM models.The carriers are suitable for attaching the SHAD TERRA side cases and are also compatible with the SH35 and SH36 cases, as well as with the TR30 and TR40 soft panniers (available separately from us).Specifications Delivered in pairs (right & left side)Robust steel structure, powder-coated by high-density metallic paintPipe diameter: 20 mmReinforced with a crossbar for maximum strength and durability, even in extreme off-road conditions Recommended load: 10 kgs per carrier Delivery includes mounting material and instructions Available in black Carriers do not require any ABE (German general operating licence) or special registration Fits: KTM 1050 Adventure 2014-2016KTM 1090 Adventure / R 2014-2019KTM 1190 Adventure / R 2014-2016KTM 1290 Super Adventure R/S/T 2014-2020 Manufacturer NAD, S.L.Carrer Octave Lecante 2 08100 Mollet del Vallès, Barcelona, SpainHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
The black anodized Vario relocation converter, made of robust, CNC-machined aluminum for mounting 28 mm handlebars, allows a relocation of 50 mm, or even 60 mm with a spacer, from the original handlebar position.Maximum flexibility: Vario handlebar relocations allow for continuous forward and backward adjustment as well as variable height adjustment. The adapters thus offer the greatest possible flexibility when adjusting the steering and thus seating position. For vehicles with a 22 mm handlebar mount for mounting 28 mm handlebarsCorrosion protection thanks to black anodizingVariable handlebar riser and relocation for individual handlebar positioning by 50 mmSpacer for optional rise of an additional 10 mmModel-specific design for the best fitCNC-machined from high-strength aluminum alloy Scope of delivery 2 x Vario handlebar risers/converters2 x spacers (10 mm)Installation instructionsMounting hardware DetailsMaterial: aluminumFinish: anodizedColor: blackTotal weight: approx. 0.5 kg NoteNot approved for use in Germany under the German Road Traffic Licensing Regulations (StVZO).The length of the Bowden cables and brake lines must be checked individually. Approval informationThe ABE certificate booklet supplied with the product must always be carried when riding. This ABE is only valid for the listed models and in compliance with the information in the installation instructions. An entry in the vehicle documents is not necessary if you carry the document with you.