Husqvarna FE / TE Austria
High-quality front fork seal gasket set by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Improving the breakaway torque and providing up to 3x less friction than the OE parts Patented Max-Life production process, increasing the durability by 3 to 4 times Each gasket featuring 3 seals Suitable for:Gas-Gas EC250 12EC450FSR 09SM450FSR 09Husaberg 390FE 10-11450FC 01-05 450FE 04-11450FE-E 01-03450FS-C 01-06450FS-E 01-08450FX 10-11450FX-E 01-03550FE 07-08550FS-E 07570FE 09-11570FS 10-11650FC 04-05650FE 04-08650FS-C 04-08650FS-E 04-08FE250 13-14FE350 13-14FE450 14FE501 13-14TE250 11-14TE300 11-14HusqvarnaFC 250 (EURO) 15FC 450 (EURO) 15FE 250 14-16FE 350 14-21FE 350s 15-21FE 450 14FE 501 14-15FE 501s 15-16FX 350 17-22TC 125 14-17TC 250 14-16TE 125 15-16TE 250 14-16TE 300 14-16 KTMAdventure 640 01-07Adventure 950 04-06Adventure 990 07-13Enduro 690 08Enduro R 690 09-14EXC 125 03-09EXC 200 03-05EXC 250 03-05EXC 300 03-05EXC 450 03-14EXC 500 12-15EXC 525 03-07EXC 530 09-11EXC-F 350 12-15EXC-R 450 08EXC-R 530 08LC4 640 05Rallye 660 01-05Rallye 660 Factory Replica 06-07Rallye 690 Factory Replica 08-09Super Enduro 950 07SX 125 03-16SX 144 07-08SX 150 09-16SX 200 03-04SX 250 03-16SX 450 03-06SX 525 03-06SXC 625 05SX-F 250 05-16SX-F 250 Factory Edition 15SX-F 350 11-16SX-F 450 07-16SX-F 450 Factory Edition 15SX-F 505 08TriumphTiger Explorer 1200 XC/XCA/XCX/XR/XRT/XRX 2016 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality front fork Dust Cover set by ALL BALLS RACING, suitable for the below-mentioned models. Specifications Dust covers coated with a special lubricant improving the responding qualities Suitable for: Gas-Gas with Oehlins EC125 2003-2008 EC200 2003-2008 EC250 2003-2008 EC300 2003-2008 EC450FSE 2003-2006 EC450FSR 2007-2008 Husaberg 390FE 2010-2011 450FC 2001-2005 450FE 2004-2011 450FE-E 2001-2003 450FS-C 2001-2006 450FS-E 2001-2008 450FX 2010-2011 450FX-E 2001-2003 550FE 2007-2008 550FS-E MY 2007 570FE 2009-2011 570FS 2010-2011 650FC 2004-2005 650FE 2004-2008 650FS-C 2004-2008 650FS-E 2004-2008 FE250 2013-2014 FE350 2013-2014 FE450 MY 2014 FE501 2013-2014 TE250 2011-2014 TE300 2011-2014 Husqvarna FC 250 (EURO) MY 2015 FC 250 2014-2016 FC 350 2014-2016 FC 450 (EURO) MY 2015 FC 450 2014-2016 FE 250 2014-2016 FE 350 2014-2016 FE 350S 2015-2016 FE 450 MY 2014 FE 501 2014-2015 FE 501S 2015-2016 TC 125 2014-2016 TC250 2014-2016 TE 125 2015-2016 TE 300 2014-2016 TE250 2014-2016 KTM EXC 125 2002-2009 EXC 200 2002-2005 EXC 250 2002-2005 EXC 300 2002-2005 EXC 450 2002-2014 EXC 500 2012-2015 EXC 525 2003-2007 EXC 530 2010-2011 EXC-F 350 2012-2015 EXC-R 450 MY 2008 EXC-R 530 2008-2009 SX 125 2002-2016 SX 144 2007-2008 SX 150 2009-2016 SX 200 2003-2004 SX 250 2002-2016 SX 380 MY 2002 SX 400 MY 2002 SX 450 2003-2006 SX 520 MY 2002 SX 525 2003-2006 SXC 625 MY 2005 SX-F 250 2005-2016 SX-F 350 2011-2016 SX-F 450 2007-2016 SX-F 505 MY 2008 640 Adventure 2001-2007 660 RALLY FACTORY REPL. 2006-2007 660 RALLYE 2001-2005 690 Enduro + R 2009-2014 690 RALLY FACTORY REPL. 2008-2009 950/990 all 2003-2013 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25.4 mm riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Replaces KTM, Husqvarna, and Husaberg OEM part numbers: 60013051000, 54813951000, 81213951000, 54813051100 and 54813051000 Suitable for:GASGAS ES 700 EnduroHusqvarna125-501ccm TC/TE Austria701 Enduro 901 NordenKTM125-640ccm EXC/SX/SXC390 Adventure690 Enduro / R790 Adventure / R890 Adventure / R950 Adventure N/R/S990 Adventure N/R/S1050 Adventure1090 Adventure / R1190 Adventure / R 1290 Super Adventure N/R/S/TFor a list with further models please click here Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden Spacer 7mm B-090 KTM 790 Adventure/R Spacer 10mm B-078 KTM 890 Adventure/R Spacer 10mm B-078 KTM 1190 Adventure/R Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020 Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, tough MX handguard set by BARKBUSTERS, including 2 premium EGO plastic guards. Specifications Delivered in pairs (L/R) Designed for Enduro and Trail bikes To fit straight 22mm (7/8″) handlebar Two mounting points secure the full wrap around aluminium design Compact curved profile ideal for tight bush riding Heat treated aluminium backbone for maximum strength Replaceable, high impact resistant EGO plastic guards included Large range of colours matched to popular motorcycle brands NOTE: 28.5mm straight section handlebars such as Renthal Twin Wall and Barkbusters VSBar require an additional 28.5mm clamp saddle set, code: BSS-00 (sold separately, see below) Set not ideal for bikes with long clutch and brake levers! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, tough handguard set with aluminium backbone by BARKBUSTERS, including 2 premium EGO plastic guards and mounting kit. Specifications Delivered in pairs (L/R) Designed for Enduro and trail bikes Two mounting points secure the full wrap-around aluminium design Compact curved profile, ideal for tight off-road riding Heat-treated aluminium backbone for maximum strength Replaceable, highly impact-resistant EGO plastic guards included The legendary EGO has proven to be one of the world's toughest and most durable handguards Mounting kit for fixing to tapered 28.5mm oversize bars included Easy installation Large range of colours available, matched to popular motorcycle brands - please select from above Note: NOT ideal for bikes with long clutch and brake levers! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality and robust handguard by BARKBUSTERS's, specifically designed for trail and enduro riders. Specifications Featuring strong, heat-treated aluminium backbones for maximum strength Ergonomic drop-down design of the backbone, ideal for bikes with long levers One pair of highly impact-resistant plastic guards included, offering reliable protection from hard dirt etc. Also included: Three axis mounting clamps for easy installation and mounting hardware to fit tapered 28,5mm handlebars Available in various different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits straight handlebars with 22mm (7/8") or 25.4mm (1") diameters (please select from above). Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Note: Regarding 22mm (7/8") handlebars, installation requires 18mm of free straight handlebar space to the inside of the handlebar controls! Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits hollow handlebars. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: For 1 inch hollow handlebars, an adaptor kit will be required (available separately, code: B-074)! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality STORM hand guard set by BARKBUSTERS providing excellent protection from the elements. Fits handlebars with 6mm or 8mm internal thread. Specifications Delivery includes two STORM hand guards and the corresponding aluminium frames and locking caps to secure the hand guards in place Mounted to a single point on the handlebar ends using a unique internal locking system Easy installation Provides excellent wind and cold weather protection Available in black NOT designed for impact protection - if this is required, choose from the BARKBUSTERS two point mount options (available separately) Note: Some Triumph models have a 5mm internal thread which must be drilled and tapped to 6mm! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the latest lightweight enduro bikes without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two OS-Dirtbike rings included in the delivery, which are simply exchanged for the original mountings. The four OS-Rack Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). In addition, combined with the additional loops of the OS-Base, the a. m. OS-Rack Loops offer various mounting options for up to three bags. The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. The silicone heat shield also included in the delivery provides a safe barrier from the exhaust. It simply mounts to the silencer using the two zip-ties provided. Specifications Specifically designed and manufactured for the latest lightweight Enduro bikes Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 OS-Dirtbike rings, 4 OS-Rack Loops and 1 silicone heat shieldAvailable in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned KTM, Husaberg and Husqvarna models. Specifications Made in the USA Machined in one piece from a 1.25" thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Available in the following colours and 2 different fittings (see below) - please select from above: Black anodised Orange anodised 20mm axle fits: Husaberg 125-570 2009-2014 Husqvarna FE/TE 125-501 2014-2023 Husqvarna FC/TC 125-450 2014-2015 KTM 125-530 EXC/EXC-F/SX/SX-F 2004-2012 KTM 125-450 XC-W, XCF-W, EXC, EXC-F, 6 Days 2013-2023 25mm axle fits: Husqvarna FC/TC/FX/TX 125-450 2016-2022 KTM 125-450 SX,SXF,EXC,EXC-F 2013-2022 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
Premium O-Ring chain by WRP, specifically designed and manufactured for off-road biking. Specifications Open chain with 120 links Made in Italy by Regina Material: tough, heat-treated steel Offering superior strength and excellent wear resistance 33.000 N tenacity Gold outer finish and chromed bearing pins to resist corrosion and to extend chain life Low-friction O-rings for oil sealing as well as maximum performance and durability Delivery includes 1 rivet and 1 spring connecting link Manufacturer WIND TRADING SRLVia Dismano 114/G48124 Ravenna RA, ItalyHomepageDistributionJochen Bader MotorsportSchottstrasse 13 73084 SalachGermanyHomepage
Flex clutch lever by ZAP made of high-grade aluminium, suitable for the below-mentioned KTM models with BREMBO clutch mounting. Specifications CNC-machined and forged from tough aluminium Fits BREMBO clutch mounting Available in black anodised Suitable for:BetaRR 125 2T 20-24RR 125 4T 13-24RR 200 20-24RR 250 2T 13-24RR 250 4T 13-24RR 300 13-24RR 350 13-14RR 350 EFI 15-24RR 390 15-24RR 400 12-14RR 430 15-24RR 450 12-14RR 480 15-24RR 498 12-14RR 520 13-14GAS GASMC 125 21-23MC 250 22-23MC 250 F 21-23MC 350 F 22-23MC 450 F 21-23RX 450 F 23-24HusabergFE 250 13-14FE 350 13-14FE 450 13-14FE 501 13-14TE 250 11-14TE 300 11-14HusqvarnaFC 250 14-24FC 350 14-24FC 450 14-24FE 250 14-16FE 350 14-16FE 450 14-16FE 501 14-16FR 450 Rally 17-24FS 450 15-24TC 125 22-24TC 250 10-24TC 410 10-13TE 250 14-16TE 300 14-16TE 350 10-13KTM125 SX 16-24125 XC-W 17-19150 EXC 20-24150 SX 16-22250 EXC 06-24250 EXC-F 07-24250 SX 06-24250 SX-F 06-24300 EXC 06-24300 SX 23-24350 EXC-F 12-24350 SX-F 11-24400 EXC-R 09-11450 EXC-F 12-24450 EXC-R 08-11450 Rally Factory 15-24450 SMR 13-24450 SX-F 13-24500 EXC-F 12-24530 EXC-R 08-11Sherco125 SE 18-24250 SE 14-24250 SEF 14-24300 SE 14-24300 SEF 14-24450 SEF 14-24500 SEF 19-24TM-RacingEN 125 10-24EN 144 10-24EN 250 10-24EN 250 F 10-24EN 300 10-24EN 300 F 17-24EN 450 F 10-24EN 530 F 10-24MX 125 10-24MX 144 10-24MX 250 10-24MX 250 F 10-24MX 300 10-24MX 450 F 10-24MX 530 F 10-24 Manufacturer ZAP TechniX GmbHWaldecker Str. 8 99444 Blankenhain, GermanyHomepageDistributionoffroad-kontor
Flex clutch lever by ZAP made of high-grade aluminium, suitable for the below-mentioned KTM models with MAGURA clutch mounting. Specifications CNC-machined and forged from tough aluminium Fits MAGURA clutch mounting Available in orange or black anodised - please select from above Suitable for: HusabergFE 390 10-12FE 450 09-12FE 570 09-12FS 570 10-11FX 450 10-11TE 125 12-14HusqvarnaFC 250 16-21FC 350 16-21FC 450 16-21FE 250 17-21FE 350 17-21FE 450 17-21FE 501 17-21FS 450 16-21TC 125 14-21TC 250 17-21TE 125 14-16TE 150 20-21TE 250 17-21TE 300 17-21TX 125 17-19KTM125 EXC 09-16125 SX 09-15150 SX 09-15200 EXC 09-16450 SX-F 09-12505 SX-F 2009 Manufacturer ZAP TechniX GmbHWaldecker Str. 8 99444 Blankenhain, GermanyHomepageDistributionoffroad-kontor