GasGas ES / SM 700
High-quality, adjustable side stand by ALTRIDER, custom-made for the models mentioned below. The ALTRIDER Adjustable Side Stand is the only side stand works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USA Adjustable height settings, including factory height, 0.5 inch (1.3 cm) longer than factory, or 1.5 inch (3.8 cm) shorter than factory Foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot (+20%), preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Fits: KTM 690 Enduro Husqvarna 701 Enduro GasGas ES 700 Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original KTM cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications 100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. Enlarger The ever-changing terrain of off-road riding means the rider's entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model, ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications Stainless steel bottom plate and hardware to endure the abrasions of off-road riding 100% designed and manufactured in the USA 25.4 mm riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Replaces KTM, Husqvarna, and Husaberg OEM part numbers: 60013051000, 54813951000, 81213951000, 54813051100 and 54813051000 Suitable for:GASGAS ES 700 EnduroHusqvarna125-501ccm TC/TE Austria701 Enduro 901 NordenKTM125-640ccm EXC/SX/SXC390 Adventure690 Enduro / R790 Adventure / R890 Adventure / R950 Adventure N/R/S990 Adventure N/R/S1050 Adventure1090 Adventure / R1190 Adventure / R 1290 Super Adventure N/R/S/TFor a list with further models please click here Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality suspension lowering linkage by ALTRIDER, tailor-made for the below-mentioned motorcycle models. ALTRIDER presents the only linkage on the market with an integrated plastic protection which does not transmit any shocks like other rigid protection devices and does not stick to the linkage like aluminium. This highly robust and durable linkage is used to adjust the suspension in order to lower the seat height. The seat can be lowered by 38 mm (1,5 inches) regarding the models up to MY 2018 or by 32 mm (1.25 inches) regarding the models from MY 2019, both in comparison with the factory height. Lowering the seat is recommended to make it easier and more comfortable to place both feet on the ground when stopping on uneven terrain or for more safety in traffic, i. e. generally to ensure a stable standing. In combination with the innovative Adjustable Aluminum Side Stand by ALTRIDER for KTM 690 Enduro / Husqvarna 701 / GasGas 700 (available separately, see below), the ALTRIDER height suspension linkage always provides reliable support, regardless of how the suspension height is set. Specifications Designed and manufactured in the USA Made from precision CNC machined billet aluminum with aircraft quality anodized finish Needle bearings with integrated dust seals to provide OEM level ingress protection Robust 6mm thick UHMW integrated linkage guard to protect the lower shock mount (removable with 3x M6 flush mounted fasteners) Available in anodized grey Fits:KTM 690 EnduroHusqvarna 701GasGas ES 700Note: Lowering or raising the rear of the motorcycle changes the geometry and handling of the vehicle. Therefore, please make the necessary adjustments to the fork height in order to adapt it to the original geometry or to the respective riding preferences! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden Spacer 7mm B-090 KTM 790 Adventure/R Spacer 10mm B-078 KTM 890 Adventure/R Spacer 10mm B-078 KTM 1190 Adventure/R Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020 Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Complete, high-quality VPS open ended MX handguard set by BARKBUSTERS. Specifications Single point mount (open ended) design, suitable for motocross and enduro bikes Including alloy handlebar clamps with high-strength nylon brackets Universal design - allows for plenty of adjustment in most directions Delivery includes 1 set of highly impact-resistant VPS plastic guards, available in various different colours (please select from above) For added protection, incorporate a variable-height BARKBUSTERS Wind Deflector Set (sold separately) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Delivery includes 1 piece! High-quality pivot mirror by FAR. Ideal for off-road biking as it easily folds to the middle, thus avoiding any damage. FAR is OEM for KTM and Husqvarna (amongst others). Specifications Fits both sides M10 x 1,25 right hand thread 4.5" (11.5 cm) diameter Street-legal by E-number Length from pivot to mirror edge app. 5" (125mm) Manufacturer FAR s.r.l.Via C. Masetti, 12/A 40127 Zola Predosa (Bologna), ItalyHomepageDistributionoffroad-kontor
High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the KTM 690, Husqvarna 701 and GASGAS 700 models without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the OS Rack Looops and the heel plates included in the delivery. The two OS-Rack Loops which are also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). The loops are fastened by screwing them directly to the rear luggage rack. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted (not included). Specifications Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1150 g Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x Double OS-Rack Loops, 2 x OS-Rack Loops and OS-Heelplates 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
Premium oil filter by RACE FX (RFX), suitable for the below-mentioned KTM, Husqvarna, Gas Gas and Beta models. All RFX oil filters are manufactured precisely in accordance with the OEM filters, guaranteeing a reliable engine protection. Suitable for: KTM 250 2-Takt + SX 03-06 250 4-Takt + SX 03-06390 Adventure 20-24 400 EXC Racing 04-05400 EXC 06-07400 SX 04-05 450 SX 03-06450 EXC 2007 520 SX / EXC 99-07 525 SX / EXC 03-07 625 SXC 03-04660 Rally E Factory Replica 06-07660 SMC 04-05690 Duke 08-11690 Duke 12-17 2.Filter690 Duke R 10-11690 Enduro 08-11690 Enduro R 09-11690 Enduro R 12-24 2. Filter690 Rally Factory Replica 09-10 2. Filter690 SMC 08-11690 SMC R 12-24 2. Filter690 Supermoto R 08-09 Beta250 RR 05-09400 RR 05-09450 RR 05-09525 RR 05-09 Husqvarna701 Enduro 16-22 2. FilterGas Gas700 ES 22-24 2. Filter700 SM 22-24 2. Filter Important notice regarding the disposal of waste oils German retailers are bound by law to inform their customers as follows regarding the Ordinance on Waste Oils: Any used oils must be handed over to a respective point of acceptance, as an improper disposal of waste oils may lead to serious pollution of the environment. Any intermixture of oil with foreign substances such as dissolvents, brake or cooling liquids is strictly prohibited. If you are a private customer, you are entitled to return to us free of charge any waste oils in accordance with the amount originally purchased from us or less. The same applies for any used oil filters and/or any oil-bearing waste resulting from an oil change. Please note that this kind of waste counts as dangerous goods - it is therefore essential to use leak-proof packaging when dispatching these goods and to strictly adhere to any regulations imposed by the forwarder in charge. For further information regarding the disposal of the above-mentioned goods, please contact us beforehand: offroad-kontor.de – Jens Scharphuis, Mittelmark 4, 35435 Wettenberg-Launsbach, GERMANY, Tel.: +49-641-96094087, email: info@offroad-kontor.de. Manufacturer RaceFX LtdChallenge WayBlackburn BB1 5QB, United KingdomHomepageDistributionoffroad-kontor
High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different colours - for further information, please see below. Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 3/4" (2 cm) lower than the original foot pegs 5/16" (0,8 cm) rearward compared to the original position Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Suitable for: Husqvarna 701 all Husqvarna 901 Norden all KTM 690 all KTM 790 all KTM 890 all KTM 1050/1090/1190/1290 all GasGas 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in blue anodised Suitable for: Husqvarna 701 Enduro / SM (all) Husqvarna 701 LR "Long Range" (fits both front and rear tanks) GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality case saver billet by the US manufacturer VANASCHE, suitable for the below-mentioned models. Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Providing optimum protection for the engine case and clutch slave cylinder Cut out to offer a view to the front sprocket condition and access to clean/remove debris (unlike the stock cover) Delivery includes the original KTM hardware and a KTM chain slider Also compatible with the Oberon, Rekluse and Sigutech slave cylinders Maximum front sprocket size: 16 teeth Available in black, blue and orange - please select from above Suitable for: KTM 690 Enduro / SMC (all) Husqvarna 701 Enduro / SM (all) GasGas 700 Enduro + SMC Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality, oversized and lowered foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned models. Specifications TIG-welded of heavy duty, high-quality stainless steel Skeletal design for shedding of mud/debris Heavy duty machined clevis for added strength and perfect fitment 1.0" (25 mm) lower than the original foot pegs Tread area size: 2-3/8" x 3-3/4" (60 mm x 90 mm) - depth x width Internal stiffener and low profile underside gussets to maintain ground clearance and exceptional strength 3 taller outer teeth to reduce side slip (taller by 2mm) Includes new pair of cotter pins (factory springs are reused) Fits: Husqvarna 701 all Husqvarna 901 all KTM 690 all KTM 790/890 all KTM 1050/1090/1190/1290 all GasGas 700 Enduro + SMC. all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the KTM 690 Enduro from MY 2019 and Husqvarna 701 Enduro + Supermoto from MY 2020 NEW: All brake pedals have been reshaped to increase strength and the levers for newer bikes equipped with quickshift no longer require the additional sensor cover replacement. Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 690 Enduro and Supermoto from MY 2019 Husqvarna 701 Enduro + Supermoto from MY 2020 GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
Rear brake pedal pad by the US manufacturer VANASCHE, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different versions - for further information, please see below. Specifications Precision-made of heavy duty, high-quality billet aluminum Surface equipped with several pressed dowel pins (PI) or screwed pins (SS) for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Available in the following versions - please select as requested: PP1 - Similar in size and height to the stock lever; mountable to both the original and the VANASCHE brake levers PP2 - Underside mounted pedal pad, slightly oversized from stock and providing an ~3/8" (1 cm) drop. Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP3 - Stepped pedal pad offering two different braking heights for sitting and standing. The upper platform level is about the same height as the stock lever, the lower platform is dropped by about 1/2" (1.3 cm). Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP4 - Oversized pad, simply offering a larger surface area over the stock pedal pad. This pad has two mounting positions, i. e. further forward or rearward Suitable for: KTM 690 Enduro + Supermoto (2011-2017) KTM 690 Enduro + Supermoto 2019+ Husqvarna 701 Enduro + Supermoto from MY 2016 Husqvarna 901 Norden GasGas 700 Enduro + SMC Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor