Others

High-quality, practical mounting kit for securely attaching most GIVI Monokey top cases to the ALTRIDER luggage racks (available separately, see below).  The mounts and hardware included in the kit attach to the luggage racks through the pre-drilled GIVI mounting points already measured to the GIVI Top Case specifications on the rack. The hardware and mounts are very slim and unobtrusive when the top case is not attached to the rack so the kit does not interfere with any strapped-down gear. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Fits almost any GIVI Monokey compatible top cases Note: NOT compatible with Outback Trekker cases! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality heat shield by ALTRIDER, reliably protecting any soft luggage from the high temperatures generated by the exhaust.   The 1/8” (3.2 mm) aluminum is secured using a universal stainless steel clamp. The shield also utilizes high temperature silicon strips to isolate the heat shield – increasing cooling and preventing the shield from scratching the exhaust. The anodized finish ensures the heat shield is extremely resistant to weathering.   The ALTRIDER Universal Heat Shield is highly recommended for use with the ALTRIDER Hemisphere Saddlebag or other soft luggage that may come into contact with the exhaust. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Universal Exhaust Heat Shield mounts to the muffler with stainless steel clamps Silicon strips increase cooling and prevent scratches Anodized finish is extremely resistant to weathering Shield measures: 6" x 3.5" (15.2 cm x 8.9 cm) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality and practical hands-free, in-helmet kit for hydration packs by KRIEGA, specifically designed for use in combination with the KRIEGA 3-litre HydraPak® reservoir and  2-litre HydraPak® Shape Shift Reservoir. Designed for racing conditions when it is safer to keep both hands on the handle bars and concentrate on riding, this kit positions the soft bite valve of the hydration tube permanently near the rider's mouth, providing fast and safe hands-free hydration. A flexible white silicone tube fits along the base of the helmet with a Velcro® patch fixing to the inside of the helmet under the cheek pads. The tube pushes through a hole in the front air vent so that the soft bite valve is in the right position. A quick-release dry-break valve makes it easy to remove the helmet whilst wearing a backpack. The dry-break valve connects to the existing big-bore insulated tube on the KRIEGA Hydro-3 or existing clear tube on the KRIEGA Hydro-2. Specifications White silicone tube with KRIEGA branding Weight: 55 g Soft bite valve Easy fit by Velcro® tube management Quick-release dry-break connector Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, extremely handy rucksack harness pocket by KRIEGA, also fitting waist pack belts and messenger bags and providing an easy-access storage for smallish items, such as sun glasses, wallets, smart phones etc. Available in 2 versions: LEFT - wear on the right with LEFT handed access, RIGHT - wear on the left with RIGHT handed access. Specifications Made of extremely tough 1000D Cordura® and Hypalon Size: 180 mm x 95 mm x 35 mm (7” x 3.7” x 1.3”) (H x W x D) Volume: 0.6 litres Weight: 110 grams Padded construction Double Velcro® attachment YKK® water-resistant zip Reflective black dots Fits all KRIEGA rider packs (excluding R35) Available for right or left hand access - please select from above 10-year guarantee - learn more

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the vast majority of adventure bikes, old or new, including those with passenger grab handles and rear racks. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the four heavy-duty OS-Rings included in the delivery, which are simply exchanged for the original mountings. The four Subframe Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). Specifications Specifically designed and manufactured for the vast majority of adventure bikes Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 4 OS-Rings, 4 Subframe Loops and 2 EVA pads for an additional abrasion protectionAvailable in black10-year guarantee - learn moreBODYWORK DAMAGE DISCLAIMEREven though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle.Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Aprilia Tuareg 660 model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, and panniers as well as the KRIEGA US-Drypacks as top bags, and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two alloy mounts for Aprilia Tuareg 660 included in the delivery, which are simply exchanged for the original mountings. This innovative mounting solution ensures a safe and reliable transport of luggage, even in challenging terrain. The set length straps make mounting a breeze and the purpose-designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). Specifications Specifically designed and manufactured for the Aprilia Tuareg 660 models Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x 120mm Frame Loops, 2 x Sub-Frame Loops and 2 x Aprilia Tuareg alloy mountsAvailable in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit all BMW GS models with a rear rack. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the four heavy-duty OS-Rings included in the delivery, which are simply exchanged for the original mountings. The four Subframe Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).   Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). SpecificationsSpecifically designed and manufactured for all BMW GS modelsHeavy-duty Hypalon™ construction with a semi-rigid polypropylene coreVery stable and lightweightCarrying capacity from 12 to 54 litres with centre pack mounting optionWeight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit)Quick and easy to put on/take off Reinforced stitching on all stress pointsAircraft grade alloy hooksNon-slip cam bucklesDelivery includes 4 OS-Rings, 4 Subframe Loops and 2 EVA pads for an additional abrasion protectionAvailable in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMEREven though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle.Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the latest lightweight enduro bikes without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two OS-Dirtbike rings included in the delivery, which are simply exchanged for the original mountings. The four OS-Rack Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). In addition, combined with the additional loops of the OS-Base, the a. m. OS-Rack Loops offer various mounting options for up to three bags. The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. The silicone heat shield also included in the delivery provides a safe barrier from the exhaust. It simply mounts to the silencer using the two zip-ties provided. Specifications Specifically designed and manufactured for the latest lightweight Enduro bikes Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 OS-Dirtbike rings, 4 OS-Rack Loops and 1 silicone heat shieldAvailable in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Ducati Desert X model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, and panniers as well as the KRIEGA US-Drypacks as top bags, and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two alloy mounts for Ducati Desert X included in the delivery, which are simply exchanged for the original mountings. This innovative mounting solution ensures a safe and reliable transport of luggage, even in challenging terrain. The set length straps make mounting a breeze and the purpose-designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ALTRIDER universal one (available separately). Specifications Specifically designed and manufactured for the Ducati Desert X models Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1,150 / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x 70mm Frame Loops, 2 x 100mm Frame Loops and 2 x Desert X alloy mounts Available in black 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Honda CRF300L and CRF300 Rally models without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two Honda Strap Mounts included in the delivery, which are simply exchanged for the original mountings. The four CRF Bolt-on Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. Specifications Specifically designed and manufactured for the Honda CRF300L and CRF300 Rally models Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 800g / 1.7lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x Honda strap mounts and 4 x CRF bolt-on loops 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. Therefore, we strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the KTM 690, Husqvarna 701 and GASGAS 700 models without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the OS Rack Looops and the heel plates included in the delivery. The two OS-Rack Loops which are also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). The loops are fastened by screwing them directly to the rear luggage rack. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted (not included). Specifications Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1150 g Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x Double OS-Rack Loops, 2 x OS-Rack Loops and OS-Heelplates 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Honda CRF 1100 L Africa Twin model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two Honda Strap Mounts included in the delivery, which are simply exchanged for the original mountings. The four CRF Bolt-on Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ENDURISTAN Inferno one (available separately). Specifications Specifically designed and manufactured for the Honda CRF 1100 L Africa Twin model (does NOT fit the Adventure Sports models!!!) Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1150g / 2.5lb (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x Honda strap mounts and 4 x CRF bolt-on loops Also including 2x (L+R) pre-cut paintwork protection film 10-year guarantee - learn more BODYWORK DAMAGE DISCLAIMER Even though most of the OS-BASE is mounted on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. For reasons of protection, this kit includes a pre-cut clear adhesive protective film. Over a long period of time, this may need to be replaced where abrasion may occur on the motorcycle. Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the KTM 790 Adventure model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two 790 Strap Mounts and the four Alloy Spacers included in the delivery. These are screwed to the rear luggage rack in order to raise it. The two OS-Rack Loops which are also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). The loops are fastened by screwing them directly to the rear luggage rack. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ENDURISTAN Inferno one (available separately). Specifications Specifically designed and manufactured for the KTM 790 Adventure model Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1150 g Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x 790 Strap Mounts, 2 x OS-Rack Loops and 4 Alloy Spacers 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the Yamaha Tenere 700 model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two T7 Strap Mounts included in the delivery, which are simply exchanged for the original mountings. The four T7 Bolt-on Loops also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above).  Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ENDURISTAN Inferno one (available separately). Specifications Specifically designed and manufactured for the Yamaha Tenere 700 model Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 800 g (OS-BASE plus Fit Kit) Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x T7 Strap Mounts and 4 x T7 Bolt-on Loops 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

The KRIEGA OS-Bottle is a versatile heavy-duty bottle holder, offering an easy access to 2 x 1 litre drink or fuel bottles. When traveling, it is useful to take along water and on some occasions also extra fuel. The KRIEGA OS-Bottle holster can be attached to various different KRIEGA US and OS bags (available separately, see below) as well as to the TANK US Tank Adapter (available separately) and is suitable for carrying bottles with all kinds of liquids. Specifications   Made of ultra-tough Hypalon synthetic material Dimensions: 250 mm x 180 mm x 60 mm (8.2" x 6" x 2.3") (H x W x D) Weight: 375 g (13.2 oz) Maximum bottle size: 80 mm diameter x 280 mm length (3˝x 11˝) Draw-string and compression strap retainer Aircraft-grade alloy and heavy-duty Acetal cam buckles 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, compact tie down mounting plates by KRIEGA, designed to be fixed instead of the pillion footrests (see the a. m. image) and custom-made to fit the Aprilia Tuareg 660 model. The brackets are made of a sturdy synthetic material and provide an improved mounting location for the KRIEGA OS-Base (available separately, see below). Specifications Delivered in pairs Weight: 85 g / 3 oz per pair Available in black Made of ultra-durable, CNC machined Nylon-6 Installation Hardware included. Mounted instead of the pillion footrests (NOTE: Delivery does not include any panniers or saddlebags!) Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, compact tie down mounting plates by KRIEGA, designed to be fixed instead of the pillion footrests (see the a. m. image) and custom-made to fit the models mentioned below. The brackets are made of a sturdy synthetic material and provide an improved mounting location for the KRIEGA OS-Base (available separately, see below). Specifications Delivered in pairs Weight: 85 g / 3 oz per pair Available in black Made of ultra-durable, CNC machined Nylon-6 Installation with original screws instead of the pillion footrests (NOTE: Delivery does not include any panniers or saddlebags!)Fits:KTM 790 AdventureKTM 890 AdventureHusqvarna Norden 901 Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, compact tie down mounting plates by KRIEGA, designed to be fixed instead of the pillion footrests (see the a. m. image) and custom-made to fit the Yamaha Tenere 700 model. The brackets are made of a sturdy synthetic material and provide an improved mounting location for the KRIEGA OS-Base Yamaha Tenere 700 Fit (available separately, see below). Specifications Delivered in pairs Weight: 85 g / 3 oz per pair Available in black Made of ultra-durable, CNC machined Nylon-6 Installation with the OEM screws for the pillion footrests Available for both the standard and rally seats - please select from above (NOTE: Delivery does not include any panniers or saddlebags!) Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, compact mounting plates for KRIEGA OS straps, designed to be fixed just above the footrests (see a. m. image). Suitable for the below-mentioned KTM and Husqvarna models. The Heel Plates provide an improved mounting location for the OS-Base lower straps (Base available separately, see below). Specifications Delivered in pairs Weight: 74 g each Suitable for KTM 690 from MY 2019 and Husqvarna 701 from MY 2015 Made of ultra-durable, CNC-machined Nylon 6 High impact resistance Uses KTM and Husqvarna standard fitting hardware Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Uniquely designed low-profile fasteners by KRIEGA, fitting any style of motorcycle bodywork, even rear fuel-tank KTM's and Husabergs. Any KRIEGA US- or OS-Tailpack from 5 to 30 litres can be used on a dirtbike rear or front fender or wherever you want. Specifications Lightweight T6 alloy - only 25g per loop Easy fit, just drill 4 x 6mm holes 19mm nylon loops Delivery includes 4 fasteners with matching nylon washers 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

Uniquely designed low-profile fasteners by KRIEGA, fitting the original rear racks of the KTM 1090, 1190 and 1290 Adventure models to create 4 hook points for mounting any KRIEGA US- or OS-Tailpack from 5 to 30 litres (available separately, see below). Specifications Made of tough, lightweight T6 alloy - only 25 g per loop Also perfect for mounting roll-top bags and tents using KRIEGA Cam Straps or OS-Cam Straps (available separately) Easy fit - no drilling required 19mm nylon loops Delivery includes 4 fasteners with matching nylon washers 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, functional tool roll by KRIEGA, made of tough synthetic material. Featuring various heavy-duty zipped pockets and an aluminium rail with 8 fixings, alternatively replacing 5 elastic loops (see images above). Note: Delivery does NOT include any tools!  Specifications Made of 1000D Cordura® and Hypalon Size: 460 mm x 270 mm / 18 x 10.6 inch (L x W, unfolded), 270 mm (W) x 95 mm (Ø) minimum size folded, 270 mm (W) x 135 mm (Ø) maximum size folded Weight: 0.5 kg net Adjustable cam strap fastening with hook closure Delivery includes 8 adjustable 3/8" BIT fixings on a 6061-T6 aluminium rail - 3 further socket rails featuring 1/2", 3/8" and 1/4" fittings available separately as spares (see below) Mesh pocket made of Hypalon with YKK zip, extremely tough and durable 2 further zipped pockets for small items, size: about 240 mm x 90 mm x 30 mm each Tools NOT included! Available in black 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, 100% waterproof bolt-on fender pack by KRIEGA. Ideal for carrying safety equipment, small tools, dry gloves etc. on a motorcycle. Specifications  Material: 1000D Dupont® Cordura® Ultra-tough, abrasion-resistant RHINOTEK fabric on base with 4 x heavy-duty rivets DRYPACK = taped-seam liner, fixed with Velcro®  100% waterproof Size: 200 mm x 175 mm x 70 mm (L x W x H) Volume: 2.5 litres Velcro® closure strap 10-year guarantee Delivery includes: 4 x CNC 6061-T6 alloy fasteners with nylon spacer washers 4 x stainless steel fasteners 1 drilling guide (product packaging) Fitting  Remove the white liner (Velcro® top edge) and remove the bag from the packaging The product packaging is designed to be used as a drilling guide  Line up the guide on the rear fender and drill 4 x 6mm diameter holes Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam) Tighten anti-clockwise and always use thread lock Allow 24 hours to dry Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage

High-quality, functional tool roll by KRIEGA, featuring a highly individual design. Available in two different versions - please select from above. The Roland Sands Design X KRIEGA Roam Tool Roll is an indispensable piece of kit on any road trip. Constructed from RSD’s propriety wax cotton together with 1000D Cordura® and a super tough Hypalon reinforcement, the roll offers an interesting blend of strong and durable classic and modern materials with a technical twist. Note: Delivery does NOT include any tools!  Specifications Made of RSD waxed cotton and 1000D Cordura® Size: 270 mm x  110 mm (length x diameter, empty and folded) - 170 mm diameter at maximum fill level Weight: 0.6 kg net Capacity: 4 liters 3 rows featuring 5 elastic loops each (Note: any 5 loops will be covered by fixing one BIT rail!) 8 adjustable 3/8" BIT fixings on a 6061-T6 aluminium rail - 3 further socket rails featuring 1/2", 3/8" and 1/4" fittings available separately as spares (see below) Adjustable cam strap fastening MOLLE modular mounting system with 4 adjustable straps 4 zipped inner pockets featuring large YKK zips - size per pocket: 240 mm x 90 mm x 30 mm Heavy-duty carrying handle Available in black and Ranger - please select from above Tools NOT included! 10-year guarantee Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303  DreieichGermanyHomepage