Luggage

High-quality, practical mounting kit for securely attaching most GIVI Monokey top cases to the ALTRIDER luggage racks (available separately, see below).  The mounts and hardware included in the kit attach to the luggage racks through the pre-drilled GIVI mounting points already measured to the GIVI Top Case specifications on the rack. The hardware and mounts are very slim and unobtrusive when the top case is not attached to the rack so the kit does not interfere with any strapped-down gear. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Fits almost any GIVI Monokey compatible top cases Note: NOT compatible with Outback Trekker cases! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Spacious, waterproof tank bag in proven ALTRIDER quality.The Hemisphere's main compartment holds approximately 11 liters, i. e. plenty of room for everything to be reached quickly and easily. A robust metal closure allows effortless opening and closing, even with gloves. The tough nylon fabric ensures a long-lasting closure. Removable dividers allow a customised design of the compartment, and a waterproof inner lining with fully taped seams protects the gear from the elements. The lining can be left open for an easy access or closed with the roll-top closure for an all-round protection.The tank bag's clever shape is designed for use on a variety of motorcycles, meaning that it does not interfere with the tank vent hose on sport enduros, allows easy access to the ignition on larger motorcycles, and does not interfere with any motorcycle controls. The proven strap attachment allows for an easy refueling and is secured with several straps made of robust nylon and high-strength Delrin buckles. The sheathed straps under the main compartment offer an easy and secure attachment to the motorcycle with no visible buckles, preventing any interference with standing or sitting riding.The tank bag attaches to the base plate with a durable YKK zipper and is easily removable. It also features an internally accessible map pocket for maximum protection from the elements - many other tank bags have an external zipper, which seals in more moisture. The front panel is made of durable, marine-grade vinyl which is UV-resistant and highly transparent. The exterior pocket features a small storage compartment for quickly accessible items.The Hemisphere tank bag is constructed from 1050D nylon with military-grade stitching, and all straps are made of high-strength nylon fabric. Reflective logos on both sides of the bag provide an increased visibility and safety during low-light or nighttime riding. Specifications 100% made in the USAUniversal strap design, compatible with dirt bikes and larger adventure motorcyclesNo visible buckles to hinder the rider's legs11-liter main compartmentWaterproof lining inside the main compartmentRobust YKK zipper for attaching the bag to the strapSturdy metal lock allows easy opening and closing, even with glovesInternal zippered map pocket with a touchscreen-compatible marine-grade vinyl finishExternal pocket for quick-access itemsBallistic 1050D fabric, military-grade stitching, and durable nylon webbingHard plastic stiffeners with closed-cell padding inside the main compartment provide a stable platform for securing the gearReflective logos for an increased visibilityDimensions: Rear height: 20.32 cm (8 inches), front height: 12.7 cm (5 inches), width: 23.9 cm (9.4 inches), length: 28 cm (11 inches)Color: Black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, fitting the below-mentioned Honda models. This robust and durable rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OBERLAND FUEL mounts in order to carry fuel and water packs. Specifications 100% designed and made in the USA Fitting Honda CRF 300 L / Rally Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX and OVERLAND FUEL mounts Textured powder-coated black 10 gauge steel brackets securely mount the rack to the sub-frame at four points Quick and easy installation with the included stainless steel hardware Available in black and silver - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack system by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box (requires the Givi Top Case mounting kit). Compatible with the R 1200/R 1250 GSW Adventure with the rear luggage rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). An alternative configuration allows the simultaneous mounting of the pillion rack, factory plastic rack with grab handles, and rear rack in upper position bolted to the factory rack (see image above). The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Note: The pillion rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Dimensions: length = 27.9 inch (70.8 cm) x width = 16 inch (40.6 cm) Weight: 6 lbs (2.8 kg) Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in anodized black and silver - please select from above

High-quality, practical luggage rack system by ALTRIDER, suitable for he Honda CRF1000L Africa Twin. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. Both racks are compatible with factory side cases and are available in both a clear anodized silver and black anodized finish. Specifications Laser cut from 3/16 in (4.76 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Rear rack compatible with ROTOPAX mounts and GIVI Monokey top cases Solid top surface on pillion rack helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin standard models from MY 2018 - 2019 (not suitable for Adventure-Sports-models)

High-quality pillion luggage rack by ALTRIDER, suitable for the  BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER pillion luggage rack is the only offering on the market to replace the rear seat and combine with the ALTRIDER Rear Luggage Rack (available separately) for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. For the ultimate carrying capacity, combine the pillion rack with ALTRIDER's Luggage Rack System (available separately). The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Also compatible with the R 1200/R 1250 GSW Adventure (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is not compatible with the original BMW Vario side cases! Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of ALTRIDER's Luggage Rack System for the BMW R 1200/R 1250 GS + GSA LC (Rear luggage rack available separately - see below) Dimensions: Length = 14.4 inch (36.6 cm) x Width = 12.4 inch (31.5 cm) Weight: 3 lbs (1.4 kg) Mounts using pillion seat keyed latch – no hardware or tools required Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in anodized black and silver  - please select from aboveManufacturer:AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality pillion luggage rack by ALTRIDER, suitable for the below-mentioned Honda models. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 Honda CRF1100L Africa Twin Adventure Sports from MY 2020 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality pillion luggage rack by ALTRIDER, suitable for the Honda CRF1000L Africa Twin. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with factory side cases and the factory rear top box, and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1000L Africa Twin Standard        MY 2018 and up Honda CRF1000L Africa Twin ADV Sports    MY 2017 and up

High-quality pillion luggage rack by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Fits:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024

High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality pillion luggage rack system by ALTRIDER, suitable for the below-mentioned Honda models. This system combines the rear luggage rack and the pillion luggage rack to create a complete and robust ALTRIDER mounting system. The racks are constructed from laser cut aluminum which is grained to remove burrs before being formed and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps, even on longer rides. The rear luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing the use of any Monokey-compatible top box. The pillion luggage rack is the only offering on the market to replace the rear seat. The solid top surface helps prevent water intrusion into the space below the rack. Installation of ALTRIDER's luggage rack system is quick and easy with the included stainless steel hardware. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat in either the high or low position. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 (only fitting with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Honda CRF1100L Africa Twin Adventure Sports from MY 2020

High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for  BMW F 750 / 850 GS models. The ALTRIDER luggage rack for the above-mentioned BMW models is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX or OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box. Installation is quick and easy with the included stainless steel hardware.  Specifications All ALTRIDER products are 100% designed and manufactured in the USA Laser cut from 3/16 inch (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX and OVERLAND FUEL mounts (available separately) and GIVI Monokey top cases Delivery includes the necessary mounting material Suitable for BMW F 750 / 850 GS Available in black anodized Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, suitable for the BMW R 1200/R 1250 GS + GSA LC. This ALTRIDER luggage rack has been constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. Installation is quick and easy with the included stainless steel hardware. The luggage rack is pre-drilled for easy integration with ROTOPAX or OVERLAND-FUEL mounts for carrying fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokeyhard mount points, allowing for use with any Monokey-compatible top box. Compatible with the R 1200/R 1250 GSW Adventure with the rack mounted in a lower position (requires removal of OEM steel top box rack - compatible with steel pannier racks). Note: This rack is only compatible with the original BMW Vario side cases when mounted in the upper position!Specifications 100% designed and manufactured in the USA Laser cut from 3/16 in (4.76 mm) aluminum Part of the ALTRIDER Luggage System for the R 1200/R 1250 GS LC (Pillion Rack available separately - see below) Dimensions: length = 13.5 inch (34.3 cm) x width = 16 inch (40.6 cm) Weight: 3 lbs (1.4 kg)  Mounts in upper or lower position, without additional brackets or removing the pillion seat Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX or OVERLAND FUEL mounts and GIVI Monokey top cases Available in anodized black and silver  - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin Adventure Sports model. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX and OVERLAND FUEL mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin ADV Sports from MY 2020 (also fitting the standard model with the rear OEM luggage-rack mount #08L88-MKS-E00ZA!) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, suitable for the Honda CRF1100L Africa Twin standard model. This robust and durable rack is constructed from a single piece of laser cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items the rider needs to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides.The luggage rack is pre-drilled for easy integration with ROTOPAX and OVERLAND FUEL mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey hard mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. ALTRIDER’s luggage rack for the Africa Twin is compatible with factory side cases, and is available in a clear anodized silver finish and black anodized finish. Specifications Laser-cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX and OVERLAND FUEL mounts and GIVI Monokey top cases Available in black and silver - please select from above Suitable for: Honda CRF1100L Africa Twin Standard from MY 2020 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

This unique ALTRIDER luggage rack for the KTM Adventure-models can be mounted in multiple positions to suit most luggage needs. Bolt it directly to the factory rack to create a larger, more versatile platform for any gear. The rack can also replace the OEM rack, bringing the load and center of gravity closer to the ground. Finally, the luggage rack can be mounted without the factory rack or passenger grab handles – allowing to combine it with the ALTRIDER pillion rack to create a flat, continuous luggage surface.  All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL -fuel packs. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. Hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing strength. Learn more about how ALTRIDER luggage racks are developed in our blog post Hooked: How We Developed Our Luggage Racks. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Luggage rack can be mounted in multiple configurations Strategically placed cutouts provide ample mounting points without sacrificing strength Completely smooth luggage surface 3/16” (4.8 mm) laser-cut anodized aluminum Interfaces with ROTOPAX and OVERLAND FUEL fuel packs Available in silver or black Suitable for: Husqvarna Norden 901 KTM 790 Adventure/R 890 Adventure L/R 1050 Adventure 1090 Adventure/R 1190 Adventure/R 1290 Super Adventure R-S-T Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality luggage rack by ALTRIDER, custom-made for the Yamaha Tenere 700 models mentioned below.. This unique rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and powder coated for a durable finish that looks great. The unique coined cutouts are specially shaped to safely accommodate a wide variety of straps and hooks, allowing to carry almost any piece of luggage or item securely. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL fuel packs (available separately). The hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing any strength.  Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 3/16” (4.8 mm) laser-cut anodized aluminum Completely smooth luggage surface Including two 3.2mm thick steel fittings ensuring a secure four-point mounting on the rear frame Interfaces with ROTOPAX or OVERLAND FUEL fuel packs Delivery includes the necessary installation hardware Available in silver or black - please select from above NOTE: Delivery does NOT include the pillion rack shown above, it is available separately!Fits:Yamaha Tenere 700 Standard     2019-2024Yamaha Tenere 700 Rally            2020-2024Yamaha Tenere 700 World Raid  2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality rear luggage rack by the renowned US manufacturer ALTRIDER, suitable for the Yamaha XT1200Z Super Tenere. The ALTRIDER luggage rack for the Super Tenere is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and anodized for durability. The unique cutouts are shaped to accommodate a wide variety of straps and hooks to secure whatever luggage or larger items you need to carry. Each cutout and all edges are machined with a rounded profile to eliminate wear on straps even on longer rides. The rack comes with a mounting bracket, made from 3/16 inch (4.75 mm) anodized aluminum, which replaces the stock plastic mounting bracket and greatly increases the rack’s capacity.The luggage rack is pre-drilled for easy integration with ROTOPAX mounts in order to carry fuel and water packs. It also includes pre-drilled mounting holes for GIVI Monokey mount points, allowing for use with any Monokey-compatible top box.Installation is quick and easy with the included stainless steel hardware. The rack may be installed in two different positions, i. e. either in the customary high position on top of the passenger seat and handles, or in a lower position without these two items. ALTRIDER’s luggage rack for the Super Tenere is compatible with the factory side cases, and is available in a clear anodized silver finish and black anodized finish. Note: This rack is not compatible with the original YAMAHA top case! Specifications All ALTRIDER products are 100% designed and manufactured in the USA Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Compatible with ROTOPAX mounts (available separately) and GIVI Monokey top cases Dimensions: 3 inches (7.6 cm) x 14 inches (35.6 cm) x 14 inches (35.6 cm) (H x W x D) Weight: 3 lbs (1.4 kg) Suitable for Yamaha XT1200Z Super Tenere from MY 2010 Available in black and silver - please select from above Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality, waterproof saddlebag by ALTRIDER, available in various colours and sizes (see below). Each bag has a fully tape-seam sealed, D-shaped body construction made of 18oz vinyl coated fabric (“Truckers Tarp”). The SYNCH bags are designed to be 100% dust and waterproof, engineered to withstand the most extreme temperatures and wet weather over hundreds and thousands of miles of trails and roads.   SYNCH was designed with accessibility and flexibility in mind. Each bag features daisy chains for easy lashing of camping gear like bed rolls and tents. There are four anchor points with high strength nylon D-rings for strapping the bags to the bike and for connecting bags to each other. All of the anchor patches are made from a military grade, waterproof and chemical resistant neoprene. Designed for quick entry, the side openings of the M-sized bags allow access to either of the bags' two openings without having to release the tie-down straps. This holds true when the bags are stacked on each other as well.   Each dry bag includes tie-down and stacking straps. One end of the tie-down features a soft-loop style closure, perfect for attaching to crash-bars, trellis frames, luggage racks and other great tie-down points. The other end is a heavy duty, steel wire-gated military grade nylon snap-hook for securing to the bags. Specifications Made of 18oz waterproof and durable  “Truckers Tarp” synthetic material Wide-mouth roll-down opening with cinching straps Military-spec neoprene on all anchor patches Tape-seam sealed construction for water and dust proof performance Daisy chain(s) for extra gear lash-points Nylon D-rings for tie-down and stacking options Custom tie-down straps (can be used as shoulder straps for portage) Custom stacking straps (for connecting to other bags and gear) Colour options: black, grey or white Sizes available - please select from above: M: 25 liters - Approximate stuffed dimensions: 53 cm x 27 cm x 27 cm L:  38 liters - Approximate stuffed dimensions: 61 cm x 36 cm x 29 cm Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality heat shield by ALTRIDER, reliably protecting any soft luggage from the high temperatures generated by the exhaust.   The 1/8” (3.2 mm) aluminum is secured using a universal stainless steel clamp. The shield also utilizes high temperature silicon strips to isolate the heat shield – increasing cooling and preventing the shield from scratching the exhaust. The anodized finish ensures the heat shield is extremely resistant to weathering.   The ALTRIDER Universal Heat Shield is highly recommended for use with the ALTRIDER Hemisphere Saddlebag or other soft luggage that may come into contact with the exhaust. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Universal Exhaust Heat Shield mounts to the muffler with stainless steel clamps Silicon strips increase cooling and prevent scratches Anodized finish is extremely resistant to weathering Shield measures: 6" x 3.5" (15.2 cm x 8.9 cm) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Foldable and removable inner bag by GLOBESCOUT, fitting 40-liter top cases. Specifications  Volume: 40 liters Size: 380 mm x 320 mm x 290 mm (L x B x W) Made of tough 1000D nylon Easily accessible by an all-around double zip at the top With two practical handles for carrying off-case Available in black Manufacturer YILDIZ BRONZ Ltd.Davutpaşa C. 22/5234010 Topkapı / Istanbul, TürkiyeHomepageDistributionoffroad-kontor

Foldable and removable inner bag by GLOBESCOUT. Specifications Size: 380 mm x 220 mm x 290 mm (L x B x W) Made of tough 1000D nylon Easily accessible by an all-around double zip at the top With two practical handles for carrying off-case Available in black Manufacturer YILDIZ BRONZ Ltd.Davutpaşa C. 22/5234010 Topkapı / Istanbul, TürkiyeHomepageDistributionoffroad-kontor

High-quality GLOBESCOUT luggage rack, specifically constructed for the below-mentioned BMW model.  Specifications  Made of a sturdy aluminium-magnesium mixed alloy Colour: Natural anodized Fits with the GLOBESCOUT Series I + II Top Cases Suitable for: BMW R 1200 GS LC from MY 2013 Does NOT fit the Adventure models!!!

High-quality GLOBESCOUT luggage rack, specifically constructed for the below-mentioned Honda models. Specifications  Made of a sturdy aluminium-magnesium mixed alloy Colour: Natural anodized Suitable for: Honda CRF1000L Africa Twin standard models from MY 2016 Manufacturer YILDIZ BRONZ Ltd.Davutpaşa C. 22/5234010 Topkapı / Istanbul, TürkiyeHomepageDistributionoffroad-kontor