Bar Risers

High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications  100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality handlebar riser kit by BARKBUSTERS, rising the bar by 20 mm. Suitable for the below-mentioned BMW models. Specifications  Made of an extremely tough aluminium alloy Fits 22mm standard handlebars with a 35mm to 38mm hole separation  Optimises the riding position Available in silver Delivery includes the necessary mounting material and instructions Note: It is essential to always check and confirm that the bike has the adequate cable and brake line lengths before installing any handlebar risers! Suitable for: BMW F650GS    up to MY 2007 BMW G650GS   2006-2008 BMW R100GS    up to MY 1990 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Handlebar riser from ROX, suitable for 28.5 mm handlebars. 38 mm up and 25 mm backwards. Features:Made in the USA Made of high-quality 6061-T6 aluminum with a matte black anodized finishRaises the handlebars by 38 mm (1.5") up and 25 mm (1") backwards. All mounting hardware included This riser comes with (2) step washers that allow the riser to be mounted on an OEM step-down triple clamp, similar to the one used on the Honda Africa Twin. Works well with the BMW F850GS, the Honda Africa Twin, the 2021-present Triumph Trident 660, and many other motorcycles with 28.5 mm diameter handlebars. Does not fit Triumph Tiger models!!! IMPORTANT: These risers cannot be installed on motorcycles with angled (e.g., V-shaped) OEM handlebar clamps. OEM handlebar clamps must be parallel and designed for M8 bolts for this riser to install properly. Manufacturer Rox Speed FX37829 Rock Haven RoadCohasset MN, 55721, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality handlebar risers by ROX, specifically designed for the 2013 and newer BMW R1200GS liquid cooled bikes that come with 1 1/4 inch handlebars. Note: These risers will NOT work on the older R1200GS models! Specifications Made in the USA of high-quality aluminium Clear anodised finish 1 1/2" of total rise Includes all the necessary mounting hardware Manufacturer Rox Speed FX37829 Rock Haven RoadCohasset MN, 55721, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Lifetime Warranty Made in the USA 2" (51mm) Center-to-Center Rise Pivots Backward/Forward based on Rider Preference 1 1/8" Stem (28mm) Accepts 1 1/8" Handlebar (28mm) Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers! These risers will mount on virtually any machine that has a solid 1 1/8" tubular handlebar and open mounting area. NOT APPROVED for use on bikes with clip-on style handlebars.  Full range of adjustment allows the rider to find their own individual bar position. Designed, Manufactured, and Assembled in the USA. Make your machine fit YOU, not the other way around. A more comfortable ride means a longer ride—and who doesn’t want that? Patented by the US Patent and Trademark Office under US Patent #6,920,806. Fitment These risers will mount on essentially any machine that has a handlebar that measures 1 1/8" at the bar clamps, has open mounting area, and has enough cable slack to accomodate the risers. Here is a partial list of all the machines these risers will mount on. BMW: R1200GS (2012-older), R1200R (2014-older), rNineT, S1000R, F800GT, S1000R Ducati: Hypermotard, Multistrada (2010-newer) Honda: CTX700, CTX1300, Africa Twin Kawasaki: Z1000 KTM: 250, 300XC, 350EXC/XC/SX, 450EXC/SX/XC, 500EXC/XC, 690 E/R, 990 Adv/Baja/Super Enduro, 1190 ADV, 1290 Super ADV Moto Guzzi: Stelvio 1200 Triumph: Speed Triple (2008-newer), Tiger 800 XC / XCS (2011-newer), Tiger 800 Street/Roadie (2011-newer), Tiger 1200 Explorer Yamaha: Vmax, FJ09, Super Tenere (2013-older; (2014 and newer Super T's need the 1R-P2PPS10A riser) and many many more… Manufacturer Rox Speed FX37829 Rock Haven RoadCohasset MN, 55721, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

The black anodized Vario relocation converter, made of robust, CNC-machined aluminum for mounting 28 mm handlebars, allows a relocation of 50 mm, or even 60 mm with a spacer, from the original handlebar position.Maximum flexibility: Vario handlebar relocations allow for continuous forward and backward adjustment as well as variable height adjustment. The adapters thus offer the greatest possible flexibility when adjusting the steering and thus seating position. For vehicles with a 22 mm handlebar mount for mounting 28 mm handlebarsCorrosion protection thanks to black anodizingVariable handlebar riser and relocation for individual handlebar positioning by 50 mmSpacer for optional rise of an additional 10 mmModel-specific design for the best fitCNC-machined from high-strength aluminum alloy Scope of delivery 2 x Vario handlebar risers/converters2 x spacers (10 mm)Installation instructionsMounting hardware DetailsMaterial: aluminumFinish: anodizedColor: blackTotal weight: approx. 0.5 kg NoteNot approved for use in Germany under the German Road Traffic Licensing Regulations (StVZO).The length of the Bowden cables and brake lines must be checked individually. Approval informationThe ABE certificate booklet supplied with the product must always be carried when riding. This ABE is only valid for the listed models and in compliance with the information in the installation instructions. An entry in the vehicle documents is not necessary if you carry the document with you.