Handlebars & Co.

High-quality, universal ALTRIDER handlebar riser kit, rising the bar by 30 mm. Elegantly machined from aircraft-grade aluminum, this item has been created to rise a vide variety of motorcycle handlebars. The offset geometry of the clamping faces prevent the bars from rotating, while non-corroding stainless socket head screws and screw head covers keep everything weather-resistantly in place. The risers have been bead-blasted, then finished in an anodized black and feature an engraved ALTRIDER logo. In most situations, their installation is compatible with the OEM wiring and brake/clutch cables, i. e. there is no need to extend or re-route any cables on the bike. Note: It is essential to always check and confirm that the bike has adequate cable and brake line lengths before installing any handlebar risers! The ALTRIDER 30 mm Block Handlebar Risers are designed to fit on any bike with a stock 1-1/8" (28,5 mm) handlebar, parallel OEM bar clamps and an open mounting area. They are quickly and easily installed by using the four included bolts. Specifications  100% designed and made in the USA Machined from 6061 billet aluminum Fit motorcycles with 28.5mm tapered handlebars Optimise the riding position Offset clamp design to ensure a secure clamping force Easy 4-bolt installation Delivery includes all the necessary mounting material and instructions Engraved ALTRIDER logo Available in matte black anodized IMPORTANT: OEM bar clamps must be parallel and sized for M8 bolts in order for these risers to mount properly! Cannot be installed on bikes with angled (eg. V-Shaped) OEM bar clamps! Cannot be installed where the OEM clamping bases are offset (bases must be level)! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality BARKBUSTERS plastic handguards for the EGO-001 and EGO-005 handguard sets (available separately, see below).Spare-Part! Plastics are included in every EGO-001 and EGO-005 Mounting Kit. Specifications Delivery includes two handguards and a fastening screw kit Made of high-impact, extremely resistant plastic Curved profile, ideal for tight bush riding Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality set (L/R) of two BARKBUSTERS bar end mountings, suitable for handlebars with an internal diameter of 10 mm. Note: This kit only includes the clamps - no screws included! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS bar end mounting kit, suitable for handlebars with 18 mm internal size. Delivered as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

BARKBUSTERS bar end mounting kit, suitable for handlebars with 14 mm internal size. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

BARKBUSTERS bar end mounting kit, suitable for handlebars with 12 mm internal size. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality bar end plug by BARKBUSTERS offering maximum handle protection. Specifications Delivery includes two plugs Designed to minimise grip damage Machined from high-grade aluminium and anodised Includes internal fittings for 14mm alloy bars and 18mm steel bars Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Bent clamp connector by BARKBUSTERS, replacing the straight one for additional hose/cable clearance. Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality handlebar riser kit by BARKBUSTERS, rising the bar by 20 mm. Suitable for the below-mentioned BMW models. Specifications  Made of an extremely tough aluminium alloy Fits 22mm standard handlebars with a 35mm to 38mm hole separation  Optimises the riding position Available in silver Delivery includes the necessary mounting material and instructions Note: It is essential to always check and confirm that the bike has the adequate cable and brake line lengths before installing any handlebar risers! Suitable for: BMW F650GS    up to MY 2007 BMW G650GS   2006-2008 BMW R100GS    up to MY 1990 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Spare part - Included in each BARKBUSTERS STORM hand guard kit! Attachment kit by BARKBUSTERS for fixing the STORM shells on the backbone (available separately, see below). Delivery includes the necessary mounting material and instructions. Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality handlebar end weights by BARKBUSTERS, suitable for the VPS/Jet and Adventure backbones. Specifications Delivery includes 2 bar ends Designed to minimise handlebar vibrations Made of forged steel with powder-coated finish Adds approximately 180 g per unit Fits externally to the VPS/Jet and Adventure backbones (available separately, see below) Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Screw kit to fix BARKBUSTERS wind deflectors to VPS plastic guards. Note: This is a replacement part - the a. m. screw kit is included in the delivery scope of all original BARKBUSTERS VPS plastic guards! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Variable-height wind deflector set by BARKBUSTERS. Specifications Delivery includes two deflectors and a fastening screw kit Made of high-quality plastic material Available in black or white (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, ergonomically designed aluminium handguard kit by BARKBUSTERS. Note: Delivery does NOT include the necessary mounting kit for installation, nor the corresponding plastic covers! Specifications Delivery includes two frames Made of high-quality, tough aluminium for added strength and impact protection Choose suitable protection from VPS, Storm, JET or Carbon plastic covers (see below) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality bracket as a spare part for the BARKBUSTERS STORM hand guards STM-001 and STM-002 (available separately, see below). Available in a left or right version - please select from above. Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

BARKBUSTERS bar end mounting kit, fitting Yamaha handlebars with an internal thread. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 4 screws to fix the BARKBUSTERS plastic guards to the backbone - suitable for VPS and JET (see below). Note: This is a replacement part - the a. m. screw kit is included in the delivery scope of all original BARKBUSTERS plastic guards! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with 22mm (7/8th) handlebars.Replaces item BHG-151-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Please note: Installation on the model Husqvarna TE (Italy) up to 2013 with a 22mm Tommaselli handlebar requires the additional fixing of the 12mm Bar End Mounting Kit B-029 by BARKBUSTERS (available separately, see below). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden  Spacer 7mm B-090 KTM 790  Adventure/R  Spacer 10mm B-078 KTM 890  Adventure/R  Spacer 10mm B-078 KTM 1190 Adventure/R  Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020  Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Suitable for: BMW G650X Challenge / Moto / Country Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for Honda models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Suitable for: Honda XL600V Transalp Honda XL650V Transalp Honda XL700V Transalp Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Including Barendweights Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Suitable for: BMW R 1100 GS 259 1993 – 1999BMW R 1150 GS R21 1999 – 2004BMW R 1150 GS Adventure R21 2002 – 2005Yamaha XT 660 Z Tenere DM02 from 2008 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor