GPS/Navigation
High-quality GPS mount by the US manufacturer ALTRIDER, universally sized for the mounting on bars and tubes with a diameter of 12 mm, 14 mm, 16 mm and 22 mm. Delivery includes an AMPS pattern for BOTH orientations, i. e. portrait and landscape. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Includes an AMPS bolt pattern to securely mount any GPS units 4-hole pattern for vertical use, 2-hole pattern for horizontal use Compatible with RAM mounts (ball adapters, sizes A, B and C) and Garmin Zumo cradles Delivery includes the necessary stainless steel hardware Compatible with the ALTRIDER Yamaha Tenere 700 Cowl Support Bracket (available separately, see below) Available in anodised matte black Note: Mounting from the rear of the adapter plate is not possible, so this product is not compatible with TomTom mounts without any modifications. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality GPS mount by the US manufacturer VANASCHE, custom-made for the Husqvarna 901 Norden model. Delivery Includes the AMPS pattern in BOTH orientations (portrait and landscape). The product has also been slightly adjusted, so that no spacer kits are necessary to mount the larger GPS units. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Hands down the most rigid setup that mounts directly to the Husqvarna factory GPS location Includes AMPS bolt pattern (40 x 30 mm) to securely mount GPS units The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect position whether sitting or standing A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power Available in anodised blue Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the Husqvarna 901 Norden. The goal with this redesign was simple; to create a gps mount with angular adjustment that would not slip or rotate in the harshest conditions. The solution is a unique cogged tooth arm that engages a pocketed base platform for a rock solid fit that absolutely will NOT rotate in the hardest of impacts. Simple thumb knob allows loosening of the arm which can than be disengaged from the cogged pocket, rotated to a new viewing angle, and re-tightened. The teeth and cogs are aligned in a manner that allows adjustments in 10-degree increments both at the base and at the upper device holder. The lower joint is fixed with a hex head screw and ideally is used only for 'setup' while the upper joint can be changed via thumb knob. While infinite adjust-ability is a nice feature our experience has led us to realize it is not suitable for the hard hits we take in off-road situations. Features: CNC machined from solid billet aluminum extrusionsCeramic Bead Blasted and Anodized black for corrosion resistance AMPS bolt pattern in both Portrait and Landscape orientation (30mmx38mm) All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes x4 stainless M4 screws for device attachment Over 180-degrees of Rotatable viewing angle in 10-Degree Increments at BOTH Joints Thumb Knob can be positioned on Left or Right side Fits: Husqvarna 901 Norden Note: DOES NOT fit KTM - ModelsManufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality GPS mount* by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. *Product update: Includes the AMPS pattern in BOTH orientations (portrait and landscape). The product has also been slightly adjusted, so no spacer kits are necessary any more to mount the larger GPS units. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Hands down the most rigid setup that mounts directly to the KTM factory GPS location Includes AMPS bolt pattern (40 x 30mm) to securely mount GPS units The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect position whether sitting or standing The adjustable windscreen of the KTM 790 can be mounted in both low and high positions without GPS interference A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power Available in anodised black and orange - please select from above Suitable for: KTM 390 Adventure KTM 790 Adventure KTM 790 Adventure R KTM 790 Adventure R Rally KTM 890 Adventure 2021-2022 KTM 890 Adventure L 2021-2022 KTM 890 Adventure R Rally 2021-2022 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the KTM models listed below. The KTM 890 Adventure R/S/Rally from MY 2023 has received a facelift, so VANASCHE has developed a new device holder to hold any GPS devices, mobile phones etc. to be placed directly above the TFT display. The mount offers various features, amongst others a rotating viewing angle and a vertical adjustment, in order to put the device in the best possible location. Made from machined aluminum and hand-welded stainless steel, this product offers a much stronger quality than the plastic versions. Also included are two pairs of cable connectors to further facilitate connecting the device to the ACC power supply. The AMPS matrix can be used both horizontally and vertically. Specifications Material: High-strength 6061 aviation aluminum CNC-machined from solid billet aluminum extrusions and black anodized for corrosion resistance TIG-welded stainless steel bracket, black powder-coated All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes 4 stainless M4 screws for device attachment 90 degree rotating viewing angle 3/4" vertical adjustment 2 pairs of cable pigtails included Quick adjustability - Choose from 2 options:- Cam locking levers (cam levers made in Germany)- Thumb buttonThe locking function (cam lever or thumb button) can be located on the right or left side of the device.Cam lever vs. thumb button: - The cam lever features a stronger lock for more aggressive off-road use and is easier to access and adjust with gloves.- The thumb button is less expensive, smaller (more hidden), but harder to reach with gloves or large hands. Fits: KTM 890 Adventure S, Adventure R, Adventure Rally R – 2023-2024 model years ONLY KTM 790 - model year 2024 ONLY Note: DOES NOT fit KTM 790 2019-2020! DOES NOT fit KTM 390! DOES NOT fit DUKE models! DOES NOT fit Husqvarna Norden 901! <iframe width="800" height="450" src="https://www.youtube.com/embed/hWxvfdEwoVI" title="2023 890 GPS Mount Overview Installation and Useage" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the KTM models listed below. The goal with this redesign was simple; to create a gps mount with angular adjustment that would not slip or rotate in the harshest conditions. The solution is a unique cogged tooth arm that engages a pocketed base platform for a rock solid fit that absolutely will NOT rotate in the hardest of impacts. Simple thumb knob allows loosening of the arm which can than be disengaged from the cogged pocket, rotated to a new viewing angle, and re-tightened. The teeth and cogs are aligned in a manner that allows adjustments in 10-degree increments both at the base and at the upper device holder. The lower joint is fixed with a hex head screw and ideally is used only for 'setup' while the upper joint can be changed via thumb knob. While infinite adjust-ability is a nice feature our experience has led us to realize it is not suitable for the hard hits we take in off-road situations. Features: CNC machined from solid billet aluminum extrusionsCeramic Bead Blasted and Anodized black for corrosion resistance AMPS bolt pattern in both Portrait and Landscape orientation (30mmx38mm) All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes x4 stainless M4 screws for device attachment Over 180-degrees of Rotatable viewing angle in 10-Degree Increments at BOTH Joints Thumb Knob can be positioned on Left or Right side Fits: KTM 890 Adventure S, Adventure R, Adventure Rally R – 2023-2025 model years ONLY KTM 790 - 2024-2025 model years ONLY Note: DOES NOT fit KTM 790 2019-2020!DOES NOT fit KTM 890 2021-2022! DOES NOT fit KTM 390! DOES NOT fit DUKE models! DOES NOT fit Husqvarna Norden 901!Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor