Fuel System
Premium fuel tank filter by TwinAir, custom-made for the VANASCHE Billet Tank Cap (available separately, see below) and suitable for the below-mentioned Husqvarna and KTM models. This filter prevents any dirt particles from entering the tank during refueling. Simply insert it into the fuel tank before fastening it by the fuel filler base. It does not interfere with the OEM fuel O-Ring that keeps fuel from leaking if the bike is tipped over. Note: Regarding a few models, KTM has installed tanks with smaller filler necks covering all years of manufacture. In these cases, the petrol filter with a diameter of 39 mm is required. Please measure beforehand! Suitable for: Husqvarna 701 Enduro + SM (all) KTM 690 - 2008-2018 KTM 690 - from MY 2019 Also suitable for the OEM tanks of the following models: KTM 690 Enduro/SMC (all) Husqvarna 701 Enduro/SM - from MY 2016 KTM 1050 Adventure (all) KTM 1090 Adventure (all) KTM 1190 Adventure (all) KTM 1290 Super Adventure (all) KTM 1290 Super Duke R/GT - from MY 2017 Manufacturer TWIN AIR B.V.Eisenhowerweg 8 5466 AC Veghel, The NetherlandsHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in blue anodised Suitable for: Husqvarna 701 Enduro / SM (all) Husqvarna 701 LR "Long Range" (fits both front and rear tanks) GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM model. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro from MY 2019 NOTE: From MY 2021, the seat release has been relocated to an unfavorable position within the tank cap. In order not to have to completely unscrew the VANASCHE MOTORSPORTS tank cap every time to remove the seat, we recommend to use a cable tie to move the seat release under the rear fender (as shown in the last picture above). Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality billet tank cap by the US manufacturer VANASCHE, custom-made for the KTM 790/890 R/S/Rally models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications 100% made in the USA CNC machined from a solid piece of high-strength, aircraft grade aluminum 33% Lighter weight than OEM assembly (400g vs 600g) Provides for an easy filling of the tank without using the ignition key Filler hole is inline with fuel tank hole - properly offset like no other design on the market. No abrupt lips or edges inside filler hole to cause splashing or back spatter of fuel No counterbored holes to collect dirt Venting from side port to allow mounting of a tank bag without constricting tank breathing Delivery includes all the necessary mounting material, as well as a new Viton O-ring which is also necessary for the installation Available in black anodised Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key This unit retains the stock venting location. The original HUSQVARNA sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro 2008-18 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality replacement tank fuel cap by ZAP, made of tough aluminium. Suitable for the below-mentioned Yamaha, Kawasaki and Honda models. Specifications CNC-machined from high-grade aluminium Including special seal preventing the spillage of fuel Available in red anodised Suitable for: Yamaha YZ 125/250 - 1998-2017 YZF 250-450 - 1998-2013 Kawasaki KXF 250 - 2004-2016 KXF 450 - 2004-2015 Honda CRF from 2006 Manufacturer ZAP TechniX GmbHWaldecker Str. 8 99444 Blankenhain, GermanyHomepageDistributionoffroad-kontor