Switches

High-quality brake light and clutch switch by JMP, suitable for the below-mentioned motorcycle models. In terms of shape and function, all JMP brake light and clutch switches correspond to the OEM parts. Suitable for:  Suzuki DL 250 A V-Strom ABS      2017-2021 DL 650 A V-Strom ABS      from MY 2012 DL 650 XT A V-Strom ABS from MY 2015 Yamaha WR 125 R/X                 2009-2017 XT 660 Z Tenere         2008-2016 XTZ 700 Tenere ABS  from MY 2019 Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor

High-quality brake light switch by JMP, suitable for the below-mentioned Honda models. In terms of shape and function, all JMP brake light switches correspond to the OEM parts. Suitable for: Honda CB 500 X                             2013+ CRF 250 L/M/R/X/Rally      2013-2018 CRF 300 L/Rally                  2021+ CRF 450 L                           2019+ CRF 1000 L Africa Twin     2016-2020 Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor

Set of 2 high-quality heated grips by JMP, featuring 5 adjustable heating levels. Specifications Length of grips: 120 mm each 12V operation  Electronic control switch to be mounted either by screws or adhesion Suitable for 22mm handlebars Grips are open-ended for fixing bar weights etc. Delivery includes blanking caps and grip glue   Grip rubber compound is resistant to environmental influences and heat  Heating power adjustable as follows: Performance level 1: 41,85 W Performance Level 2: 43,74 W Performance Level 3: 44,96 W Performance Level 4: 45,5 W Performance Level 5: 45,9 W Manufacturer Johannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepageDistributionoffroad-kontor

High-quality side stand bypass dongle by the US manufacturer VANASCHE MOTORSPORTS, suitable for the below-mentioned KTM and Husqvarna models. KTM/Husqvarna have gone to great lengths to provide a side stand sensor that cannot be tampered with by not allowing any gear engagement without the side stand in the "UP" position. In spite of the undisputed safety aspect, there are a few other issues. If this sensor is to fail (or the magnet lost) while in the field, the rider will be left stranded. However, this is not a simple roadside repair, like cutting the switch off and twisting wires together or even digging up a proper resistor to temporarily alleviate the problem. This is a 50% duty cycle square wave that would be almost impossible to duplicate without the proper hardware, an oscilloscope, and the necessary knowledge in circuits/electronics.   Carrying one of these dongles on the bike provides for a little piece of mind should the OEM product fail.  WARNING: This product is to be carried as a spare part and to be used to get rider and  bike to safety when the OEM sensor fails. It is NOT to be installed while the OEM side stand sensor is operating normally, as this allows the bike to engage gears with the side stand still in the down position which can result in property damage and/or injury. Suitable for:  Husqvarna 701 - Enduro                                     MY 2016 Husqvarna 701 - Enduro & SMC & Vitpilen        from 2021 - EU models KTM 690 - Enduro & SMC                                   from 2021 - EU models KTM 690 - Enduro                                               2008 - 2018 KTM 990 Adventure R/S                                     2006 - 2013 KTM 1190 Adventure/R                                        all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality side stand bypass dongle by the US manufacturer VANASCHE MOTORSPORTS, suitable for the below-mentioned models. KTM/Husqvarna/GasGas have gone to great lengths to provide a side stand sensor that cannot be tampered with by not allowing any gear engagement without the side stand in the "UP" position. In spite of the undisputed safety aspect, there are a few other issues. If this sensor is to fail (or the magnet lost) while in the field, the rider will be left stranded. However, this is not a simple roadside repair, like cutting the switch off and twisting wires together or even digging up a proper resistor to temporarily alleviate the problem. This is a 50% duty cycle square wave that would be almost impossible to duplicate without the proper hardware, an oscilloscope, and the necessary knowledge in circuits/electronics.   Carrying one of these dongles on the bike provides for a little peace of mind should the OEM product fail.  WARNING: This product is to be carried as a spare part and to be used to get rider and  bike to safety when the OEM sensor fails. It is NOT to be installed while the OEM side stand sensor is operating normally, as this allows the bike to engage gears with the side stand still in the down position which can result in property damage and/or injury. Suitable for:  Husqvarna 701 - Enduro & SMC & Vitpilen    2017-2021 US models Husqvarna 701 - Enduro & SMC & Vitpilen    2017-2020 EU models KTM 690 - Enduro & SMC                               2019-2021 US models KTM 690 - Enduro & SMC                               2019-2020 EU models KTM 690 - Duke                                               from MY 2016 KTM 1090 Adventure                                       all KTM 1290 Adventure                                       from MY 2017 GasGas 700 Enduro + SMC  Note: Regarding the KTM 690 and Husqvarna 701 EU models from MY 2021, the corresponding dongle can be puchased here! Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor