Yamaha
High-quality front fork seal gasket set by ALL BALLS RACING including dust covers, suitable for the below-mentioned models. Specifications Improving the breakaway torque and providing up to 3x less friction than the OE parts Patented Max-Life production process, increasing the durability by 3 to 4 times Each gasket featuring 3 seals Dust covers coated with a special lubricant improving the responding qualities Suitable for: HondaCR125R 1984-1986CR250R 1982CR480R 1982Yamaha XT660 R/X 2004-2016XTZ660 1991-1995XTZ750 1989-1995YZ125 1986-1988YZ250 2T 1983-1988YZ490 1983-1990 Manufacturer All Balls Racing Products668 Gravel Pike, Suite 100 East Greenville, PA 18041, USAHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage
High-quality, adjustable side stand by ALTRIDER, custom-made for Yamaha Tenere 700 models MY 2025 and up. The ALTRIDER Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights, i. e. not only with a lowered bike, but also with a raised one. When the suspension is altered from stock height, the side stand is no longer set at the optimal angle. ALTRIDER has created a durable side stand to work with just about any suspension height. The two-piece stand is built to last and easy to adjust. Installation is simple, especially when using the spring puller included in the delivery. Specifications 100% designed and manufactured in the USAAnodized 6061-T6 billet aluminium 7 adjustable height settings, including factory height, 1 inch (2.5 cm) higher than factory, or two inches (5 cm) lower than factory Adjustable in 0.5 inch (1.25 cm) increments Convex foot ensures a large and stable contact patch, no matter the terrain or suspension height Enlarged foot, preventing the stand from sinking into soft ground Delivery includes all the necessary mounting material, as well as an upgraded spring Available in black Note: It is generally possible to do a side stand pivot. The ALTRIDER billet aluminum design is just as strong as, if not stronger than, the original YAMAHA cast aluminum side stand. Still, we do NOT recommend doing a side stand pivot, even with the OEM side stand! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality, adjustable windscreen risers by ALTRIDER, custom-made for the Yamaha Tenere 700 MY 2019-2024 (see below). The Yamaha Tenere 700 is a great all around bike for both on- and off-road riding. However, most riders find that the windscreen is just not tall enough, and are hit with wind buffeting, bugs to the visor and excess noise. To alleviate these issues, ALTRIDER designed an adjustable windscreen riser for the Yamaha Tenere 700, with a minimum 10mm rise over stock at the lowest setting and a 90mm adjustment range, for a total 100mm increase at the highest setting over the stock windscreen. Given the ultimate range of adjustment, the ALTRIDER Windscreen Riser can eliminate buffeting for a wide range of riders' heights. Specifications Designed and manufactured in the USA CNC-machined from 6061 T6 aircraft-grade aluminum Variably adjustable with a minimum height increase of 10 mm and a maximum increase of 100 mm Easy to install within minutes using the included hardware Adjustable on the fly with CNC-machined knurled thumb nuts - no tools required Laser-etched ALTRIDER "A" and "T7" logos Compatible with the ALTRIDER T7 Cowl Support (available separately, see below) as well as any GPS mounts and handlebar risers Anodized black finish Suitable for:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024NOTE: Delivery does NOT include any windscreens! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality clear headlight guard by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. Constructed in the United States from 3/16 inch (4.7 mm) thick scratch-resistant polycarbonate, the ALTRIDER headlight guard is made of extremely strong, impact-resistant polycarbonate - the same material as bullet-proof windows. This material is formulated with a hardened scratch-resistant surface, both front and rear. The dual lenses are secured with two 1/16 inch (2 mm) laser-cut textured powder coat steel brackets that are extremely resistant to rust and weathering.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets, using custom-machined aluminum ball studs and rubber sockets to mount the lens to the frame. The no-tools quick-release system allows for easy removal of the face for cleaning. NOTE: Polycarbonate will react to certain chemicals and requires specific care to be cleaned correctly and kept looking good for the long haul. Improper cleaning can result in scratches, hazing surface and cracking. Specifications 100% designed and manufactured in the USA Polycarbonate lens protects headlight without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated Suitable for:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality adjustable clutch arm extension by ALTRIDER, specifically designed for the Yamaha Tenere 700 models MY 2019-2024 as mentioned below. While the OEM Yamaha clutch arm is well designed for casual riding, technical off-road riding with heavy clutch work can quickly fatigue a rider's hand and forearm. The ALTRIDER extension helps reducing the rider's fatigue, at the same time increasing the clutch feel. Fully compatible with the OEM Yamaha crash bars! Specifications Designed and manufactured in the USA Replaces OEM clutch arm CNC machined from 6061 T6 aluminum Clevis clip is formed from stainless steel Variably adjustable Designed to reduce clutch pull by up to 33% and to increase feel Delivery includes all the necessary mounting material Available in anodized grey Suitable for:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Does NOT fit World-Raid-models!Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Stylishly designed cowl support bracket by ALTRIDER, suitable for the below-mentioned Yamaha models. All in all, the Yamaha Tenere 700 is an excellent model. However, the OEM headlight and cluster assemblies are mounted inadequately regarding any tough off-road riding, which can result in unwanted and excessive shaking and wobbling or even in a strobe light effect from the headlight on larger bumps. This typically occurs when riding down a dirt or gravel road, over a rail crossing or any other similar bumps. To assist in reducing or eliminating this unwanted shaking and to help brace the OEM headlight and cluster assembly, ALTRIDER has designed the cowl support bracket for the Tenere 700. This practical item serves to stabilize the OEM instrument panel and any accessories mounted to the cross bar, including tablets and GPS. The ALTRIDER cowl support functions as a strong link between the rear of the TFT display and the windshield brace bar, which can also be used as a GPS mount bar. Its design imparts stability by tying these items into a triangle. The instrument cluster as well as the windscreen and headlight mount points are unified by the specially formed cowl support. Specifications Made in the USA Formed from 14 gauge (0.6 "/1.6 mm thick) steel Mounts to OEM locations with both included hardware and OEM hardware Reduces movement and/or shaking of the instrument cluster and headlight wobble Available in powder-coated black and brushed silver - please select from above Suitable for:Yamaha Tenere 700 Standard 2019-2023Yamaha Tenere 700 Rally 2020-2023Yamaha Tenere 700 World Raid 2022-2023 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality fork leg guards by ALTRIDER, offering reliable protection for the Yamaha XT1200Z Super Tenere fork. The guards offer a comprehensive perimeter of coverage from forward impacts. A deliberately designed lower radius provides protection from side impacts as well. The interior mounting surface features a foam pad to prevent the fork leg guard from flexing and coming into contact with the fender. Installation takes only a few minutes with the provided hardware. Specifications All ALTRIDER products are 100% designed and manufactured in the USA 1/16 inch (1.6 mm) strong aluminum construction Delivered in pairs Suitable for the Yamaha XT1200Z Super Tenere (all model years) Delivery includes all the necessary mounting material Available in black Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality mesh headlight guard by ALTRIDER, suitable for the mentioned below Yamaha Tenere 700 models. Constructed of 1/16 inch (2 mm) laser-cut steel, this headlight guard provides total coverage for the headlight assembly without interfering with the light output. Its meticulously designed mesh pattern minimizes the loss of illumination while actually blocking any damaging debris.The headlight guard mounts to four factory hard points by way of two 1/16 inch (2 mm) laser-cut steel mounting brackets using custom-machined aluminum ball studs and rubber sockets to mount the lens to the brackets. The no-tools quick release system allows for an easy removal of the face for cleaning and the textured powder coat finish is extremely resistant to rust or weathering. Specifications 100% designed and manufactured in the USA Mesh face deflecting debris without blocking light Attaches using 4 OEM mounting points No-tools quick-release face for easy cleaning Delivery includes the necessary mounting material Available in black powder-coated Suitable for:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality pillion luggage rack by ALTRIDER, suitable for the Yamaha Tenere 700 models mentioned below. This robust and durable rack is the only offering on the market to replace the rear seat and combine with the rear luggage rack for one large continuous cargo area. Laser cut from a single piece of aluminum, the plate gets a smooth grain finish before it is formed and anodized for durability. The specially shaped cutouts on the pillion luggage rack accommodate a wide variety of hooks and straps, allowing the rider to carry almost any piece of luggage or item. All cutouts and edges are given a rounded profile to minimize wear on straps. Meanwhile, the solid top surface helps prevent water intrusion into the space below the rack. The pillion luggage rack is compatible with the factory side cases and the factory rear top box and can be installed and used with the front seat. For the ultimate carrying capacity, combine the pillion and rear racks with ALTRIDER's luggage rack system. The included stainless steel hardware makes the installation quick and easy. The pillion luggage rack is offered in a clear anodized silver finish and a black anodized finish. Specifications Laser cut from 3/16 in (4.75 mm) aluminum Specially shaped cutouts accommodate a wide variety of hooks and straps All cutouts and edges have a rounded profile Solid top surface helps prevent water intrusion Available in black and silver - please select from above Fits:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024
High-quality luggage rack by ALTRIDER, custom-made for the Yamaha Tenere 700 models mentioned below.. This unique rack is constructed from a single piece of laser-cut aluminum that is then grained to remove burrs, formed, and powder coated for a durable finish that looks great. The unique coined cutouts are specially shaped to safely accommodate a wide variety of straps and hooks, allowing to carry almost any piece of luggage or item securely. The rack is laser cut from 3/16” (4.8 mm) aluminum with CNC-routered edges that will not cut any straps. All ALTRIDER luggage racks directly integrate with ROTOPAX or OVERLAND FUEL fuel packs (available separately). The hardware is completely recessed – there is nothing to catch on the luggage. The versatile design features strategically placed cutouts to maximize tie-down points without sacrificing any strength. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 3/16” (4.8 mm) laser-cut anodized aluminum Completely smooth luggage surface Including two 3.2mm thick steel fittings ensuring a secure four-point mounting on the rear frame Interfaces with ROTOPAX or OVERLAND FUEL fuel packs Delivery includes the necessary installation hardware Available in silver or black - please select from above NOTE: Delivery does NOT include the pillion rack shown above, it is available separately!Fits:Yamaha Tenere 700 Standard 2019-2024Yamaha Tenere 700 Rally 2020-2024Yamaha Tenere 700 World Raid 2022-2024 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Stylishly designed side stand foot extension by ALTRIDER, suitable for the below-mentioned Yamaha models. This side stand extension offers a large contact surface to improve the motorcycle’s parking footprint on rough surfaces and soft grounds. Specifications Made from 1/8 inch (3.18 mm) laser-cut stainless steel Perfect fit 3D design for easy grab Minimal weight to avoid accidental deployment during riding Compatible with the center stand equipped Available in powder-coated black or brushed silver - please select from above Suitable for: Yamaha Tenere 700 from MY 2019 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality skid plate by ALTRIDER, specifically designed for the Yamaha XT 700 Z Ténéré, MY 2019 and 2020 (Euro 4). This tough 4mm aluminium sheet protects the powerful Crossplane two-cylinder of the above-mentioned model with the oil filter in the front and the header pipes as well as its vulnerable side stand switch from any damage caused by flying rocks and debris when off-roading. Delivery also includes a linkage guard made of 6mm thick HDPE plastic. This strong and durable piece mounts to four points on the above-mentioned skid plate, using all stainless steel hardware. Specifications ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of 4 mm thick, TIG hand welded aluminium Offering reliable underbody protection against stone chipping and collisions Available in a smooth silver or textured black powder coat finish - please select from above Delivery includes all stainless steel mounting material and instructions Compatible with the OEM Yamaha center stand Not compatible with TOURATECH crash bars! Fits: Yamaha Ténéré 700 - MY 2019-2020 Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
High-quality fork seal by ARIETE for Kayaba from MY 1996, made of extremely durable carboxyl elastomer (XNBR). This tough, long-lasting material features an outstanding abrasion resistance as well as an excellent temperature stability and first-class durability against all kinds of oil and other additives used for lubricating motorbike forks. Size: 46 x 58,1 x 9,5/11,5 mm Delivered in pairs Suitable for: Honda CR 125 1997-2004 CR 500 1996-2001 Kawasaki KX 125/250 1996-2001 Sherco Enduro 2004-2011 Yamaha YZ 125/250 1996-2003 YZF/WRF 250-450 1998-2003 Manufacturer SANDRO MENTASTI SRLVia Giovanni Macchi 3021100 Varese, ItalyHomepageDistributionJochen Bader MotorsportSchottstrasse 13 73084 SalachGermanyHomepage
High-quality BARKBUSTERS plastic handguards for the EGO-001 and EGO-005 handguard sets (available separately, see below).Spare-Part! Plastics are included in every EGO-001 and EGO-005 Mounting Kit. Specifications Delivery includes two handguards and a fastening screw kit Made of high-impact, extremely resistant plastic Curved profile, ideal for tight bush riding Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
BARKBUSTERS bar end mounting kit, fitting Yamaha handlebars with an internal thread. Delivery as a set (L/R). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with 22mm (7/8th) handlebars.Replaces item BHG-151-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Please note: Installation on the model Husqvarna TE (Italy) up to 2013 with a 22mm Tommaselli handlebar requires the additional fixing of the 12mm Bar End Mounting Kit B-029 by BARKBUSTERS (available separately, see below). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden Spacer 7mm B-090 KTM 790 Adventure/R Spacer 10mm B-078 KTM 890 Adventure/R Spacer 10mm B-078 KTM 1190 Adventure/R Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020 Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Including Barendweights Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Suitable for: BMW R 1100 GS 259 1993 – 1999BMW R 1150 GS R21 1999 – 2004BMW R 1150 GS Adventure R21 2002 – 2005Yamaha XT 660 Z Tenere DM02 from 2008 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for BMW and Yamaha models (see below). Specifications Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (see below) Suitable for: BMW F 700 GS E8GS (K70) from 2013 BMW F 800 GS E8GS (K72) from 2013 BMW F 800 GS Adventure E8GS (K75) from 2013 Yamaha XT1200Z Super Tenere DP01 from 2010 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned Yamaha models. Specifications Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (all available separately, see below) Suitable for: Yamaha MT 09 from MY 2013 Yamaha MT 09 SP from MY 2018 Yamaha MT 09 Tracer from MY 2014 Yamaha XSR 900 from MY 2016 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the Yamaha XT1200Z / ZE from MY 2014. Specifications Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (see below) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the Yamaha MT-07 model from MY 2013 (see below). Specifications Delivery includes two frames in powder-coated black Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Bar end weights included Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from VPS, Jet, Storm or Carbon covers (all available separately, see below) To fit: YAMAHA MT-07 from MY 2013 YAMAHA MT-07 LA from MY 2014 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor