KTM 790/890 ADV / R / Duke

High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. Available in 3 different colours - for further information, please see below. Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 3/4" (2 cm) lower than the original foot pegs 5/16" (0,8 cm) rearward compared to the original position Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Suitable for: Husqvarna 701                         all Husqvarna 901 Norden           all KTM 690                                   all KTM 790                                   all KTM 890                                   all KTM 1050/1090/1190/1290      all GasGas 700                              allYamaha 700 Tenere                 all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS mount* by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. *Product update: Includes the AMPS pattern in BOTH orientations (portrait and landscape). The product has also been slightly adjusted, so no spacer kits are necessary any more to mount the larger GPS units. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Hands down the most rigid setup that mounts directly to the KTM factory GPS location Includes AMPS bolt pattern (40 x 30mm) to securely mount GPS units The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect position whether sitting or standing The adjustable windscreen of the KTM 790 can be mounted in both low and high positions without GPS interference A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power Available in anodised black and orange - please select from above Suitable for: KTM 390 Adventure KTM 790 Adventure KTM 790 Adventure R KTM 790 Adventure R Rally KTM 890 Adventure                2021-2022 KTM 890 Adventure L             2021-2022 KTM 890 Adventure R Rally    2021-2022 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the KTM models listed below. The goal with this redesign was simple; to create a gps mount with angular adjustment that would not slip or rotate in the harshest conditions. The solution is a unique cogged tooth arm that engages a pocketed base platform for a rock solid fit that absolutely will NOT rotate in the hardest of impacts. Simple thumb knob allows loosening of the arm which can than be disengaged from the cogged pocket, rotated to a new viewing angle, and re-tightened. The teeth and cogs are aligned in a manner that allows adjustments in 10-degree increments both at the base and at the upper device holder. The lower joint is fixed with a hex head screw and ideally is used only for 'setup' while the upper joint can be changed via thumb knob. While infinite adjust-ability is a nice feature our experience has led us to realize it is not suitable for the hard hits we take in off-road situations. Features: CNC machined from solid billet aluminum extrusionsCeramic Bead Blasted and Anodized black for corrosion resistance AMPS bolt pattern in both Portrait and Landscape orientation (30mmx38mm) All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes x4 stainless M4 screws for device attachment Over 180-degrees of Rotatable viewing angle in 10-Degree Increments at BOTH Joints Thumb Knob can be positioned on Left or Right side Fits: KTM 890 Adventure S, Adventure R, Adventure Rally R – 2023+ KTM 790 Adventure / R  MY 2024-2025 ONLY Note: DOES NOT fit KTM 790 2019-2020!DOES NOT fit KTM 890 2021-2022! DOES NOT fit KTM 390! DOES NOT fit DUKE models! DOES NOT fit Husqvarna Norden 901!Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, custom-made for the KTM 790/890 R/S/Rally models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications 100% made in the USA CNC machined from a solid piece of high-strength, aircraft grade aluminum 33% Lighter weight than OEM assembly (400g vs 600g) Provides for an easy filling of the tank without using the ignition key Filler hole is inline with fuel tank hole - properly offset like no other design on the market. No abrupt lips or edges inside filler hole to cause splashing or back spatter of fuel No counterbored holes to collect dirt Venting from side port to allow mounting of a tank bag without constricting tank breathing Delivery includes all the necessary mounting material, as well as a new Viton O-ring which is also necessary for the installation Available in black anodised Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality case saver billet by the US manufacturer VANASCHE, suitable for the below-mentioned KTM- and Husqvarna-models. Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Providing optimum protection for the engine case and clutch slave cylinder Cut out to offer a view to the front sprocket condition and access to clean/remove debris (unlike the stock cover) Delivery includes mounting hardware, a sensor cover and a chain slider Also compatible with the Rekluse and Sigutech slave cylinders Maximum front sprocket size: 16 teeth Available in black, blue and orange - please select from above Suitable for: KTM 790 Adventure S KTM 790 Adventure R KTM 790 Duke KTM 890 Adventure L KTM 890 Adventure R KTM 890 Duke Husqvarna 901 Norden NOTE: Does NOT fit with TUSK skid plates! Does NOT fit with SW-MOTECH crash bars! Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place A significantly larger cross-section over the factory for more strength and less flex felt Material increase to eliminate the weak point of the OEM-lever regarding the pedal stop bolt Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 790 Adventure KTM 790 Adventure R KTM 890 Adventure KTM 890 Adventure R KTM 890 Adventure R Rally Husqvarna 901 Norden Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Machined in one piece from a 1.5" (3.8 cm) thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Corresponding MOTOMINDED ABS Cable Guide available separately Available in the following colours - please select from above: Black anodised Orange anodised Blue anodised Fits:  KTM 790/890 Adventure S/R/Rally Husqvarna 901 Norden Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

Premium shift lever by VANASCHE MOTORSPORTS made of high-quality anodized black billet aluminium featuring a coloured stainless steel folding tip, custom-made for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Extremely robust and durable Highly resistant and precisely fitting 2 mounting positions - factory and extra low position Shifter can be lowered signifancly further than the OEM lever (up to 1/2" = about 2.5 cm),  helping accommodate ergonomics with lowered footpegs Including sealed precision Japanese deep groove ball bearings Significantly larger cross-section over the factory unit, improving both strength from impacts as well as rigidity to remove the flex felt in the factory pedal Bolt-on 1/4" (6 mm) long stainless steel shift tip extension included (see image no. 6 above) for those that would like  a longer shifting tip. Just remove it if you prefer the factory length!  Available in black with a folding tip in 3 different colours - please select from above Fits: KTM 790/890 Adventure R/S/RALLY from MY 2019 Husqvarna 901 Norden Adventure & Expedition - all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor