KTM 690 Enduro/SMC

Premium fuel tank filter by TwinAir, custom-made for the VANASCHE Billet Tank Cap (available separately, see below) and suitable for the below-mentioned Husqvarna and KTM models. This filter prevents any dirt particles from entering the tank during refueling. Simply insert it into the fuel tank before fastening it by the fuel filler base. It does not interfere with the OEM fuel O-Ring that keeps fuel from leaking if the bike is tipped over.  Note: Regarding a few models, KTM has installed tanks with smaller filler necks covering all years of manufacture. In these cases, the petrol filter with a diameter of 39 mm is required. Please measure beforehand!  Suitable for: Husqvarna 701 Enduro + SM (all) KTM 690 - 2008-2018 KTM 690 - from MY 2019 Also suitable for the OEM tanks of the following models: KTM 690 Enduro/SMC  (all) Husqvarna 701 Enduro/SM - from MY 2016 KTM 1050 Adventure (all) KTM 1090 Adventure (all) KTM 1190 Adventure (all) KTM 1290 Super Adventure (all) KTM 1290 Super Duke R/GT - from MY 2017 Manufacturer TWIN AIR B.V.Eisenhowerweg 8 5466 AC Veghel, The NetherlandsHomepageDistributionJohannes J. Matthies GmbH & Co. KGHammerbrookstr. 97 20097 Hamburg, GermanyHomepage

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM model. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key The original Husqvarna sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro from MY 2019 NOTE: From MY 2021, the seat release has been relocated to an unfavorable position within the tank cap. In order not to have to completely unscrew the VANASCHE MOTORSPORTS tank cap every time to remove the seat, we recommend to use a cable tie to move the seat release under the rear fender (as shown in the last picture above). Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality billet tank cap by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Provides for an easy filling of the tank without using the ignition key This unit retains the stock venting location. The original HUSQVARNA sealing ring is used for installation Delivery includes all the necessary mounting material Available in orange and black anodised - please select from above Suitable for: KTM 690 Enduro  2008-18 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality case saver billet by the US manufacturer VANASCHE, suitable for the below-mentioned models. Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Providing optimum protection for the engine case and clutch slave cylinder Cut out to offer a view to the front sprocket condition and access to clean/remove debris (unlike the stock cover) Delivery includes the original KTM hardware and a KTM chain slider Also compatible with the Oberon, Rekluse and Sigutech slave cylinders Maximum front sprocket size: 16 teeth Available in black, blue and orange - please select from above Suitable for: KTM 690 Enduro / SMC 2008-2024 Husqvarna 701 Enduro / SM 2008-2024 GasGas 700 Enduro + SMC  2022-2024 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the below-mentioned KTM and Husqvarna models. Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 690 Enduro / Supermoto (2011-2017) Husqvarna 701 Enduro / Supermoto (2016-2019) Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the KTM 690 Enduro from MY 2019 and Husqvarna 701 Enduro + Supermoto from MY 2020 NEW: All brake pedals have been reshaped to increase strength and the levers for newer bikes equipped with quickshift no longer require the additional sensor cover replacement.  Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 690 Enduro and Supermoto from MY 2019 Husqvarna 701 Enduro + Supermoto from MY 2020 GasGas ES/SM 700 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

Rear brake pedal pad by the US manufacturer VANASCHE, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different versions - for further information, please see below. Specifications Precision-made of heavy duty, high-quality billet aluminum Surface equipped with several pressed dowel pins (PI) or screwed pins (SS) for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Available in the following versions - please select as requested: PP1 - Similar in size and height to the stock lever; mountable to both the original and the VANASCHE brake levers PP2 - Underside mounted pedal pad, slightly oversized from stock and providing an ~3/8" (1 cm) drop. Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP3 - Stepped pedal pad offering two different braking heights for sitting and standing. The upper platform level is about the same height as the stock lever, the lower platform is dropped by about 1/2" (1.3 cm). Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP4 - Oversized pad, simply offering a larger surface area over the stock pedal pad. This pad has two mounting positions, i. e. further forward or rearward Suitable for: KTM 690 Enduro + Supermoto (2011-2017) KTM 690 Enduro + Supermoto 2019+ Husqvarna 701 Enduro + Supermoto from MY 2016 Husqvarna 901 Norden GasGas 700 Enduro + SMC Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned models. Specifications Machined in one piece from a 1.25" thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Available in the following colours - please select from above: Silver (NOT anodised) Black anodised Blue anodised Suitable for: KTM 690 E/R  all MY ​Husqvarna 701  all MY GasGas 700 Enduro + SMC In order to add some protection to the dangling ABS wire, we recommend the use of a corresponding cable guide by MOTOMINDED (available separately, see below). Note: Any earlier KTM 690 models without the ABS function do not need the a. m. cable guide! Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor

High-quality side stand bypass dongle by the US manufacturer VANASCHE MOTORSPORTS, suitable for the below-mentioned KTM and Husqvarna models. KTM/Husqvarna have gone to great lengths to provide a side stand sensor that cannot be tampered with by not allowing any gear engagement without the side stand in the "UP" position. In spite of the undisputed safety aspect, there are a few other issues. If this sensor is to fail (or the magnet lost) while in the field, the rider will be left stranded. However, this is not a simple roadside repair, like cutting the switch off and twisting wires together or even digging up a proper resistor to temporarily alleviate the problem. This is a 50% duty cycle square wave that would be almost impossible to duplicate without the proper hardware, an oscilloscope, and the necessary knowledge in circuits/electronics.   Carrying one of these dongles on the bike provides for a little piece of mind should the OEM product fail.  WARNING: This product is to be carried as a spare part and to be used to get rider and  bike to safety when the OEM sensor fails. It is NOT to be installed while the OEM side stand sensor is operating normally, as this allows the bike to engage gears with the side stand still in the down position which can result in property damage and/or injury. Suitable for:  Husqvarna 701 - Enduro                                     MY 2016 Husqvarna 701 - Enduro & SMC & Vitpilen        from 2021 - EU models KTM 690 - Enduro & SMC                                   from 2021 - EU models KTM 690 - Enduro                                               2008 - 2018 KTM 990 Adventure R/S                                     2006 - 2013 KTM 1190 Adventure/R                                        all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor