KTM 890 Adventure L / R
This high-quality ALTRIDER skid plate suitable for the below-mentioned Husqvarna and KTM models is laser cut from aluminum with an anodized finish that is extremely resistant to weathering. The intelligent design features large radius corners and flared edges to provide absolute coverage for the motor, clutch pack, and stator while maintaining exceptional strength. The skid plate also provides coverage for the side stand mount, eliminating the need for a side stand relocation kit. Special consideration was made to preserve the impressive ground clearance and turning radius of the Husqvarna / KTM. The front of the skid plate mounts via steel brackets that utilize OEM mounting points, whereas the rear brackets are made of 3/16" (4.76 mm) aluminum. With the ALTRIDER design being the only one to provide anti-clocking engagement points at the rear; what this means in terms of protection is this design will resist rearward energy by interfacing the frame centerstand stops. The centerstand mounts are the strongest locations on the frame, originally engineered to take massive loads. Prevent the plate from rotating rearward is critical, without ANTI-CLOCKING the rock impacts will push the skid plate back and up into the motorcycle causing damage. ALTRIDER created the only design on the market to prevent this with the anti-clocking mounts. Specifications All ALTRIDER motorcycle accessories are 100% designed and manufactured in the USA Made of anodized aluminum that protects front and bottom of the motor from trail debris Front and rear mounts for superior strength Fits both the Adventure and Adventure R Available in silver or black - please select from above Suitable for: Husqvarna 901 Norden 2022+ KTM 790 Adventure/R 2019-2022 KTM 890 Adventure/R 2019-2022 NOTE: Skid plate does NOT fit with a center stand installed! Also does not fit any KTM-models from MY 2023! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage
Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with tapered handlebars.Replaces BHG-152-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Please note: Installation on the following models requires an additional fixing of a Spacer and Bolt Kit (available separately, see below) for the necessary brake clearance on the right side between the clamp and the backbone: Husqvarna 901 Norden Spacer 7mm B-090 KTM 790 Adventure/R Spacer 10mm B-078 KTM 890 Adventure/R Spacer 10mm B-078 KTM 1190 Adventure/R Spacer 20mm B-079 KTM 1290 Super Adventure R/S up to MY 2020 Spacer 20mm B-079(plus a possible twisting of the handlebar to avoid contact with the TFT display) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality kit by BARKBUSTERS, made for use with backbone-kits in order to ensure the necessary space / clearance between the clamp or backbone and any nearby components. Available in 3 different sizes (see below). Please select from the following sizes: 1 x 7mm spacer - 1 x bolt M8 x 35 mm 1 x 10mm spacer - 1 x bolt M8 x 35 mm 1 x 20mm spacer - 1 x bolt M8 x 45 mm 1 x 30mm spacer - 1 x bolt M8 x 55 mm Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor
High-quality, innovative modular pannier system by KRIEGA, specifically designed to fit the KTM 790 Adventure model without the need for any metal pannier frames. The OS-BASE is an 'over the seat harness' which allows KRIEGA'S OS-6, OS-12 or OS-18 Adventure Packs (all available separately, see below) to be mounted as panniers. The modular design allows to modify the luggage set-up to suit any ride - from a day’s single track to longer adventure trips. By adding an additional OS-Adventure Pack as a top bag, it is possible to extend the carrying capacity to up to 54 litres. The flexible design of the OS-BASE can also be used to mount other bags, such as the earlier model KRIEGA Overlander 15 packs, as panniers as well as the KRIEGA US-Drypacks as top bags and includes Loop Mounts to attach a tent, a sleeping mat etc. The OS-BASE is quickly and easily fixed to the bike by using the two 790 Strap Mounts and the four Alloy Spacers included in the delivery. These are screwed to the rear luggage rack in order to raise it. The two OS-Rack Loops which are also included in the delivery provide the possibility to mount a single OS Adventure Pack as a tail pack without the need of using the OS-BASE (see image above). The loops are fastened by screwing them directly to the rear luggage rack. Note: If the OS-BASE is in contact with the exhaust silencer, a heat shield needs to be fitted. For this, we recommend the use of the ENDURISTAN Inferno one (available separately). Specifications Specifically designed and manufactured for the KTM 790 Adventure model Heavy-duty Hypalon™ construction with a semi-rigid polypropylene core Very stable and lightweight Carrying capacity from 12 to 54 litres with centre pack mounting option Weight: 1150 g Quick and easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles Delivery includes 2 x 790 Strap Mounts, 2 x OS-Rack Loops and 4 Alloy Spacers 10-year guarantee - learn more Manufacturer Generator NPD LtdUnit 5 Deeside Point, Tenth AvenueZone3 Deeside Ind. Park, CH5 2UA , United KingdomHomepageDistributionGermot GmbHDaimlerstraße 463303 DreieichGermanyHomepage
High-quality ABS cable guide by the US manufacturer MOTOMINDED, custom-made for below mentioned models. Specifications Made of tough and lightweight polycarbonate (PBT) Offering reliable protection in every riding situation by covering the rear ABS cable Delivery includes the necessary mounting material (one M6 x 25mm bolt) Available in black Fits: KTM 790 Adventure. from MY 2019 KTM 790 Adventure R from MY 2019 KTM 890 Adventure. from MY 2019 KTM 890 Adventure L from MY 2019 KTM 890 Adventure R. from MY 2019 Husqvarna 901 Norden Manufacturer Motominded948 26 Rd Grand Junction, CO 81506, USAHomepageDistributionoffroad-kontor
High-quality, oversized billet foot pegs by the US manufacturer VANASCHE MOTORSPORTS, custom-made for the below-mentioned KTM, Husqvarna and Yamaha models. Available in 3 different colours - for further information, please see below. Specifications Precision-made of heavy duty, high-quality 7075 billet aluminum 3/4" (2 cm) lower than the original foot pegs 5/16" (0,8 cm) rearward compared to the original position Tread area size: 2-3/8" x 3-7/8" (60 mm x 98 mm) - depth x width Surface equipped with several screwed pins for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Suitable for: Husqvarna 701 all Husqvarna 901 Norden all KTM 690 all KTM 790 all KTM 890 all KTM 1050/1090/1190/1290 all GasGas 700 allYamaha 700 Tenere all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality GPS mount* by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. *Product update: Includes the AMPS pattern in BOTH orientations (portrait and landscape). The product has also been slightly adjusted, so no spacer kits are necessary any more to mount the larger GPS units. Specifications CNC-machined from a solid piece of 6061 alloy aluminum Hands down the most rigid setup that mounts directly to the KTM factory GPS location Includes AMPS bolt pattern (40 x 30mm) to securely mount GPS units The mount holds the GPS at the same viewing angle as the factory TFT display which provides a perfect position whether sitting or standing The adjustable windscreen of the KTM 790 can be mounted in both low and high positions without GPS interference A small machined pocket allows wiring to pass through the GPS mount base into the headlight assembly for easy termination to the pre-wired accessory power Available in anodised black and orange - please select from above Suitable for: KTM 390 Adventure KTM 790 Adventure KTM 790 Adventure R KTM 790 Adventure R Rally KTM 890 Adventure 2021-2022 KTM 890 Adventure L 2021-2022 KTM 890 Adventure R Rally 2021-2022 Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality GPS adapter by the US manufacturer VANASCHE MOTORSPORTS, fitting the KTM models listed below. The goal with this redesign was simple; to create a gps mount with angular adjustment that would not slip or rotate in the harshest conditions. The solution is a unique cogged tooth arm that engages a pocketed base platform for a rock solid fit that absolutely will NOT rotate in the hardest of impacts. Simple thumb knob allows loosening of the arm which can than be disengaged from the cogged pocket, rotated to a new viewing angle, and re-tightened. The teeth and cogs are aligned in a manner that allows adjustments in 10-degree increments both at the base and at the upper device holder. The lower joint is fixed with a hex head screw and ideally is used only for 'setup' while the upper joint can be changed via thumb knob. While infinite adjust-ability is a nice feature our experience has led us to realize it is not suitable for the hard hits we take in off-road situations. Features: CNC machined from solid billet aluminum extrusionsCeramic Bead Blasted and Anodized black for corrosion resistance AMPS bolt pattern in both Portrait and Landscape orientation (30mmx38mm) All holes in both orientations of the AMPS are threaded for M4x0.7 screws Includes x4 stainless M4 screws for device attachment Over 180-degrees of Rotatable viewing angle in 10-Degree Increments at BOTH Joints Thumb Knob can be positioned on Left or Right side Fits: KTM 890 Adventure S, Adventure R, Adventure Rally R – 2023+ KTM 790 Adventure / R MY 2024-2025 ONLY Note: DOES NOT fit KTM 790 2019-2020!DOES NOT fit KTM 890 2021-2022! DOES NOT fit KTM 390! DOES NOT fit DUKE models! DOES NOT fit Husqvarna Norden 901!Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality billet tank cap by the US manufacturer VANASCHE, custom-made for the KTM 790/890 R/S/Rally models. All VANASCHE tank caps include a corresponding braided stainless steel tethering lanyard! Specifications 100% made in the USA CNC machined from a solid piece of high-strength, aircraft grade aluminum 33% Lighter weight than OEM assembly (400g vs 600g) Provides for an easy filling of the tank without using the ignition key Filler hole is inline with fuel tank hole - properly offset like no other design on the market. No abrupt lips or edges inside filler hole to cause splashing or back spatter of fuel No counterbored holes to collect dirt Venting from side port to allow mounting of a tank bag without constricting tank breathing Delivery includes all the necessary mounting material, as well as a new Viton O-ring which is also necessary for the installation Available in black anodised Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality case saver billet by the US manufacturer VANASCHE, suitable for the below-mentioned KTM- and Husqvarna-models. Specifications CNC machined from a solid piece of high-strength, aircraft grade aluminum Providing optimum protection for the engine case and clutch slave cylinder Cut out to offer a view to the front sprocket condition and access to clean/remove debris (unlike the stock cover) Delivery includes mounting hardware, a sensor cover and a chain slider Also compatible with the Rekluse and Sigutech slave cylinders Maximum front sprocket size: 16 teeth Available in black, blue and orange - please select from above Suitable for: KTM 790 Adventure S KTM 790 Adventure R KTM 790 Duke KTM 890 Adventure L KTM 890 Adventure R KTM 890 Duke Husqvarna 901 Norden NOTE: Does NOT fit with TUSK skid plates! Does NOT fit with SW-MOTECH crash bars! Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality rear brake lever by the US manufacturer VANASCHE, suitable for the below-mentioned KTM models. Specifications Precision-made of heavy duty billet aluminum Including sealed bearings pressed in place A significantly larger cross-section over the factory for more strength and less flex felt Material increase to eliminate the weak point of the OEM-lever regarding the pedal stop bolt Installation with the OEM mounting hardware Factory pedal pad can be reused Available separately: Custom-made pedal pad by VANASCHE (see below) Lever available in silver and black - please select from above Suitable for: KTM 790 Adventure KTM 790 Adventure R KTM 890 Adventure KTM 890 Adventure R KTM 890 Adventure R Rally Husqvarna 901 Norden Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
Rear brake pedal pad by the US manufacturer VANASCHE, custom-made for the below-mentioned KTM and Husqvarna models. Available in 3 different versions - for further information, please see below. Specifications Precision-made of heavy duty, high-quality billet aluminum Surface equipped with several pressed dowel pins (PI) or screwed pins (SS) for maximum grip and braking sensation Colour: Black, blue and orange anodised (please select from above) Available in the following versions - please select as requested: PP1 - Similar in size and height to the stock lever; mountable to both the original and the VANASCHE brake levers PP2 - Underside mounted pedal pad, slightly oversized from stock and providing an ~3/8" (1 cm) drop. Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP3 - Stepped pedal pad offering two different braking heights for sitting and standing. The upper platform level is about the same height as the stock lever, the lower platform is dropped by about 1/2" (1.3 cm). Designed to be mounted to the VANASCHE levers, but with a small amount of filing it will also work with original ones PP4 - Oversized pad, simply offering a larger surface area over the stock pedal pad. This pad has two mounting positions, i. e. further forward or rearward Suitable for: KTM 690 Enduro + Supermoto (2011-2017) KTM 690 Enduro + Supermoto 2019+ Husqvarna 701 Enduro + Supermoto from MY 2016 Husqvarna 901 Norden GasGas 700 Enduro + SMC Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
High-quality rear disc guard by the US manufacturer VANASCHE, suitable for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Machined in one piece from a 1.5" (3.8 cm) thick, highly robust aluminum plate Successfully tested under the toughest conditions 100% resistant against fractures and deformation Corresponding MOTOMINDED ABS Cable Guide available separately Available in the following colours - please select from above: Black anodised Orange anodised Blue anodised Fits: KTM 790/890 Adventure S/R/Rally Husqvarna 901 Norden Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor
Premium shift lever by VANASCHE MOTORSPORTS made of high-quality anodized black billet aluminium featuring a coloured stainless steel folding tip, custom-made for the below-mentioned KTM and Husqvarna models. Specifications Made in the USA Extremely robust and durable Highly resistant and precisely fitting 2 mounting positions - factory and extra low position Shifter can be lowered signifancly further than the OEM lever (up to 1/2" = about 2.5 cm), helping accommodate ergonomics with lowered footpegs Including sealed precision Japanese deep groove ball bearings Significantly larger cross-section over the factory unit, improving both strength from impacts as well as rigidity to remove the flex felt in the factory pedal Bolt-on 1/4" (6 mm) long stainless steel shift tip extension included (see image no. 6 above) for those that would like a longer shifting tip. Just remove it if you prefer the factory length! Available in black with a folding tip in 3 different colours - please select from above Fits: KTM 790/890 Adventure R/S/RALLY from MY 2019 Husqvarna 901 Norden Adventure & Expedition - all Manufacturer Vanasche Motorsports61538 Ward Rd. Bend, OR 97702 , USAHomepageDistributionoffroad-kontor