Honda NX / XL / XR

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Universal handguard kit by BARKBUSTERS, designed to fit most trail, enduro and dual sport bikes with 22mm (7/8th) handlebars.Replaces item BHG-151-00-NP Specifications Delivery includes two frames Made of high-quality, ergonomically designed aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately, see below) Please note: Installation on the model Husqvarna TE (Italy) up to 2013 with a 22mm Tommaselli handlebar requires the additional fixing of the 12mm Bar End Mounting Kit B-029 by BARKBUSTERS (available separately, see below). Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned motorcycle models. Specifications  Delivery includes two frames, bar-end weights and a complete mounting kit for easy installation Made of heat-treated aluminium for added strength and impact protection Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (see below) Suitable for: Honda CB500X                            2013-2015 Honda NC700X                            DCT & non-DCT models Honda NC750X                            DCT & non-DCT models Honda XL1000V Varadero           all (requires the removal of the original external and internal bar weights!) Honda VFR1200X Crosstourer    non-DCT models Kawasaki KLZ1000 Versys          up to 2014 Suzuki DL650 V-Strom Suzuki DL650XT V-Strom           from 2015 Suzuki DL1000 V-Strom Suzuki DL1000XT V-Strom         up to 2017 Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality and robust handguards by BARKBUSTERS's, specifically designed for trail and enduro riders. Specifications Featuring strong, heat-treated aluminium backbones for maximum strength Ergonomic drop-down design of the backbone, ideal for bikes with long levers One pair of highly impact-resistant plastic guards included, offering reliable protection from hard dirt etc. Also included: Three axis mounting clamps for easy installation and mounting hardware to fit 22mm (7/8th) handlebars Available in various different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality rear brake pad by GALFER, made of sintered metal. Ideal for motocross and enduro riding. GALFER products are well-known for their excellent durability and high performance, even under muddy and sandy ground conditions.G1396 – The sintered metal off-road version far exceeds the ECE R90 standard. Suitable for:  Gas Gas MX                       2001-2008 EC mit Nissin       2000-2008 Honda CR 80                     1990-2002 CR 85                     2003-2007 CR 125                    1992-2001 CR 250                   1992-2001 CR 500                   1992-2000 XR 250                    1994-2002 XR 400                    1996-2004 XR 600                    1993-2010 XR 650                    2000-2007 Kawasaki KX 125               1995-2003 KX 250              1995-2009 KLX 300            1996-2007 KLX 400            2003-2004 Suzuki DR-Z 250               2001-2007 DR-Z 400               2000-2009 RM 125                   1999-2008 RM 250                   1999-2008 Yamaha YZ/WR 125        1998-2002 YZ/WR 250        1999-2002 YZ/WR 250 F     1999-2002 YZ/WR 400 F     1998-1999 YZ/WR 426 F      2000-2002 Manufacturer INDUSTRIAS GALFER, S.A.Ctra. Montmeló, 5008403 Granollers - Barcelona, SpainHomepageDistributionJochen Bader MotorsportSchottstrasse 13 73084 SalachGermanyHomepage

High-quality rear sprocket by WRP, made of tough aluminium. Suitable for the below-mentioned Honda models. Specifications CNC-machined from an ultra-strong aluminium alloy Exceptional durability guaranteed Special shape to avoid mud between teeth and chain Light-weight, stylish design Available with 46, 48 or 50 teeth - please select from above Suitable for: Honda XR R 250    1990-1997 XR R 400    1996-2000 XR 600        1991-2000 XR R 650     2000-2007 Manufacturer WIND TRADING SRLVia Dismano 114/G48124 Ravenna RA, ItalyHomepageDistributionJochen Bader MotorsportSchottstrasse 13 73084 SalachGermanyHomepage