BMW R 1300 GS

Practical set combining a skid plate with crash bars in proven ALTRIDER quality, custom-made for the BMW R1300 GS + GSA models. Available in silver and black - please select from above. The skid plate offers reliable protection against impacts of all kinds, as well as against soiling from the outside. Thanks to the new, innovative Energy Absorption System (EAS), the impact energy is distributed evenly and thus the effects of any impacts and bumps are significantly reduced. The unique shape tightly conforms to the underside of the bike, offering reliable protection for the highly sensitive headers and cross pipe.  The ALTRIDER skid plate is the only design on the market that does not rely on the engine as a mounting point, meaning that it is held in place with two custom-machined fasteners that replace the OEM center stand pins, at the same time maintaining full use of the center stand.The ALTRIDER crash bars are the only ones on the market with a tube diameter of 31.75 mm (1.25 inch). This means that the bars are more than twice as stable as crash bars with 25.4 mm (1 inch) tubes, while weighing only 10% more. The crash bars are fixed at four secure mounting points on both sides of the skid plate using 4.76 mm (3/16 inch) thick flanges. The rear upper bracket is secured with a large, specially machined M14 grade 8.8 bolt that replaces the engine mounting hardware. ALTRIDER offers the only specially machined through-bolt for increased strength available on the market. There are no plastic spacers or shock absorbers to break on impact. This creates an extremely strong connection between the crash bars and the skid plate while maintaining a narrow design that distributes any impacts and shocks evenly throughout the bars.Both the skid plate and the crash bars can also be installed individually. Specifications - Skid Plate 100% designed and manufactured in the USA Made of 4 mm (5/32 inch) thick, anodised aluminiumTIG-welded by hand Offering reliable underbody protection against stone chipping and collisions Oil change does not require removal of skid plate!One-piece construction "from wheel to wheel"Particularly high ground clearance thanks to millimetre-precise adjustmentEasy to fit - mounting parts and instructions includedFits BMW R1300 GS + GSA Available in black anodised or silver Specifications - Crash Bars100% designed and manufactured in the USAMade of stainless steel tube with a diameter of 31.75 mm (1.25 inch)5-axis laser cut with hand-welded TIG jointsCustomised M14 engine through bolt, heat-treated and coated to grade 8.8Available in black anodised or silver bead blastedATTENTION I: The upper ALTRIDER crash bars do NOT fit the BMW 1300 GS Adventure model!ATTENTION II: The lower ALTRIDER crash bars are NOT compatible with the upper OEM BMW crash bars! Note:Please contact us regarding the installation of the lower crash bar on the BMW R1300 GS Adventure, as special instructions are required. (???) Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality stainless steel crash bars by the renowned US manufacturer ALTRIDER, custom-made for the BMW R1300 GS model. Available in silver and black - please select from above. As the engine is known to be one of the most vulnerable parts in the event of a fall, ALTRIDER has developed these crash bars, which have been designed to withstand the highest loads and to offer significant protection for the engine and its vulnerable cast parts.The ALTRIDER crash bars are the only ones on the market with a tube diameter of 31.75 mm (1.25 inch). This means that the bars are more than twice as stable as crash bars with 25.4 mm (1 inch) tubes, while weighing only 10% more. The crash bars are fixed at four secure mounting points on both sides of the skid plate using 4.76 mm (3/16 inch) thick flanges.The rear upper bracket is secured with a large, specially machined M14 grade 8.8 bolt that replaces the engine mounting hardware. ALTRIDER offers the only specially machined through-bolt for increased strength available on the market. There are no plastic spacers or shock absorbers to break on impact. This creates an extremely strong connection between the crash bars and the skid plate while maintaining a narrow design that distributes any impacts and shocks evenly throughout the bars.Specifications All ALTRIDER products are 100% designed and manufactured in the USAMade of stainless steel tubes with a diameter of 31.75 mm (1.25 inches)5-axis laser cut with hand-welded TIG connectionsCustomised M14 engine through-bolt, heat-treated and coated to grade 8. 8Compatible with the cylinder head guard option 719 (???) and the original BMW Standard and Rally skid platesDelivery includes all mounting materialAvailable in black anodised and silver bead blastedFits BMW R1300 GSATTENTION: The lower ALTRIDER crash bars are NOT compatible with the upper OEM crash bars from BMW! Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality foot brake system by ALTRIDER, offering substantially more braking safety and comfort during off-road riding. Custom-made for the  BMW R 1300 GS model. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If the riders' feet are not already situated correctly on the rear brake pedal, they are potentially doubling reaction time and distance to make what could be a critical stop. This is why all motorcycle racers have 1 or 2 fingers on the front brake lever in photographs. ALTRIDER has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the ALTRIDER DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate. Riser When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of the foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the ALTRIDER enlarger and riser combined, there are now two levels in which to engage the rear brake, putting the foot in an optimal position regardless of the riding position. As every rider is different, there are two riser heights available depending on the riding style. For those needing additional customization, risers can also be swapped out. Enlarger The ever-changing terrain of off-road riding means the entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives the foot a greater surface area to work with, affording the rider more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization. Specifications 100% designed and manufactured in the USAStainless steel bottom plate and hardware to endure the abrasions of off-road riding 25.4 mm riser height available Pins provided with enlarger for enhanced grip, extras included Enlarger and riser available in black or silver (please select from above) Patent Pending Fits BMW R1300 GS Note: Does not fit with the Adventure- or flip-down-levers like the option 719 or shadow brake lever. See photo for details. Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

High-quality skid plate by ALTRIDER, specifically designed for the BMW R1300 GS / GSA models. This tough and robust skid plate offers reliable protection against impacts of all kinds, as well as against soiling from the outside. Thanks to the new, innovative Energy Absorption System (EAS), the impact energy is distributed evenly and thus the effects of any impacts and bumps are significantly reduced. The unique shape of the skid plate tightly conforms to the underside of the bike, offering reliable protection for the highly sensitive headers and cross pipe.  Each part of the EAS is moulded to match the complex shape of the underside of the BMW R1300 engine. By this, a surface area of around 89 square centimetres is created which dissipates the energy of an impact. In addition, the EAS has a differing density to optimise the shock absorption. The differing density is comparable to a progressive suspension: the stronger the impact, the more resistance the EAS offers. All EAS parts are made of a specially developed elastomer that withstands high temperatures and harsh driving conditions.The ALTRIDER skid plate is the only design on the market that does not rely on the engine as a mounting point, meaning that it is held in place with two custom-machined fasteners that replace the OEM center stand pins, at the same time maintaining full use of the center stand.Specifications 100% designed and manufactured in the USAMade of 4 mm (5/32 inch) thick, anodised aluminiumTIG-welded by hand4 stainless steel fastenings at factory mounting points with rubber mounts for better force distribution and an above-average, long-lasting durability3 different zones of the Energy Absorption System (EAS) in the centre sectionOffering reliable underbody protection against stone chipping and collisionsParticularly high ground clearance thanks to millimetre-precise adjustmentOil change does not require removal of skid plate!Easy to fit - mounting parts and instructions includedFits BMW R1300 GS + GSAAvailable in black anodised or silver Manufacturer AltRider3708 Airport Way SouthSeattle, WA 98134-2217, USAHomepageDistribution:AltRiderSpectrumlaan 312665 NM BleiswijkNetherlandsHomepage

Tough and robust fabric hand guard kit by BARKBUSTERS, providing maximum protection against wind and weather. Specifications Stylish fabric hand guard design, lined with a waterproof membrane Delivered in pairs Can be fitted to almost any handlebar set-up Flexes around fairing/windscreen at full steering lock Ideal for faired sports and touring motorcycles Anti-flap design - self-supporting under wind pressure Leaves controls free of interference Maximum cold weather protection Can be fitted to handlebar weights, as well as to hollow handlebars and over existing BARKBUSTERS BHG backbones (available separately) Delivery includes all necessary mounting hardware and instructions Available in black-grey Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough handguards by BARKBUSTERS made of high-quality carbon fiber, providing excellent protection from the elements. Specifications Delivery includes two handguards and a fastening screw kit Finished with a UV stable gloss-coated resin Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately) NOT recommended for off-road applications! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality, robust aluminium frame for the mounting of BARKBUSTERS handguards, specifically designed for the below-mentioned BMW models. Specifications  Delivery includes two frames Made of heat-treated aluminium for added strength and impact protection Complete mounting kit included for easy installation Note: This product does NOT include the corresponding plastic covers! Choose suitable protection from Jet, VPS, Storm or Carbon covers (all available separately) Suitable for:  BMW R1300GS                                                    2024+ BMW R1300GS ADVENTURE                             2025+ BMW R1300GS TROPHY                                    2024+ BMW R1300GS ADVENTURE TROPHY             2025+ BMW R1300GS TRIPLE BLACK                          2024+ BMW R1300GS ADVENTURE TRIPLE BLACK   2025+ BMW R1300GS TROPHY X                                  2024+ BMW R1300GS ADVENTURE TROPHY X          2025+ Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality BARKBUSTERS plastic handguards for JET-001 and JET-002 (available separately, see below).Fits all BHG-Kits also. Specifications Delivery includes two handguards and a fastening screw kit Available in many different colours (please select from above) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical LED amber light indicators by BARKBUSTERS. Specifications Ideal for use as a turn indicator Can be fitted to the upper surface only of JET guards Can be fitted to the upper and/or lower surface of VPS and STORM guards (all BARKBUSTERS hand guards available separately, see below) E-mark approved as an indicator light 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users May require optional resistor for correct flash rate (code: LED-RES-001, available separately - see below) NOTE: NOT compatible with the HONDA CRF 1000L Africa Twin electrical system! Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical white LED position lights by BARKBUSTERS, specifically designed to be used for the below-mentioned hand guards. Specifications 15 super bright LED’s per light Low power draw Substantial increase of visibility to other road users E-mark approved (no. E8 50R-001526) To be used for the following BARKBUSTERS hand guards (all available separately, see below): JET guards (on upper surface only) VPS and STORM guards (on upper and/or lower surface) Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Set of 2 high-quality, practical resistors, specifically designed to be used for the BARKBUSTERS LED Amber Light Indicators if required to correct the flash rate (indicators and handguards available separately, see below). Specifications Resistance: 10 Ohm To fit in conjunction with the BARKBUSTERS LED Amber Light Indicators (available separately, see below) where necessary to correct the flash rate - the recommended flash rate is 90 (+/-30) times per minute Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS, providing excellent protection from the elements.Fits all Storm-Kits as a spare and all BHG-Kits as an accessory. Specifications Delivery includes two handguards and a fastening screw kit (Last picture shows package contents) Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (available separately, see below) Available in black and white Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

High-quality VPS skid plate set by BARKBUSTERS. Specifications Delivery includes two pads Protects the outer edge of the aluminium backbone Adds a stylish finish to the handguard Suitable for VPS and Jet plastics (available separately, see below) Note: Does NOT fit with Storm plastics! Available in black Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor

Tough plastic handguards by BARKBUSTERS with variable height wind deflectors. Specifications Delivery includes two handguards and a fastening screw kit Can be fitted to all BARKBUSTERS VPS handguard alloy backbones (BHG mounting kits) Available in various different colours (please select from above) Other colours on request Manufacturer:Rideworx Pty Ltd3/7 Luso Dr, Unanderra NSW 2526, AustraliaHomepageDistribution: offroad-kontor